-meta-agl, the Yocto layer for Automotive Grade Linux Distribution\r
-=================================================================\r
-\r
-This layer's purpose is ... [TBD]\r
-\r
-Layer Dependencies\r
-------------------\r
-\r
-URI: git://git.yoctoproject.org/poky\r
-> branch: dizzy\r
-> revision: 5f0d25152bac2d3798663a4ebfdd2df24060f153\r
-\r
-URI: git://git.openembedded.org/meta-openembedded\r
-> layer: meta-oe\r
-> branch: dizzy\r
-> revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97\r
-\r
-Layers\r
-------\r
-\r
-There are 2 sub-layers in top-level `meta-agl`.\r
-\r
-`meta-agl` is a layer which contains AGL common and middleware packages.\r
-> meta-agl/meta-agl\r
- \r
-`meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU).\r
-> meta-agl/meta-agl-bsp\r
-\r
-Packagegroups\r
--------------\r
-\r
-AGL package group design:\r
-\r
-These are the top-level packagegroups for AGL Distribution.\r
-> packagegroup-agl-core (basic/common packages out of oe-core)\r
-> packagegroup-agl-ivi (middlewares for AGL IVI)\r
-\r
-Each package group can contain sub-package groups like these.\r
-> packagegroup-agl-core-multimedia\r
-> packagegroup-agl-core-connectivity\r
-> ...\r
-> packagegroup-agl-ivi-multimedia\r
-> packagegroup-agl-ivi-connectivity\r
-> ...\r
-\r
-The recipe for `packagegroup-agl-core-*.bb` will contain common packages between meta-agl, meta-ivi and meta-tizen.\r
-> directory: meta-agl/meta-agl/recipes-core/packagegroups\r
-> recipes : packagegroup-agl-core-[subsystem].bb\r
-\r
-The "packagegroups-agl-ivi-*" will contain AGL specific middleware packages.\r
-> directory: meta-agl/meta-agl/recipes-ivi/packagegroups\r
-> recipes : packagegroup-agl-ivi-[subsystem].bb\r
-\r
-Supported Machine\r
------------------\r
-\r
-* QEMU (x86-64) - emulated machine: qemux86-64\r
-\r
-Supported Target of bitbake\r
-------------------------\r
-\r
-* `agl-image-ivi` The baseline image of AGL Distributions\r
-\r
-* `agl-image-minimal` For internal use to develop distribution (experimental)\r
-* `agl-image-weston` For internal use to develop distribution (experimental)\r
-\r
-Build a QEMU image\r
-------------------\r
-\r
-You can build a QEMU image using the following steps:\r
-\r
-1. Export TEMPLATECONF to pick up correct configuration for the build\r
- > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf\r
-\r
-2. Rune the following command:\r
- > $ source poky/oe-init-build-env\r
-\r
-3. Build the minimal image of AGL Distribution\r
- > $ bitbake agl-image-ivi\r
-\r
-4. Run the emulator\r
- > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64\r
-\r
- For large screen:\r
- > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode=1280x720-32"\r
-\r
-5. Some weston samples are available from weston terminal.\r
+meta-agl, the Yocto layer for Automotive Grade Linux Distribution
+=================================================================
+
+This layer's purpose is ... [TBD]
+
+Layer Dependencies
+------------------
+
+URI: git://git.yoctoproject.org/poky
+> branch: dizzy
+> revision: 5f0d25152bac2d3798663a4ebfdd2df24060f153
+
+URI: git://git.openembedded.org/meta-openembedded
+> layer: meta-oe
+> branch: dizzy
+> revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
+
+## The Renesas R-Car Gen2 (Porter) board depends in addition on: ##
+
+URI: https://gerrit.automotivelinux.org/gerrit/p/AGL/meta-renesas.git
+> branch: agl-1.0-bsp-1.8.0
+> revision: 0a69b07cfca17d1435f2bc7bf779139c5fac09a3
+
+Layers
+------
+
+There are 2 sub-layers in top-level `meta-agl`.
+
+`meta-agl` is a layer which contains AGL common and middleware packages.
+> meta-agl/meta-agl
+
+`meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU).
+> meta-agl/meta-agl-bsp
+
+Packagegroups
+-------------
+
+AGL package group design:
+
+These are the top-level packagegroups for AGL Distribution.
+> packagegroup-agl-core (basic/common packages out of oe-core)
+> packagegroup-agl-ivi (middlewares for AGL IVI)
+
+Each package group can contain sub-package groups like these.
+> packagegroup-agl-core-multimedia
+> packagegroup-agl-core-connectivity
+> ...
+> packagegroup-agl-ivi-multimedia
+> packagegroup-agl-ivi-connectivity
+> ...
+
+The recipe for `packagegroup-agl-core-*.bb` will contain common packages between meta-agl, meta-ivi and meta-tizen.
+> directory: meta-agl/meta-agl/recipes-core/packagegroups
+> recipes : packagegroup-agl-core-[subsystem].bb
+
+The "packagegroups-agl-ivi-*" will contain AGL specific middleware packages.
+> directory: meta-agl/meta-agl/recipes-ivi/packagegroups
+> recipes : packagegroup-agl-ivi-[subsystem].bb
+
+Supported Machine
+-----------------
+
+* QEMU (x86-64) - emulated machine: qemux86-64
+* Renesas R-Car Gen2 (R-Car M2) - machine: porter
+
+Supported Target of bitbake
+------------------------
+
+* `agl-image-ivi` The baseline image of AGL Distributions
+
+* `agl-image-minimal` For internal use to develop distribution (experimental)
+* `agl-image-weston` For internal use to develop distribution (experimental)
+
+Supposed Directory Trees of Layers to build
+-------------------------------------------
+
+* For QEMU
+
+ ${TOPDIR}/
+ meta-agl/
+ meta-openembedded/
+ poky/
+
+* For R-Car M2
+
+ ${TOPDIR}/
+ meta-agl/
+ meta-openembedded/
+ meta-renesas/
+ poky/
+
+Build a QEMU image
+------------------
+
+You can build a QEMU image using the following steps:
+
+1. Export TEMPLATECONF to pick up correct configuration for the build
+ > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf
+
+2. Run the following command:
+ > $ source poky/oe-init-build-env
+
+3. Build the minimal image of AGL Distribution
+ > $ bitbake agl-image-ivi
+
+4. Run the emulator
+ > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64
+
+ For large screen:
+ > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode_option=1280x720-32"
+
+5. Some weston samples are available from weston terminal.
+
+Build a R-Car M2 (porter) image
+-------------------------------
+
+### Software setup
+
+#### Obtain and Install Renesas Graphics Drivers
+
+See [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#M2_Porter_low_cost_board) and get 2 ZIP files from the link there.
+
+Note: You have to copy files manually because there is no shell-script
+in the current meta-renesas.
+
+1. Unzip the two downloads into a folder. In this example a temporary directory is used.
+ $ cd $HOME/AGL
+ $ mkdir binary-tmp
+ $ <unzip the two downloads into binary-tmp>
+
+ After this step there should be two files in binary-tmp:
+ R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
+ R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
+
+2. Extract 2 tar.gz
+ tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
+ tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
+
+3. Copy 2 files manually
+ 1. Locate EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 in the graphics
+ driver deliverable and copy it into the BSP layer. (need rename)
+ cp <path_to_file>/EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \
+ meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\
+ gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2
+
+ 2. Locate SGX_KM_M2.tar.bz2 in the graphics driver deliverable and copy
+ it into the BSP layer.
+ cp <path_to_file>SGX_KM_M2.tar.bz2 \
+ meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module
+
+#### Build from the Source code
+
+You can build a R-Car2 M2 (porter) image using the following steps:
+
+1. Export TEMPLATECONF to pick up correct configuration for the build
+ > $ export TEMPLATECONF=/full/path/to/meta-renesas/meta-rcar-gen2/conf
+
+2. Run the following command:
+ > $ source poky/oe-init-build-env
+
+3. Build the minimal image of AGL Distribution
+ > $ bitbake agl-image-ivi
+
+### Deployment (SDCARD)
+
+Follow the instructions [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29)
+
+Note: Use `agl-image-ivi-porter.tar.bz2` as name of root file system archive.
Code Review / AGL / meta-agl.git / blobdiff