+ diagnostic_manager_t& dm = configuration_t::instance().get_diagnostic_manager();
+ DiagnosticRequest* request = (DiagnosticRequest*)userdata;
+ active_diagnostic_request_t* adr = dm.find_recurring_request(request);
+
+ dm.cleanup_active_requests(false);
+ if(adr != nullptr && adr->get_can_bus_dev() == dm.get_can_bus_dev() && adr->should_send() &&
+ dm.clear_to_send(adr))
+ {
+ adr->get_frequency_clock().tick();
+ start_diagnostic_request(&dm.shims_, adr->get_handle());
+ if(adr->get_handle()->completed && !adr->get_handle()->success)
+ {
+ ERROR(binder_interface, "send_request: Fatal error sending diagnostic request");
+ sd_event_source_unref(s);
+ return -1;
+ }
+
+ adr->get_timeout_clock().tick();
+ adr->set_in_flight(true);
+ }
+
+ if(adr != nullptr && adr->get_recurring())
+ {
+ return dm.reschedule_request(s, usec, adr);
+ }
+
+ sd_event_source_unref(s);
+ NOTICE(binder_interface, "send_request: Request doesn't exist anymore. Canceling.'");
+ return -2;
+}
+
+/// @brief Will decode the diagnostic response and build the final openxc_VehicleMessage to return.
+///
+/// @param[in] adr - A pointer to an active diagnostic request holding a valid diagnostic handle
+/// @param[in] response - The response to decode from which the Vehicle message will be built and returned
+///
+/// @return A filled openxc_VehicleMessage or a zeroed struct if there is an error.
+openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_response(active_diagnostic_request_t* adr, const DiagnosticResponse& response)
+{
+ openxc_VehicleMessage message = build_VehicleMessage();
+ float value = (float)diagnostic_payload_to_integer(&response);
+ if(adr->get_decoder() != nullptr)
+ {
+ value = adr->get_decoder()(&response, value);
+ }
+
+ if((response.success && strnlen(adr->get_name().c_str(), adr->get_name().size())) > 0)
+ {
+ // If name, include 'value' instead of payload, and leave of response
+ // details.
+ message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField(value)));
+ }
+ else
+ {
+ // If no name, send full details of response but still include 'value'
+ // instead of 'payload' if they provided a decoder. The one case you
+ // can't get is the full detailed response with 'value'. We could add
+ // another parameter for that but it's onerous to carry that around.
+ message = build_VehicleMessage(adr, response, value);
+ }
+
+ // If not success but completed then the pid isn't supported
+ if(!response.success)
+ {
+ std::vector<diagnostic_message_t*> found_signals;
+ configuration_t::instance().find_diagnostic_messages( build_DynamicField(adr->get_name()), found_signals );
+ found_signals.front()->set_supported(false);
+ cleanup_request(adr, true);
+ NOTICE(binder_interface, "relay_diagnostic_response: PID not supported or ill formed. Please unsubscribe from it. Error code : %d", response.negative_response_code);
+ message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField("This PID isn't supported by your vehicle.")));
+ }
+
+ if(adr->get_callback() != nullptr)
+ {
+ adr->get_callback()(adr, &response, value);
+ }
+
+ return message;
+}
+
+/// @brief Will take the CAN message and pass it to the receive functions that will process
+/// diagnostic handle for each active diagnostic request then depending on the result we will
+/// return pass the diagnostic response to decode it.
+///
+/// @param[in] entry - A pointer to an active diagnostic request holding a valid diagnostic handle
+/// @param[in] cm - A raw CAN message.
+///
+/// @return A pointer to a filled openxc_VehicleMessage or a nullptr if nothing has been found.
+openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_handle(active_diagnostic_request_t* entry, const can_message_t& cm)
+{
+ DiagnosticResponse response = diagnostic_receive_can_frame(&shims_, entry->get_handle(), cm.get_id(), cm.get_data(), cm.get_length());
+ if(response.completed && entry->get_handle()->completed)
+ {
+ if(entry->get_handle()->success)
+ return relay_diagnostic_response(entry, response);
+ }
+ else if(!response.completed && response.multi_frame)
+ {
+ // Reset the timeout clock while completing the multi-frame receive
+ entry->get_timeout_clock().tick();
+ }
+
+ return build_VehicleMessage();
+}
+
+/// @brief Find the active diagnostic request with the correct DiagnosticRequestHandle
+/// member that will understand the CAN message using diagnostic_receive_can_frame function
+/// from UDS-C library. Then decode it with an ad-hoc method.
+///
+/// @param[in] cm - Raw CAN message received
+///
+/// @return VehicleMessage with decoded value.
+openxc_VehicleMessage diagnostic_manager_t::find_and_decode_adr(const can_message_t& cm)
+{
+ openxc_VehicleMessage vehicle_message = build_VehicleMessage();
+
+ for ( auto entry : non_recurring_requests_)
+ {
+ vehicle_message = relay_diagnostic_handle(entry, cm);
+ if (is_valid(vehicle_message))
+ return vehicle_message;
+ }
+
+ for ( auto entry : recurring_requests_)
+ {
+ vehicle_message = relay_diagnostic_handle(entry, cm);
+ if (is_valid(vehicle_message))
+ return vehicle_message;
+ }
+
+ return vehicle_message;
+}
+
+/// @brief Tell if the CAN message received is a diagnostic response.
+/// Request broadcast ID use 0x7DF and assigned ID goes from 0x7E0 to Ox7E7. That allows up to 8 ECU to respond
+/// at the same time. The response is the assigned ID + 0x8, so response ID can goes from 0x7E8 to 0x7EF.
+///
+/// @param[in] cm - CAN message received from the socket.
+///
+/// @return True if the active diagnostic request match the response.
+bool diagnostic_manager_t::is_diagnostic_response(const can_message_t& cm)
+{
+ if (cm.get_id() >= 0x7e8 && cm.get_id() <= 0x7ef)
+ return true;
+ return false;
+}