+```text
+[snip]
+--- fragment /home/working/workspace_agl_master/meta-agl/templates/machine/h3ulcb/50_setup.sh
+/home/working/workspace_agl_master /home/working/workspace_agl_master/build_gen3
+The graphics and multimedia acceleration packages for
+the R-Car Gen3 board can be downloaded from:
+https://www.renesas.com/en-us/solutions/automotive/rcar-demoboard-2.html
+
+These 2 files from there should be store in your'/home/devel/Downloads' directory.
+ R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston8-20200923.zip
+ R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-weston8-20200923.zip
+/home/working/workspace_agl_master/build_gen3
+--- fragment /home/working/workspace_agl_master/meta-agl/templates/base/99_setup_EULAconf.sh
+--- end of setup script
+OK
+Generating setup file: /home/working/workspace_agl_master/build_gen3/agl-init-build-env ... OK
+------------ aglsetup.sh: Done
+[snip]
+```
+
+If you encounter this issue, or any other unwanted behavior, you can fix the error
+mentioned, remove the `$AGL_TOP/build` directory, and then re-launch the
+`aglsetup.sh` again.
+
+Here is another example that indicates the driver files could not be extracted from the downloads directory:
+
+```text
+~/workspace_agl/build/conf $ cat setup.log
+--- beginning of setup script
+--- fragment /home/working/workspace_agl/meta-agl/templates/base/01_setup_EULAfunc.sh
+--- fragment /home/working/workspace_agl/meta-agl/templates/machine/h3ulcb/50_setup.sh
+~/workspace_agl ~/workspace_agl/build
+ERROR: FILES "+/home/working/Downloads/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston8-20200923.zip+" NOT EXTRACTING CORRECTLY
+ERROR: FILES "+/home/working/Downloads/R-car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-weston8-20200923.zip+" NOT EXTRACTING CORRECTLY
+The graphics and multimedia acceleration packages for
+the R-Car Gen3 board BSP can be downloaded from:
+<https://www.renesas.com/us/en/application/automotive/r-car-h3-m3-documents-software>
+
+These 2 files from there should be stored in your
+'/home/working/Downloads' directory.
+ R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston8-20200923.zip
+ R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-weston8-20200923.zip
+ERROR: Script /home/working/workspace_agl/build/conf/setup.sh failed
+[snip]
+```
+
+### 4.3. Updating the Board's Firmware
+
+Follow these steps to update the firmware:
+
+1. **Update the Sample Loader and MiniMonitor:**
+
+ You only need to make these updates one time per device.
+
+ Follow the procedure found on the
+ eLinux.org wiki to update to at least version 3.02,
+ which is mandatory to run the AGL image
+ ([R-car loader update](https://elinux.org/R-Car/Boards/Kingfisher#How_to_update_of_Sample_Loader_and_MiniMonitor)).
+
+2. **Update the Firmware Stack:**
+
+ You only need to update the firmware stack if you are
+ using the Eel or later (5.0) version of AGL software.
+
+ M3 and H3 Renesas board are AArch64 platforms.
+ As such, they have a firmware stack that is divided across: **ARM Trusted Firmware**, **OP-Tee** and **U-Boot**.
+
+ If you are using the Eel (5.0) version or later of the AGL software, you must update
+ the firmware using the **[h3ulcb] [R-car h3ulcb firmware update](http://elinux.org/R-Car/Boards/H3SK#Flashing_firmware)**
+ or **[m3ulcb] [R-car m3ulcb firmware update](https://elinux.org/R-Car/Boards/M3SK#Flashing_firmware)** links from the
+ [Embedded Linux Wiki](https://www.elinux.org/Main_Page) (i.e. `elinux.org`).
+
+ The table in the wiki lists the files you need to flash the firmware.
+ You can find these files in the following directory:
+
+ ```sh
+ $AGL_TOP/build/tmp/deploy/images/$MACHINE
+ ```
+
+ **NOTE:** The Salvator-X firmware update process is not documented on eLinux.
+ **NOTE:** The AGL Reference Hardware board generally should not require a
+ firmware update to be usable, and has a slightly different update procedure.
+ If you do need to update the firmware, the procedure is documented
+ [here](https://git.automotivelinux.org/AGL/meta-agl-refhw/tree/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md).
+
+### 4.4. Logging Into the Console
+
+Once the board boots, you should see the
+[Wayland display](https://en.wikipedia.org/wiki/Wayland_(display_server_protocol))
+on the external monitor.
+A login prompt should appear as follows depending on your board:
+
+**h3ulcb** or **AGL Reference Hardware**:
+
+```text
+Automotive Grade Linux ${AGL_VERSION} h3ulcb ttySC0
+
+h3ulcb login: root