Updating File name and links in the documentation

[AGL/documentation.git] / docs / 01_Getting_Started / 02_Building_AGL_Image / 09_Building_for_Supported_Renesas_Boards.md

diff --git a/docs/1_Getting_Started/2_Building_AGL_Image/9_RCar_Gen_3.md b/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md
similarity index 98%
rename from docs/1_Getting_Started/2_Building_AGL_Image/9_RCar_Gen_3.md
rename to docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md
index 33fc50a..8622194 100644 (file)
--- a/docs/1_Getting_Started/2_Building_AGL_Image/9_RCar_Gen_3.md
+++ b/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md
@@ -145,7 +145,7 @@ Internet.
 ### 1.4. Making Sure Your Build Environment is Correct
 
 The
 ### 1.4. Making Sure Your Build Environment is Correct
 
 The

-"[Initializing Your Build Environment](./3_Initializing_Your_Build_Environment.md)"
+"[Initializing Your Build Environment](./04_Initializing_Your_Build_Environment.md)"

 section presented generic information for setting up your build environment
 using the `aglsetup.sh` script.
 If you are building an image for a supported Renesas board,
 section presented generic information for setting up your build environment
 using the `aglsetup.sh` script.
 If you are building an image for a supported Renesas board,


@@ -233,7 +233,7 @@ Finally, the AGL features are provided to support building the AGL Demo image
 for the Renesas board.
 
 You can learn more about the AGL Features in the
 for the Renesas board.
 
 You can learn more about the AGL Features in the

-"[Initializing Your Build Environment](./3_Initializing_Your_Build_Environment.md)"
+"[Initializing Your Build Environment](./04_Initializing_Your_Build_Environment.md)"

 section.
 
 ## 2. Using BitBake
 section.
 
 ## 2. Using BitBake


@@ -589,7 +589,7 @@ In general, the defaults along with the configuration fragments the
 `aglsetup.sh` script applies in the `local.conf` file are good enough.
 However, you can customize aspects by editing the `local.conf` file.
 See the
 `aglsetup.sh` script applies in the `local.conf` file are good enough.
 However, you can customize aspects by editing the `local.conf` file.
 See the

-"[Customizing Your Build](4_Customizing_Your_Build.md)"
+"[Customizing Your Build](05_Customizing_Your_Build.md)"

 section for common configurations you might want to consider.
 
 **NOTE:** For detailed explanations of the configurations you can make
 section for common configurations you might want to consider.
 
 **NOTE:** For detailed explanations of the configurations you can make


@@ -623,7 +623,7 @@ MACHINE = "h3-salvator-x"
 ```
 
 If you ran the `aglsetup.sh` script as described in the
 ```
 
 If you ran the `aglsetup.sh` script as described in the

-"[Making Sure Your Build Environment is Correct](./5_3_RCar_Gen_3.md#4-making-sure-your-build-environment-is-correct)"
+"[Making Sure Your Build Environment is Correct](#14-making-sure-your-build-environment-is-correct)"

 section earlier, the "agl-devel", "agl-demo", "agl-netboot", "agl-appfw-smack", and
 "agl-localdev" AGL features will be in effect.
 These features provide the following:
 section earlier, the "agl-devel", "agl-demo", "agl-netboot", "agl-appfw-smack", and
 "agl-localdev" AGL features will be in effect.
 These features provide the following: