-Build a R-Car M2 (porter) image
--------------------------------
-
-### Software setup
-
-NOTE: These instructions are based on GENIVI wiki, [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter). If these didn't work correctly especially around Renesas Binary Packages, please check there and updated instructions.
-
-#### Getting Source Code and Build image
-
-1. Create a directory for working, then go to there.
- $ mkdir -p $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE
- $ cd $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE
- $ export AGL_TOP=`pwd`
-
-2. Get the meta data and checkout
- $ git clone git://git.yoctoproject.org/poky
- $ cd poky
- $ git checkout 5f0d25152bac2d3798663a4ebfdd2df24060f153
- $ cd -
- $ git clone git://git.openembedded.org/meta-openembedded
- $ cd meta-openembedded
- $ git checkout 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
- $ cd -
- $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-renesas
- $ cd meta-renesas
- $ git checkout c28172567a6325f5692e5d33b1ae1c1e64e59ddf
- $ cd -
- $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl
-
-#### Obtain and Install Renesas Graphics Drivers
-
-1. Download packages from Renesas
-
- The graphics and multimedia acceleration packages for the R-Car M2 Porter board
- can be download directory from [here](http://www.renesas.com/secret/r_car_download/rcar_demoboard.jsp).
-
- There are 2 ZIP files can be downloaded.
- * Multimedia and Graphics library which require registeration and click through license
- > r-car_series_evaluation_software_package_for_linux-*.zip
- * Related Linux drivers
- > r-car_series_evaluation_software_package_of_linux_drivers-*.zip
-
-2. Unzip the two downloads into a temporary directory.
- $ cd $AGL_TOP
- $ mkdir binary-tmp
- $ cd binary-tmp
- $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_for_linux-*.zip
- $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_of_linux_drivers-*.zip
-
- After this step there should be two files in binary-tmp:
- * Multimedia and Graphics library
- > R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
- * Related Linux drivers
- > R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
-
-3. Extract 2 tar archives
- $ tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
- $ tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
-
-4. Copy 2 files manually
- 1. Locate `EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2` in the Multimedia and Graphics library deliverable and copy it into the BSP layer.
- $ cd $AGL_TOP
- $ cp <path_to_file>/EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \
- meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\
- gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2
-
- 2. Locate `SGX_KM_M2.tar.bz2` in the related linux drivers deliverable and copy it into the BSP layer.
- $ cp <path_to_file>SGX_KM_M2.tar.bz2 \
- $ meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module
-
-#### Build from the Source code
-
-You can build a R-Car2 M2 (porter) image using the following steps:
-
-1. Export TEMPLATECONF to pick up correct configuration for the build
- $ export TEMPLATECONF=$AGL_TOP/meta-renesas/meta-rcar-gen2/conf
-
-2. Run the following command:
- $ cd $AGL_TOP
- $ source poky/oe-init-build-env
-
-3. Build the minimal image of AGL Distribution
- $ bitbake agl-image-ivi
-
-### Deployment (SDCARD)
-
-NOTE: These instructions are based on GENIVI wiki, [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29).