Fixing the index numbering

[AGL/documentation.git] / docs / 0_Getting_Started / 2_Building_AGL_Image / 0_Build_Process.md

diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/0_Build_Process.md b/docs/0_Getting_Started/2_Building_AGL_Image/0_Build_Process.md
deleted file mode 100644 (file)
index f1a48c7..0000000
--- a/docs/0_Getting_Started/2_Building_AGL_Image/0_Build_Process.md
+++ /dev/null
@@ -1,33 +0,0 @@
----
-title: Build Process Overview
----
-
-The AGL image development workflow consists of setting up
-the system (i.e. the build host) that builds the image and finishes with
-using the
-[Yocto Project](https://yoctoproject.org) to create an image
-targeted towards specific hardware.
-
-The following figure and list overview the AGL image development
-process.
-You can learn about the steps in the process by reading through the
-remaining sections.
-
-**NOTE:** This procedure uses information from many other procedures
-in the AGL Documentation set.
-Links are provided when a set of steps is required that is documented
-elsewhere.
-
-![](images/image-developer-workflow.png)
-
-1. Prepare your build host to be able to use the tools needed to build your image.
-
-2. Download the AGL software into a local Git repository on your build host.
-
-3. Run the build environment script to initialize variables and paths needed for the build.
-
-4. Make sure your build configuration is defined exactly how you want it for your build.
-
-5. Use
-   [BitBake](https://docs.yoctoproject.org/bitbake.html)
-   to build your image.