URI: git://git.yoctoproject.org/poky
> branch: dizzy
-> revision: 5f0d25152bac2d3798663a4ebfdd2df24060f153
+> revision: df87cb27efeaea1455f20692f9f1397c6fcab254
URI: git://git.openembedded.org/meta-openembedded
> layer: meta-oe
> branch: dizzy
-> revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
+> revision: 9efaed99125b1c4324663d9a1b2d3319c74e7278
URI: https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl
> branch: master
> revision: 4d71b6fbe454ff51342ab1eb6791fad66ba98c3e
> (or later)
+URI: https://github.com/meta-qt5/meta-qt5.git
+> branch: dizzy
+> revision: adeca0db212d61a933d7952ad44ea1064cfca747
+
## The Renesas R-Car Gen2 (Porter) board depends in addition on: ##
URI: https://gerrit.automotivelinux.org/gerrit/AGL/meta-renesas
AGL Demo Platform's package group design:
-Top-level packagegroup,
-> packagegroup-agl-appfw (all packages for demo platform)
+* packagegroup-agl-demo-platform
+
+This is for making image 'agl-demo-platform' which is full image
+for IVI profile of AGL distro.
+
+As meta-agl's design of packagegroups, ``agl-demo-platform.bb`` contains
+only ``packagegroup-agl-demo-platform`` and packages of DEMO apps.
+
+``packagegroup-agl-demo-platform`` has 4 packagegroups in it,
+``packagegroup-agl-core``, ``packagegroup-agl-ivi``,
+``packagegroup-agl-ivi-common-core``, and ``packagegroup-agl-appfw``.
+
+* packagegroup-agl-appfw*
-This package group can contain sub-package groups like these.
-> packagegroup-agl-appfw-graphics (for graphics subsystem)
-> packagegroup-agl-appfw-agl (for AGL App Fw subystem)
-> ...
+These packagegroups contains packages for application framework of AGL Distro.
+Subsystem should maintain ``packagegroup-agl-appfw-[subsystem].bb`` which
+should hold sufficient packages for application framework of AGL Distro.
-The "packagegroups-agl-appfw-*" will contain packages for application and
-frameworks.
-> directory: meta-agl-demo/recipes-demo-platform/packagegroups
-> recipes : packagegroup-agl-appfw-[subsystem].bb
+Subsystems also can maintain thier own packagegroups under appropriate
+``recipes-*/``.
+
+For example, Qt5 has 2 packagegroups in ``meta-agl-demo``,
+``packagegroup-agl-appfw-native-qt5`` and ``pacakgegroup-agl-demo-qt-examples``
+which are under ``recipes-qt/``.
+
+The ``packagegroup-agl-appfw-native-qt5`` is included by
+``pacakgegroup-agl-appfw-native`` because Qt5 belongs to native application
+framework of AGL Distro.
+
+The ``pacakgegroup-agl-demo-qt-examples`` is added to local.conf if needed
+because they are not mandatory for AGL application framework and AGL Demo
+Platform.
Supported Machine
-----------------
meta-agl/
meta-agl-demo/
meta-openembedded/
+ meta-qt5/
poky/
* For R-Car M2
meta-agl/
meta-agl-demo/
meta-openembedded/
+ meta-qt5/
meta-renesas/
poky/
+Downloading the Source
+--------------------
+You can use repo tool to get all layers which are needed to build AGL Distribution.
+
+1. Installing Repo. Make sure you have a bin/ in your $HOME and it's included in your $PATH.
+ $ mkdir ~/bin
+ $ export PATH=~/bin:$PATH
+
+ Download the repo tool.
+ $ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
+ $ chmod a+x ~/bin/repo
+
+2. Preparing download. Create an empty directory to hold all recipes and build environment. You can make it as any name you like.
+ $ mkdir WORKING-DIRECTORY
+ $ cd WORKING-DIRECTORY
+
+3. Getting all layers.
+ $ repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo
+ $ repo sync
+
Build a QEMU image
------------------
You can build a QEMU image using the following steps:
-1. Export TEMPLATECONF to pick up correct configuration for the build
- $ export TEMPLATECONF=/full/path/to/meta-agl-demo/conf
-
-2. Run the following command:
- $ source poky/oe-init-build-env
+1. Set up environment: You can specify any name for directory which storing all stuffs to build.
+ $ source meta-agl/scripts/envsetup.sh qemux86-64 [BUILD_DIR]
-3. Build the full image of AGL Demo Platform and applications
+2. Build the full image of AGL Demo Platform and applications
$ bitbake agl-demo-platform
-4. Run the emulator
- $ cd $BUILD_DIR/tmp/deploy/images/qemex86-64
- $ PATH_TO_POKY/poky/scripts/runqemu qemux86-64 bzImage-qemux86-64.bin \
- agl-demo-platform-qemux86-64.ext3
+3. Run the emulator. The path for the emulator (runqemu) was added during the envsetup.
