Referred types used by the Extended Resource Manager. More...

Data Structures
struct	Ucs_Gpio_ResultDetails_t
	Detailed information used for GPIO results. More...

struct	Ucs_Gpio_Result_t
	Result structure of the GPIO Module. More...

Callback Functions
typedef void(*	Ucs_Gpio_CreatePortResCb_t )(uint16_t node_address, uint16_t gpio_port_handle, Ucs_Gpio_Result_t result, void *user_ptr)
	Function signature of result callback used by Ucs_Gpio_CreatePort()

typedef void(*	Ucs_Gpio_ConfigPinModeResCb_t )(uint16_t node_address, uint16_t gpio_port_handle, Ucs_Gpio_PinConfiguration_t pin_cfg_list[], uint8_t list_sz, Ucs_Gpio_Result_t result, void *user_ptr)
	Function signature of result callback used by Ucs_Gpio_SetPinMode() and Ucs_Gpio_GetPinMode().

typedef void(*	Ucs_Gpio_PinStateResCb_t )(uint16_t node_address, uint16_t gpio_port_handle, uint16_t current_state, uint16_t sticky_state, Ucs_Gpio_Result_t result, void *user_ptr)
	Function signature of result callback used by Ucs_Gpio_WritePort() and Ucs_Gpio_ReadPort().

typedef void(*	Ucs_Gpio_TriggerEventResultCb_t )(uint16_t node_address, uint16_t gpio_port_handle, uint16_t rising_edges, uint16_t falling_edges, uint16_t levels, void *user_ptr)
	Function signature of result callback used by Gpio_TriggerEvents()

Enumerations
enum	Ucs_Gpio_PinMode_t { UCS_GPIO_UNAVAILABLE = 0x00U, UCS_GPIO_UNUSED = 0x01U, UCS_GPIO_INPUT = 0x10U, UCS_GPIO_IN_STICKY_HL = 0x11U, UCS_GPIO_IN_STICKY_LL = 0x12U, UCS_GPIO_IN_TRIGGER_RE = 0x13U, UCS_GPIO_IN_TRIGGER_FE = 0x14U, UCS_GPIO_IN_TRIGGER_HL = 0x16U, UCS_GPIO_IN_TRIGGER_LL = 0x17U, UCS_GPIO_IN_DEBOUNCED = 0x30U, UCS_GPIO_IN_DB_TRIGGER_RE = 0x33U, UCS_GPIO_IN_DB_TRIGGER_FE = 0x34U, UCS_GPIO_IN_DB_TRIGGER_HL = 0x36U, UCS_GPIO_IN_DB_TRIGGER_LL = 0x37U, UCS_GPIO_OUT_DEFAULT_LOW = 0x40U, UCS_GPIO_OUT_DEFAULT_HIGH = 0x41U, UCS_GPIO_OUT_OPEN_DRAIN = 0x50U, UCS_GPIO_OUT_OD_TRIGGER_RE = 0x53U, UCS_GPIO_OUT_OD_TRIGGER_FE = 0x54U, UCS_GPIO_OUT_OD_TRIGGER_HL = 0x56U, UCS_GPIO_OUT_OD_TRIGGER_LL = 0x57U }
	The mode of the GPIO pin. More...

enum	Ucs_Gpio_ResultCode_t { UCS_GPIO_RES_SUCCESS = 0x00U, UCS_GPIO_RES_ERR_CMD = 0x01U, UCS_GPIO_RES_ERR_SYNC = 0x02U }
	Result codes of the GPIO Module. More...

enum	Ucs_Gpio_ResultType_t { UCS_GPIO_RESULT_TYPE_TGT = 0x00U, UCS_GPIO_RESULT_TYPE_TX = 0x01U }
	This enumerator specifies the kind of result - Target or Transmission. More...

Detailed Description

Referred types used by the Extended Resource Manager.

Data Structures