-#CAN Configuration Generator\r
+# CAN Configuration Generator\r
\r
-##Abstract\r
+## Abstract\r
\r
-This tool is used to generate a configuration source file for the Low Level CAN bus binding.\r
-This binding need a configuration provided as a C++ source file.\r
+This tool is used to generate a configuration source file for the [Low Level CAN bus binding](https://github.com/iotbzh/CAN_signaling).\r
+This binding needs a configuration provided as a C++ source file.\r
As long this binding is based on [OpenXC vi-firmware](https://github.com/openxc/vi-firmware), this generator use the JSON format from the [python generator](https://github.com/openxc/openxc-python).\r
The reference documentation of the JSON file can be found [here](https://github.com/openxc/vi-firmware/blob/master/docs/config/reference.rst).\r
\r
## Supported OpenXC items\r
\r
As long as the low level CAN signaling binding doesn't fully support OpenXC yet, this generator is also limited.\r
-For instance, `initializers`, `loopers`, `buses`, `commands` and `handlers` nodes are ignored for now.\r
+For instance, `initializers`, `loopers`, `commands` and `handlers` nodes are ignored for now.\r
This generator will follow OpenXC support status of the low level CAN signaling binding.\r
\r
+The `buses` item will not be supported by this generator because the binding use another way to declare and configure buses. Please refer to the binding's documentation.\r
+\r
## Known issues\r
\r
* Each `diagnostic_message` must define the same `bus` as the binding will use only one bus.\r
\r
Copyright 2017 - iotbzh\r
\r
-Licensed under the [Apache License 2.0](https://github.com/iotbzh/can-config-generator/blob/master/LICENSE)
\ No newline at end of file
+Licensed under the [Apache License 2.0](https://github.com/iotbzh/can-config-generator/blob/master/LICENSE)\r