branch: dunfell
URI: https://github.com/renesas-rcar/meta-renesas
- branch: dunfell-dev-4.14
+ branch: dunfell-dev
+ - Note that the dunfell-Yocto-v4.7.0 tag is currently the latest revision
+ verified as compatible, it is recommended that it be used.
Build Instructions
You should follow the instructions in the "Building for Supported Renesas Boards"
section on the AGL developer site to build images for the reference hardware.
-Use the "h3ulcb" machine when configuring, e.g.:
+Use the "h3ulcb" machine and "agl-refhw-h3" feature when configuring, e.g.:
$ cd $AGL_TOP
- $ source meta-agl/scripts/aglsetup.sh -m h3uclb -b build \
- agl-devel agl-demo agl-localdev
-
-This works as the AGL reference hardware support has been integrated with the
-"h3ulcb" (and "h3ulcb-nogfx") machine templates in the AGL UCB tree. In the
-resulting build, the image can be used on the reference hardware by using the
-DTB file "r8a7795-agl-refhw.dtb". In the reference hardware u-boot settings,
+ $ source meta-agl/scripts/aglsetup.sh -m h3ulcb -b build \
+ agl-refhw-h3 agl-demo agl-devel
+
+This works as the AGL reference hardware support activated by the "agl-refhw-h3"
+feature integrates on top of the "h3ulcb" (or "h3ulcb-nogfx") machine support in
+the AGL UCB tree. Note that it has not been tested with the "h3ulcb-kf" machine.
+In the resulting build, the image can be used on the reference hardware by using
+the DTB file "r8a7795-agl-refhw.dtb". In the reference hardware u-boot settings,
this can be done with the following (in case of booting from the Micro SD card
in SD#0):
IV. Notes
=========
1. SD#1 is not supported.
-2. There are suspicious HDMI0/1 interrupts detected and disabled forcibly by
- the kernel during boot. The reason is under investigation.