### 1. QEMU (Emulation)
-1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz).
+1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz).
-2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/bzImage).
+2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/koi/latest/qemux86-64/deploy/images/qemux86-64/bzImage).
3. Install [QEMU](https://www.qemu.org/download/) :
- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
### 2. Virtual Box (Emulation)
- 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz).
+**NOTE :** Please note [https://www.virtualbox.org/ticket/19873](https://www.virtualbox.org/ticket/19873) as this affects the VMs resolution.
+The AGL demo images do require 1920x1080. The instructions below have been adapted.
+
+ 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/release/koi/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz).
2. Install and set up [Virtual Box](https://www.virtualbox.org/wiki/Linux_Downloads).
![vbox-step-4](images/vbox-4.png)
- Go to `Storage`, and change the attribute to `Type : AHCI` and click on `OK`.
![vbox-step-5](images/vbox-5.png)
- - Click on `Start`.
+ - Next go to `Display` and change the attribute to 'VMSVGA' for the graphics driver. Change the graphics memory to be at least 64MB.
+ - **Important:**: Open a new terminal window and execute this command:
+ ```sh
+ VBoxManage setextradata agl-demo VBoxInternal2/EfiGraphicsResolution 1920x1080
+ ```
+ - Return to the UI and click on `Start`.
- For troubleshooting, you can refer [here](https://lists.automotivelinux.org/g/agl-dev-community/message/8474).
### 3. x86 physical system
**NOTE :** UEFI enabled system is required.
- 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz).
+ 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz).
2. Extract the image into USB drive :
### 1. QEMU (Emulation)
-1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz).
+1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz).
-2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/zImage).
+2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/koi/latest/qemuarm/deploy/images/qemuarm/zImage).
3. Install [QEMU](https://www.qemu.org/download/) :
$ xz -v -d agl-demo-platform-crosssdk-qemuarm.ext4.xz
```
-7. Launch QEMU with vinagre (for scaling), remove `- snapshot \` if you want to save changes to the image files :
+7. Launch QEMU with vinagre (for scaling), remove `- snapshot` if you want to save changes to the image files :
```sh
$ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
### 2. BeagleBone Enhanced (BBE)
- 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/bbe/deploy/images/bbe/agl-demo-platform-crosssdk-bbe.wic.xz).
+ 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/bbe/deploy/images/bbe/agl-demo-platform-crosssdk-bbe.wic.xz).
2. Extract the image into the SD card of BeagleBone Enhanced :
### 1. QEMU (Emulation)
-1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz).
+1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz).
-2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/Image).
+2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/koi/latest/qemuarm64/deploy/images/qemuarm64/Image).
3. Install [QEMU](https://www.qemu.org/download/) :
- Login into AGL :
```sh
- Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+ Automotive Grade Linux 11.0.0+snapshot qemux86-64 ttyS1
qemux86-64 login: root
```
### 2. Raspberry Pi 4
- 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz).
+ 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz).
2. Extract the image into the SD card of Raspberry Pi 4 :
**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required.
- 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
+ 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/koi/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
- 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz).
+ 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/koi/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz).
3. Extract the image into the boot device :