Update screenshot test for multiple images.

[src/qa-testdefinitions.git] / common / scripts / test_can_bitrate.sh

diff --git a/common/scripts/test_can_bitrate.sh b/common/scripts/test_can_bitrate.sh
index 6802714..11b265d 100755 (executable)
--- a/common/scripts/test_can_bitrate.sh
+++ b/common/scripts/test_can_bitrate.sh
@@ -1,34 +1,35 @@
 #!/bin/sh
 
 #This test is writen taking the DRA7xx-EVM board as an example
+#these tests will be skipped if 2 interfaces are not detected.
 #Theorical values of bitrate is from 1Kbit/s to 1Mbit/s
 #Real values to provide transmission are between 10797 bit/s and 1909090git bit/s
 #Real values that doesn't provide transmission but belong to the domain are between 781 bit/s and 5209999 bit/s
 
 if [ ! -e /sys/class/net/can1 ];then
-       lava-test-case canconfig_can0_bitrate --result skip
-       lava-test-case receive_frames_through_can1 --result skip
-       lava-test-case receive_frames_through_can1 --result skip
-       lava-test-case receive_frames_through_can1 --result skip
-       lava-test-case canconfig_can0_bitrate --result skip
-       lava-test-case receive_frames_through_can1 --result skip
+       lava-test-case can0_bitrate_range_start --result skip
+       lava-test-case can1_bitrate_range_start --result skip
+       lava-test-case can1_xfer_config_range_start --result skip
+       lava-test-case can1_xfer_tx_range_start --result skip
+       lava-test-case can1_xfer_tx_range_end  --result skip
+       lava-test-case can0_bitrate_range_end --result skip
        exit 0
 fi
 
 #This is the first part of the test, that tests if the bitrate inserted belongs to the domain and if
 #this first bitrate afford frames transmission or not
-canconfig can0 stop
+ip link set can0 down
 if [ $? -eq 0 ];then
-        lava-test-case stop_can0 --result pass
+    lava-test-case stop_can0 --result pass
 else
-        lava-test-case stop_can0 --result fail
+    lava-test-case stop_can0 --result fail
 fi
 sleep 2
-canconfig can1 stop
+ip link set can1 down
 if [ $? -eq 0 ];then
-        lava-test-case stop_can1 --result pass
+    lava-test-case stop_can1 --result pass
 else
-        lava-test-case stop_can1 --result fail
+    lava-test-case stop_can1 --result fail
 fi
 sleep 2
 
@@ -36,27 +37,27 @@ sleep 2
 
 found_bitrate=0
 for b in `seq 778 790`;do
-       canconfig can0 bitrate $b
+       ip link set can0 type can bitrate $b
        x=$?
        if [ $x -eq 0 ];then
-               lava-test-case can0_bitrate --result pass --measurement $b --units bit/s
+               lava-test-case can0_bitrate_range_start --result pass --measurement $b --units bit/s
                echo "$b is the first bitrate in the domain"
                found_bitrate=1
-               canconfig can1 bitrate $b
+               ip link set can1 type can bitrate $b
                if [ $? -eq 0 ];then
-                       lava-test-case can1_bitrate --result pass --measurement $b --units bit/s
+                       lava-test-case can1_bitrate_range_start --result pass --measurement $b --units bit/s
                else
-                       lava-test-case can1_bitrate --result fail --measurement $b --units bit/s
+                       lava-test-case can1_bitrate_range_start --result fail --measurement $b --units bit/s
                fi
                sleep 2
-               canconfig can0 start
+               ip link set can0 up
                if [ $? -eq 0 ];then
                        lava-test-case start_can0 --result pass
                else
                        lava-test-case start_can0 --result fail
                fi
                sleep 2
-               canconfig can1 start
+               ip link set can1 up
                if [ $? -eq 0 ];then
                        lava-test-case start_can1 --result pass
                else
@@ -64,58 +65,59 @@ for b in `seq 778 790`;do
                fi
                sleep 2
                file_can=$(mktemp)
-               cansequence -p can0 &
+               cangen can0 &
                candump can1 > $file_can &
                sleep 3
                if [ -s $file_can ];then
-                       lava-test-case Receive_can1 --result pass --measurement $b --units bit/s
+                       lava-test-case can1_xfer_config_range_start --result fail --measurement $b --units bit/s
                else
-                       lava-test-case Receive_can1 --result fail --measurement $b --units bit/s
+                       lava-test-case can1_xfer_config_range_start --result pass --measurement $b --units bit/s
                        sleep 2
                        echo "This bitrate $b belongs to the domain but doesn't provide frames transmission"
-                       break
                fi
                rm $file_can
+               break
        fi
 done
 
 if [ $found_bitrate -eq 0 ];then
-       lava-test-case can0_bitrate --result fail --measurement $b --units bit/s
+       lava-test-case can0_bitrate_range_start --result fail --measurement $b --units bit/s
        sleep 2
        echo "There is no supportable bitrate in this interval"
 fi
-canconfig can0 stop
-canconfig can1 stop
+ip link set can0 down
+ip link set can1 down
 sleep 2
 #This is the second part of the test, it tests the first bitrate to provide frames transmission
 
-canconfig can0 stop
-canconfig can1 stop
+ip link set can0 down
+ip link set can1 down
 found_bitrate_for_transmisson=0
 for b in `seq 10790 10800`;do
-        canconfig can0 bitrate $b
-        canconfig can1 bitrate $b
-        canconfig can0 start
-        canconfig can1 start
-        sleep 3
-        file_can=$(mktemp)
-       cansequence -p can0 &
+    ip link set can0 type can bitrate $b
+    ip link set can1 type can bitrate $b
+    ip link set can0 up
+    ip link set can1 up
+    sleep 3
+    file_can=$(mktemp)
+       cangen can0 &
        candump can1 > $file_can &
        sleep 4
-        if [ -s $file_can ];then
+    if [ -s $file_can ];then
                found_bitrate_for_transmisson=1
-               lava-test-case Receive_can1 --result pass --measurement $b --units bit/s
-               sleep 2
+               lava-test-case can1_xfer_tx_range_start --result pass --measurement $b --units bit/s
+        sleep 2
                echo "$b is the first supportable bitrate to provide transmission"
+               rm $file_can
                break
        fi
-       canconfig can0 stop
-       canconfig can1 stop
+       ip link set can0 down
+       ip link set can1 down
        rm $file_can
 done
 
 if [ $found_bitrate_for_transmisson -eq 0 ];then
-       lava-test-case Receive_can1 --result fail --measurement $b --units bit/s
+       lava-test-case can1_xfer_tx_range_start --result fail --measurement $b --units bit/s
        sleep 2
        echo "There is no bitrate in this interval to provide frames transmission"
 fi
@@ -123,54 +125,52 @@ fi
 
 #This is the third part of the test, it tests the last bitrate to provide frames transmission
 
-canconfig can0 stop
-canconfig can1 stop
+ip link set can0 down
+ip link set can1 down
 bitrate_no_transmission=0
 for b in `seq 1909088 1909092`;do
-        canconfig can0 bitrate $b
-        canconfig can1 bitrate $b
-        canconfig can0 start
-        canconfig can1 start
-        sleep 2
-        file_can=$(mktemp)
-        cansequence -p can0 &
-        candump can1 > $file_can &
-        sleep 3
+    ip link set can0 type can bitrate $b
+    ip link set can1 type can bitrate $b
+    ip link set can0 up
+    ip link set can1 up
+    sleep 2
+    file_can=$(mktemp)
+    cangen can0 &
+    candump can1 > $file_can &
+    sleep 3
        size=$(stat -c %s $file_can)
        if [ $size -eq 0 ];then
                bitrate_no_transmission=1
-               B=($b-1)
-               lava-test-case Receive_can1 --result pass --measurement $B --units bit/s
-               lava-test-case Receive_can1 --result fail --measurement $b --units bit/s
+               lava-test-case can1_xfer_tx_range_end --result pass --measurement $(($b-1)) --units bit/s
                sleep 2
                echo "This bitrate $b doesn't provide frames transmission"
                echo "The last bitrate to provide frames transmission is $(($b-1))"
                break
        fi
-       canconfig can0 stop
-       canconfig can1 stop
-        rm $file_can
+       ip link set can0 down
+       ip link set can1 down
+    rm $file_can
 done
 
 if [ $bitrate_no_transmission -eq 0 ];then
-       lava-test-case Receive_can1 --result pass --measurement $b --units bit/s
-       echo "All bitrates in this interval provide frames transmission"
-       canconfig can0 stop
-       canconfig can1 stop
+       lava-test-case can1_xfer_tx_range_end --result skip --measurement $b --units bit/s
+       echo "All bitrates in this interval provide frames transmission, the last bitrate not found in this range"
+       ip link set can0 down
+       ip link set can1 down
 fi
 
 #This is the last part of the test, it tests the last bitrate that belongs to the domain
 sleep 3
-canconfig can0 stop
-canconfig can1 stop
+ip link set can0 down
+ip link set can1 down
 out_of_domain=0
 for b in `seq 5290999 5291000`;do
-       canconfig can0 bitrate $b
+       ip link set can0 type can bitrate $b
        x=$?
        sleep 2
        if [ $x -ne 0 ];then
                out_of_domain=1
-               lava-test-case can0_bitrate --result fail --measurement $b --units bit/s
+               lava-test-case can0_bitrate_range_end --result pass --measurement $(($b-1)) --units bit/s
                echo "$b is the first bitrate to be out of the domain"
                echo "The last bitrate to belong to the domain is $(($b-1))"
                break
@@ -178,7 +178,7 @@ for b in `seq 5290999 5291000`;do
 done
 
 if [ $out_of_domain -eq 0 ];then
-       lava-test-case can0_bitrate --result pass --measurement $b --units bit/s
+       lava-test-case can0_bitrate_range_end --result fail --measurement $b --units bit/s
        echo "All bitrates in this interval belong to the domain"
        canconfig can0 stop
        canconfig can1 stop