+++ /dev/null
-meta-agl, the Yocto layer for Automotive Grade Linux Distribution
-=================================================================
-
-This layer's purpose is ... [TBD]
-
-Layer Dependencies
-------------------
-
-URI: git://git.yoctoproject.org/poky
-> branch: dizzy
-> revision: 5f0d25152bac2d3798663a4ebfdd2df24060f153
-
-URI: git://git.openembedded.org/meta-openembedded
-> layer: meta-oe
-> branch: dizzy
-> revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
-
-## The Renesas R-Car Gen2 (Porter) board depends in addition on: ##
-
-URI: https://gerrit.automotivelinux.org/gerrit/p/AGL/meta-renesas.git
-> branch: agl-1.0-bsp-1.8.0
-> revision: 0a69b07cfca17d1435f2bc7bf779139c5fac09a3
-
-Layers
-------
-
-There are 2 sub-layers in top-level `meta-agl`.
-
-`meta-agl` is a layer which contains AGL common and middleware packages.
-> meta-agl/meta-agl
-
-`meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU).
-> meta-agl/meta-agl-bsp
-
-Packagegroups
--------------
-
-AGL package group design:
-
-These are the top-level packagegroups for AGL Distribution.
-> packagegroup-agl-core (basic/common packages out of oe-core)
-> packagegroup-agl-ivi (middlewares for AGL IVI)
-
-Each package group can contain sub-package groups like these.
-> packagegroup-agl-core-multimedia
-> packagegroup-agl-core-connectivity
-> ...
-> packagegroup-agl-ivi-multimedia
-> packagegroup-agl-ivi-connectivity
-> ...
-
-The recipe for `packagegroup-agl-core-*.bb` will contain common packages between meta-agl, meta-ivi and meta-tizen.
-> directory: meta-agl/meta-agl/recipes-core/packagegroups
-> recipes : packagegroup-agl-core-[subsystem].bb
-
-The "packagegroups-agl-ivi-*" will contain AGL specific middleware packages.
-> directory: meta-agl/meta-agl/recipes-ivi/packagegroups
-> recipes : packagegroup-agl-ivi-[subsystem].bb
-
-Supported Machine
------------------
-
-* QEMU (x86-64) - emulated machine: qemux86-64
-* Renesas R-Car Gen2 (R-Car M2) - machine: porter
-
-Supported Target of bitbake
-------------------------
-
-* `agl-image-ivi` The baseline image of AGL Distributions
-
-* `agl-image-minimal` For internal use to develop distribution (experimental)
-* `agl-image-weston` For internal use to develop distribution (experimental)
-
-Supposed Directory Trees of Layers to build
--------------------------------------------
-
-* For QEMU
-
- ${TOPDIR}/
- meta-agl/
- meta-openembedded/
- poky/
-
-* For R-Car M2
-
- ${TOPDIR}/
- meta-agl/
- meta-openembedded/
- meta-renesas/
- poky/
-
-Build a QEMU image
-------------------
-
-You can build a QEMU image using the following steps:
-
-1. Export TEMPLATECONF to pick up correct configuration for the build
- > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf
-
-2. Run the following command:
- > $ source poky/oe-init-build-env
-
-3. Build the minimal image of AGL Distribution
- > $ bitbake agl-image-ivi
-
-4. Run the emulator
- > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64
-
- For large screen:
- > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode_option=1280x720-32"
-
-5. Some weston samples are available from weston terminal.
-
-Build a R-Car M2 (porter) image
--------------------------------
-
-### Software setup
-
-#### Obtain and Install Renesas Graphics Drivers
-
-See [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#M2_Porter_low_cost_board) and get 2 ZIP files from the link there.
-
-Note: You have to copy files manually because there is no shell-script
-in the current meta-renesas.
-
-1. Unzip the two downloads into a folder. In this example a temporary directory is used.
- $ cd $HOME/AGL
- $ mkdir binary-tmp
- $ <unzip the two downloads into binary-tmp>
-
- After this step there should be two files in binary-tmp:
- R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
- R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
-
-2. Extract 2 tar.gz
- tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
- tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
-
-3. Copy 2 files manually
- 1. Locate EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 in the graphics
- driver deliverable and copy it into the BSP layer. (need rename)
- cp <path_to_file>/EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \
- meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\
- gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2
-
- 2. Locate SGX_KM_M2.tar.bz2 in the graphics driver deliverable and copy
- it into the BSP layer.
- cp <path_to_file>SGX_KM_M2.tar.bz2 \
- meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module
-
-#### Build from the Source code
-
-You can build a R-Car2 M2 (porter) image using the following steps:
-
-1. Export TEMPLATECONF to pick up correct configuration for the build
- > $ export TEMPLATECONF=/full/path/to/meta-renesas/meta-rcar-gen2/conf
-
-2. Run the following command:
- > $ source poky/oe-init-build-env
-
-3. Build the minimal image of AGL Distribution
- > $ bitbake agl-image-ivi
-
-### Deployment (SDCARD)
-
-Follow the instructions [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29)
-
-Note: Use `agl-image-ivi-porter.tar.bz2` as name of root file system archive.
Code Review / AGL / meta-agl.git / blobdiff