+ $ cd tmp/deploy/images/qemex86-64
+ $ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3
For large screen:
- $ PATH_TO_POKY/poky/scripts/runqemu qemux86-64 bzImage-qemux86-64.bin \
- agl-demo-platform-qemux86-64.ext3 \
+ $ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3 \
bootparams="uvesafb.mode_option=1280x720-32"
5. Some weston samples are available from weston terminal.
Build a R-Car M2 (porter) image
-------------------------------
-### Software setup
-
-NOTE: These instructions are based on GENIVI wiki, [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter). If these didn't work correctly especially around Renesas Binary Packages, please check there and updated instructions.
-
-#### Getting Source Code and Build image
-
-1. Create a directory for working, then go to there.
- $ mkdir -p $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE
- $ cd $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE
- $ export AGL_TOP=`pwd`
-
-2. Get the meta data and checkout
- $ git clone git://git.yoctoproject.org/poky
- $ cd poky
- $ git checkout 5f0d25152bac2d3798663a4ebfdd2df24060f153
- $ cd -
- $ git clone git://git.openembedded.org/meta-openembedded
- $ cd meta-openembedded
- $ git checkout 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
- $ cd -
- $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl
- $ cd meta-agl
- $ git checkout 4d71b6fbe454ff51342ab1eb6791fad66ba98c3e
- $ cd -
- $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-renesas
- $ cd meta-renesas
- $ git checkout bf30de66badcac7ef82d3758aa44c116ee791a28
- $ cd -
- $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl
-
#### Obtain and Install Renesas Graphics/Multimedia Drivers
1. Download packages from Renesas
* Related Linux drivers
> r-car_series_evaluation_software_package_of_linux_drivers-*.zip
-2. Unzip the two downloads into a temporary directory.
- $ cd $AGL_TOP
- $ mkdir binary-tmp
- $ cd binary-tmp
- $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_for_linux-*.zip
- $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_of_linux_drivers-*.zip
-
- After this step there should be two files in binary-tmp:
- * Multimedia and Graphics library
- > R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
- * Related Linux drivers
- > R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
-
-3. Copy the graphics acceleration drivers by shell script.
- $ cd $AGL_TOP/meta-renesas/meta-rcar-gen2
- $ ./copy_gfx_software_porter.sh ../../binary-tmp
-
-4. Copy the multimedia acceleration drivers by shell script.
- $ cd $AGL_TOP/meta-renesas/meta-rcar-gen2
- $ ./copy_mm_software_lcb.sh ../../binary-tmp
+ These 2 files from Renesas should be store in your download directory in $HOME. (e.g. $HOME/Downloads) If not, envsetup.sh in below will stop and show some instruction, then please follow it.
#### Build from the Source code
You can build a R-Car2 M2 (porter) image using the following steps:
-1. Export TEMPLATECONF to pick up correct configuration for the build
- $ export TEMPLATECONF=$AGL_TOP/meta-renesas/meta-rcar-gen2/conf
+1. Set up environment: You can specify any name for directory which storing all stuffs to build.
+ $ source meta-agl/scripts/envsetup.sh porter [BUILD_DIR]
+
+2. (Optional) If you want to install various Qt5 examples, add below
+ configuration to your local.conf.
+ IMAGE_INSTALL_append = " \
+ packagegroup-agl-demo-qt-examples \
+ "
+ PACKAGECONFIG_append_pn-qtbase = " examples"
+
+ IMPORTANT NOTE:
+ To run examples with wayland-egl plugin,
+ use ``LD_PRELOAD=/usr/lib/libEGL.so <command>``.
+ If not, programs should not launch by error,
+ 'EGL not available'.
-2. (Optional) If you want to use multimedia accelerations, uncomment
+3. (Optional) If you want to use multimedia accelerations, uncomment
manually 4 `IMAGE_INSTALL_append_porter` in conf/local.conf.
#IMAGE_INSTALL_append_porter = " \
# gstreamer1.0-plugins-bad-waylandsink \
The version of GStreamer1.0 which AGL distro use, will be changed
to 1.2.3 (meta-renesas prefers) from 1.4.1(meta-agl default) by this switch.
-3. Run the following command:
- $ cd $AGL_TOP
- $ source poky/oe-init-build-env
-
- (Optional) If you want to use multimedia accelerations, confirm your
- conf/bblayer.conf has a entry of `meta-openembedded/meta-multimedia`
- in BBLAYERS because packagegroup-rcar-gen2-multimedia needs some extra
- packages there.
-
4. Build the full image of AGL Demo Platform and applications
$ bitbake agl-demo-platform
$ sudo tar --extract --numeric-owner --preserve-permissions --preserve-order \
--totals --directory=/media/$SDCARD_LABEL --file=agl-demo-platform-porter.tar.bz2
3. Copy kernel and DTB into the `/boot` of the SD-Card
- $ sudo cp uImage uImage-r8a7791-porter.dtb /media/$SDCARD_LABEL
+ $ sudo cp uImage uImage-r8a7791-porter.dtb /media/$SDCARD_LABEL/boot
4. After the copy finished, unmount SD-Card and insert it into the SD-Card slot of the porter board.
Code Review / AGL / meta-agl-demo.git / blobdiff