- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
### 2. Virtual Box (Emulation)
+**NOTE :** Please note [https://www.virtualbox.org/ticket/19873](https://www.virtualbox.org/ticket/19873) as this affects the VMs resolution.
+The AGL demo images do require 1920x1080. The instructions below have been adapted.
+
1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz).
2. Install and set up [Virtual Box](https://www.virtualbox.org/wiki/Linux_Downloads).
![vbox-step-4](images/vbox-4.png)
- Go to `Storage`, and change the attribute to `Type : AHCI` and click on `OK`.
![vbox-step-5](images/vbox-5.png)
- - Click on `Start`.
+ - Next go to `Display` and change the attribute to 'VMSVGA' for the graphics driver. Change the graphics memory to be at least 64MB.
+ - **Important:**: Open a new terminal window and execute this command:
+ ```sh
+ VBoxManage setextradata agl-demo VBoxInternal2/EfiGraphicsResolution 1920x1080
+ ```
+ - Return to the UI and click on `Start`.
- For troubleshooting, you can refer [here](https://lists.automotivelinux.org/g/agl-dev-community/message/8474).
### 3. x86 physical system
$ xz -v -d agl-demo-platform-crosssdk-qemuarm.ext4.xz
```
-7. Launch QEMU with vinagre (for scaling), remove `- snapshot \` if you want to save changes to the image files :
+7. Launch QEMU with vinagre (for scaling), remove `- snapshot` if you want to save changes to the image files :
```sh
$ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
### 3. R-Car H3SK (H3ULCB board)
-**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required.
+**NOTE :** The prebuilt image does support **non-accelerated** graphics mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required.
1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
- 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz).
+ 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz).
3. Extract the image into the boot device :
```sh
$ lsblk
$ sudo umount <boot_device_name>
- $ xzcat agl-image-ivi-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M
+ $ xzcat agl-demo-platform-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M
$ sync
```