-interfaces (e.g. USB or Bluetooth) as JSON objects, separated by newlines.
-
-There are two valid message types - single valued and evented.
-
-There may not be a 1:1 relationship between input and output signals - i.e. raw
-engine timing CAN signals may be summarized in an "engine performance" metric on
-the abstract side of the interface.
-
-## Single Valued
-
-The expected format of a single valued message is:
-
- {"name": "steering_wheel_angle", "value": 45}
-
-## Evented
-
-The expected format of an event message is:
-
- {"name": "button_event", "value": "up", "event": "pressed"}
-
-This format is good for something like a button event, where there are two
-discrete pieces of information in the measurement.
-
-## Raw CAN Message format
-
-An OpenXC vehicle interface may also output raw CAN messages. Each CAN message
-is sent as a JSON object, separated by newlines. The format of each object is:
-
- {"bus": 1, "id": 1234, "value": "0x12345678"}
-
-**bus** - the numerical identifier of the CAN bus where this message originated,
- most likely 1 or 2 (for a vehicle interface with 2 CAN controllers).
-
-**id** - the CAN message ID
-
-**data** - up to 8 bytes of data from the CAN message's payload, represented as
- a hexidecimal number in a string. Many JSON parser cannot handle 64-bit
- integers, which is why we are not using a numerical data type.
-
-## Diagnostic Messages