Subsystem should maintain ``packagegroup-agl-appfw-[subsystem].bb`` which
should hold sufficient packages for application framework of AGL Distro.
-Subsystems also can maintain thier own packagegroups under appropriate
+Subsystems also can maintain their own packagegroups under appropriate
``recipes-*/``.
For example, Qt5 has 2 packagegroups in ``meta-agl-demo``,
-``packagegroup-agl-appfw-native-qt5`` and ``pacakgegroup-agl-demo-qt-examples``
+``packagegroup-agl-appfw-native-qt5`` and ``packagegroup-agl-demo-qt-examples``
which are under ``recipes-qt/``.
The ``packagegroup-agl-appfw-native-qt5`` is included by
-``pacakgegroup-agl-appfw-native`` because Qt5 belongs to native application
+``packagegroup-agl-appfw-native`` because Qt5 belongs to native application
framework of AGL Distro.
-The ``pacakgegroup-agl-demo-qt-examples`` is added to local.conf if needed
+The ``packagegroup-agl-demo-qt-examples`` is added to local.conf if needed
because they are not mandatory for AGL application framework and AGL Demo
Platform.
2. Build the full image of AGL Demo Platform and applications
$ bitbake agl-demo-platform
+ 2a. Specifically If you are building the CES2016 demos you will want to add the following to your "conf/local.conf" file to install the demo code in the image:
+IMAGE_INSTALL_append = " CES2016-demo"
+
+ 2b. If you want to run QEMU directly as VM in Virtual Box or your other favorite VM software then add this line to your "conf/local.conf" file.
+IMAGE_FSTYPES += "vmdk"
+
+ 2c. The Weston IVI-Shell always gets built ; it will not be started, however, unless you specify the following in your "conf/local.conf" file :
+
+IMAGE_INSTALL_append = " \
+ weston-ivi-shell-config \
+ "
+ or you manually overwrite the "/etc/xdg/weston/weston.ini" file with a correct one.
+
3. Run the emulator. The path for the emulator (runqemu) was added during the envsetup.
$ cd tmp/deploy/images/qemex86-64
$ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3
$ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3 \
bootparams="uvesafb.mode_option=1280x720-32"
-5. Some weston samples are available from weston terminal.
+ To extend the amount of memory, add to runqemu:
+ qemuparams="-m 512"
+
+ or use the virtual disk in Virtual Box from this location:
+ tmp/deploy/images/qemux86-64/agl-demo-platform-qemux86-64.vmdk
+
+4. Some weston samples are available from weston terminal.
+
+
+
Build a R-Car M2 (porter) image
-------------------------------