Fixed indentation error for a sub-bullet point

[AGL/documentation.git] / docs / 0_Getting_Started / 2_Building_AGL_Image / 1_Preparing_Your_Build_Host.md

diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md b/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md
index 74877b0..780a0e4 100644 (file)
--- a/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md
+++ b/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md
@@ -6,7 +6,7 @@ Preparing your build host so that it can build an AGL image means
 making sure your system is set up to use the
 [Yocto Project](https://yoctoproject.org) OpenEmbedded build system,
 which is based on
-[BitBake](https://yoctoproject.org/docs/3.1.2/bitbake-user-manual/bitbake-user-manual.html).
+[BitBake](https://yoctoproject.org/docs/3.1.4/bitbake-user-manual/bitbake-user-manual.html).
 
 This section presents minimal information so you can prepare the build host
 to use the "Dunfell" version of the Yocto Project (i.e. version 3.1.2).
@@ -17,42 +17,31 @@ the Yocto Project documentation
 **NOTE:** This entire section presumes you want to build an image.
 You can skip the entire build process if you want to use a ready-made
 development image.
-The [supported images](https://download.automotivelinux.org/AGL/snapshots/master/latest/) exist for several boards as
+The [supported images](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/) exist for several boards as
 well as for the Quick EMUlator (QEMU).
 See the
-"[Quickstart](../1_Quickstart/Quickstart.md)"
+"[Quickstart](../1_Quickstart/Using_Ready_Made_Images.md)"
 section for more information on the ready-made images.
 
 1. **Use a Supported Linux Distribution:** To use the AGL software, it is
    recommended that your build host is a native Linux machine that runs a
    Yocto Project supported distribution as described by the
-   "[Supported Linux Distributions](https://www.yoctoproject.org/docs/3.1.2/ref-manual/ref-manual.html#detailed-supported-distros)"
+   "[Supported Linux Distributions](https://www.yoctoproject.org/docs/3.1.14/ref-manual/ref-manual.html#detailed-supported-distros)"
    section in the Yocto Project Reference Manual.
    Basically, you should be running a recent version of Ubuntu, Fedora, openSUSE,
    CentOS, or Debian.
 
-   If you must use a build host that is not a native Linux machine, you can
-   install and use Docker to create a container that allows you to work as
-   if you are using a Linux-based host.
-   The container contains the same development environment (i.e. distros, packages,
-   and so forth) as would a properly prepared build host running a supported
-   Linux distribution.
-   For information on how to install and set up this Docker container, see the
-   "[Setting Up a Docker Container -- FIX ME](./docker-container-setup.html)"
-   section.
-
 2. **Be Sure Your Build Host Has Enough Free Disk Space:**
    Your build host should have at least 100 Gbytes.
 
-3. **Be Sure Tools are Recent:**  You need to have recent versions for
-   the following tools:
+3. **Be Sure Tools are Recent:**  You need to have recent versions for the following tools:
 
-   * Git 1.8.3.1 or greater
-   * Tar 1.27 or greater
-   * Python 3.4.0 or greater
+      - Git 1.8.3.1 or greater
+      - Tar 1.27 or greater
+      - Python 3.4.0 or greater
 
    If your distribution does not meet these minimal requirements, see the
-   "[Required Git, tar, and Python Versions](https://www.yoctoproject.org/docs/3.1.2/ref-manual/ref-manual.html#required-git-tar-and-python-versions)"
+   "[Required Git, tar, and Python Versions](https://www.yoctoproject.org/docs/3.1.14/ref-manual/ref-manual.html#required-git-tar-and-python-versions)"
    section in the Yocto Project Reference Manual for steps that you can
    take to be sure you have these tools.
 
@@ -61,13 +50,13 @@ section for more information on the ready-made images.
    Depending on the Linux distribution you are using, the list of
    host packages differ.
    See
-   "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.2/yocto-project-qs/yocto-project-qs.html#packages)"
+   "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.14/yocto-project-qs/yocto-project-qs.html#packages)"
    section of the Yocto Project Quick Start for information on the packages you need.
 
    **NOTE:** If you are using the CentOS distribution, you need to
    separately install the epel-release package and run the `makecache` command as
    described in
-   "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.2/yocto-project-qs/yocto-project-qs.html#packages)"
+   "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.14/yocto-project-qs/yocto-project-qs.html#packages)"
    section of the Yocto Project Quick Start.
 
    Aside from the packages listed in the previous section, you need the following: