Prepare octopus branch for documentation

[AGL/documentation.git] / docs / 01_Getting_Started / 02_Building_AGL_Image / 04_Initializing_Your_Build_Environment.md

diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md b/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md
index efe7001..8865a02 100644 (file)
--- a/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md
+++ b/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md
@@ -10,7 +10,7 @@ run to initialize the build environment.
 You can find this script here:
 
 ```sh
-$AGL_TOP/master/meta-agl/scripts/aglsetup.sh
+$AGL_TOP/octopus/meta-agl/scripts/aglsetup.sh
 ```
 
 The script accepts many options that allow you to define build parameters such
@@ -18,7 +18,7 @@ as the target hardware (i.e. the machine), build directory, and so forth.
 Use the following commands to see the available options and script syntax:
 
 ```sh
-$ cd $AGL_TOP/master
+$ cd $AGL_TOP/octopus
 $ source meta-agl/scripts/aglsetup.sh -h
 ```
 
@@ -160,7 +160,7 @@ Following are brief descriptions of the AGL features you can specify on the
   sdcards. Needs additional setup.
 
 * **agl-ptest**: Enables
-  [Ptest](https://yoctoproject.org/docs/3.1.4/dev-manual/dev-manual.html#testing-packages-with-ptest)
+  [Ptest](https://docs.yoctoproject.org/dev-manual/common-tasks.html#testing-packages-with-ptest)
   as part of the build.
 
 * **agl-demo**: Enables the layers meta-agl-demo and meta-qt5.
@@ -222,7 +222,7 @@ Common targets are:
 
 Running the script creates the Build Directory if it does not already exist.
 The default Build Directory is `$AGL_TOP/<release-branch-name>/build`, and the nomenclature to be used throughout this doc is going to be `$AGL_TOP/<release-branch-name>/<build-dir>`
-For this example, the Build Directory is `$AGL_TOP/master/qemux86-64`.
+For this example, the Build Directory is `$AGL_TOP/octopus/qemux86-64`.
 
 The script's output also indicates the machine and AGL features selected for the build.
 
@@ -246,10 +246,10 @@ You can find lots of information on configuring builds in the Yocto Project
 documentation set.
 Here are some references if you want to dig into configuration further:
 
-* [Customizing Images Using local.conf](https://yoctoproject.org/docs/3.1.4/dev-manual/dev-manual.html#usingpoky-extend-customimage-localconf)
-* [Local](https://yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#ref-varlocality-config-local)
-* [build/conf/local.conf](https://yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#structure-build-conf-local.conf)
-* [build/conf/bblayers.conf](https://yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#structure-build-conf-bblayers.conf)
-* [BBLAYERS](https://yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#var-BBLAYERS)
-* [User Configuration](https://yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#user-configuration)
-* [Enabling Your Layer](https://yoctoproject.org/docs/3.1.4/dev-manual/dev-manual.html#enabling-your-layer)
+* [Customizing Images Using local.conf](https://docs.yoctoproject.org/dev-manual/common-tasks.html#customizing-images-using-local-conf)
+* [Local](https://docs.yoctoproject.org/ref-manual/varlocality.html#local)
+* [build/conf/local.conf](https://docs.yoctoproject.org/ref-manual/structure.html#build-conf-local-conf)
+* [build/conf/bblayers.conf](https://docs.yoctoproject.org/ref-manual/structure.html#build-conf-bblayers-conf)
+* [BBLAYERS](https://docs.yoctoproject.org/ref-manual/variables.html#term-BBLAYERS)
+* [User Configuration](https://docs.yoctoproject.org/ref-manual/structure.html#build)
+* [Enabling Your Layer](https://docs.yoctoproject.org/dev-manual/common-tasks.html#enabling-your-layer)