The afm-user-daemon

version: 1
Date:    14 March 2016
Author:  José Bollo

Foreword

This document describes what we intend to do. It may happen that our current implementation and the content of this document differ.

In case of differences, it is assumed that this document is right and the implementation is wrong.

Introduction

The daemon afm-user-daemon is in charge of handling applications for one user. Its main tasks are:

The afm-user-daemon takes its orders from the session instance of D-Bus.

The figure below summarizes the situation of the afm-user-daemon in the system.

+------------------------------------------------------------+
|                          User                              |
|                                 +---------------------+    |
|     +---------------------+     |   Smack isolated    |    |
|     |   D-Bus   session   +     |    APPLICATIONS     |    |
|     +----------+----------+     +---------+-----------+    |
|                |                          |                |
|                |                          |                |
|     +----------+--------------------------+-----------+    |
|     |                                                 |    |
|     |                  afm-user-daemon                |    |
|     |                                                 |    |
|     +----------+----------------------+----------+----+    |
|                |                      |          :         |
|                |                      |          :         |
:================|======================|==========:=========:
|                |                      |          :         |
|     +----------+----------+     +-----+-----+    :         |
|     |   D-Bus   system    +-----+  CYNARA   |    :         |
|     +----------+----------+     +-----+-----+    :         |
|                |                      |          :         |
|     +----------+---------+    +-------+----------+----+    |
|     | afm-system-daemon  +----+   SECURITY-MANAGER    |    |
|     +--------------------+    +-----------------------+    |
|                                                            |
|                          System                            |
+------------------------------------------------------------+

Tasks of afm-user-daemon

Maintaining list of applications

At start afm-user-daemon scans the directories containing the applications and load in memory the list applications availables to the current user.

When afm-system-daemon installs or removes an application, it sends the signal org.AGL.afm.system.changed on success. If it receives that signal, afm-user-daemon rebuild its list of applications.

afm-user-daemon provides the data that it collected about application to its clients that either want to get that list or to get information about one application.

Launching applications

afm-user-daemon launchs the applications. This means that its builds a secure environment for the application and then start it inside that secured environment.

Applications of different kind can be launched.

This is set using a configuration file that describes how to launch an application of a given kind for a given mode.

There is two launching modes: local or remote.

Launching an application locally means that the application and its binder are launcher together.

Launching application remotely means that only the binder is launched for the application.

Once launched, running instances of application receive a runid that identify them.

Managing instances of running applications

afm-user-daemon manages the list of applications that it launched.

With the good permissions, a client can get the list of the running instances and details about a specific running instance. It can also terminate, stop or continue a given application.

Installing and uninstalling applications

If the client has the good permission, afm-user-daemon delegates that task to afm-system-daemon.

Starting afm-user-daemon

afm-user-daemon is launched as a systemd service attached to user sessions. Normally, the service file is located at /usr/lib/systemd/user/afm-user-daemon.service.

The options for launching afm-user-daemon are:

-a
--application directory

     Includes the given application directory to
     the database base of applications.

-r
--root directory

     Includes the root application directory to
     the database base of applications.

     Note that the default root directory for
     applications is always added. It is defined
     to be /usr/share/afm/applications (may change).

-m
--mode (local|remote)

     Set the default launch mode.
     The default value is 'local'

-d
--daemon

     Daemonizes the process. It is not needed by sytemd.

-q
--quiet

     Reduces the verbosity (can be repeated).

-v
--verbose

     Increases the verbosity (can be repeated).

-h
--help

     Prints a short help.

Configuration of the launcher

It contains rules for launching applications. When afm-user-daemon need to launch an application, it looks to the mode of launch, local or remote, and the type of the application as given by the file config.xml of the widget.

This couple mode and type allows to select the rule.

The configuration file is /etc/afm/afm-launch.conf.

It contains sections and rules. It can also contain comments and empty lines to improve the readability.

The separators are space and tabulation, any other character is meaning something.

The format is line oriented. The new line character separate the lines.

Lines having only separators are blank lines and are skipped. Line having the character # (sharp) as first not separator character are comment lines and are ignored.

Lines starting with a not separator character are differents of lines starting with a separator character.

The grammar of the configuration file is defined below:

CONF: *COMMENT *SECTION

SECTION: MODE *RULE

RULE: +TYPE VECTOR ?VECTOR

MODE: 'mode' +SEP ('local' | 'remote') *SEP EOL

TYPE: DATA *SEP EOL

VECTOR: +SEP DATA *(+SEP NDATA) *SEP EOL

DATA: CHAR *NCHAR
NDATA: +NCHAR

EOL: NL *COMMENT
COMMENT: *SEP CMT *(SEP | NCHAR) NL

NL: '\x0a'
SEP: '\x20' | '\x09'
CMT: '#'
CHAR: '\x00'..'\x08' | '\x0b'..'\x1f' | '\x21' | '\x22' | '\x24'..'\xff'
NCHAR: CMT | CHAR

Here is a sample of configuration file for defining how to launch an application declared of types application/x-executable, text/x-shellscript and text/html in mode local:

mode local

application/x-executable
text/x-shellscript
    %r/%c

text/html
    /usr/bin/afb-daemon --mode=local --readyfd=%R --alias=/icons:%I --port=%P --rootdir=%r --token=%S --sessiondir=%D/.afb-daemon
    /usr/bin/web-runtime http://localhost:%P/%c?token=%S

This shows that:

mode local

Within this mode, the launchers have either one or two vectors describing them. All of these vectors are treated as programs and are executed with the system call ‘execve’.

The first vector is the leader vector and it defines the process group. The second vector (if any) is attached to the group defined by this first vector.

mode remote

Within this mode, the launchers have either one or two vectors describing them.

The first vector is treated as a program and is executed with the system call ‘execve’.

The second vector (if any) defines a text that is returned to the caller. This mechanism can be used to return the uri to connect to for executing the application remotely.

The daemon afm-user-daemon allocates a port for the running the application remotely. The current implmentation of the port allocation is just incremental. A more reliable (cacheable and same-originable) allocation is to be defined.

%substitutions

Vectors can include sequences of 2 characters that have a special meaning. These sequences are named %substitution because their first character is the percent sign (%) and because each occurrence of the sequence is replaced, at launch time, by the value associated to sequences.

Here is the list of %substitutions:

The D-Bus interface

Overview of the dbus interface

afm-user-daemon takes its orders from the session instance of D-Bus. The use of D-Bus is great because it allows to implement discovery and signaling.

The dbus of the session is by default adressed by the environment variable DBUS_SESSION_BUS_ADDRESS. Using systemd the variable DBUS_SESSION_BUS_ADDRESS is automatically set for user sessions.

The afm-user-daemon is listening with the destination name org.AGL.afm.user at the object of path /org/AGL/afm/user on the interface org.AGL.afm.user for the below detailed members runnables, detail, start, terminate, stop, continue, runners, state, install and uninstall.

D-Bus is mainly used for signaling and discovery. Its optimized typed protocol is not used except for transmitting only one string in both directions.

The client and the service are using JSON serialisation to exchange data.

The D-Bus interface is defined by:

The signature of any member of the interface is string -> string for JSON -> JSON.

This is the normal case. In case of error, the current implmentation returns a dbus error that is a string.

Here is an example that use dbus-send to query data on installed applications.

dbus-send --session --print-reply \
    --dest=org.AGL.afm.user \
    /org/AGL/afm/user \
    org.AGL.afm.user.runnables string:true

Using afm-util

The command line tool afm-util uses dbus-send to send orders to afm-user-daemon. This small scripts allows to send command to afm-user-daemon either interactively at shell prompt or scriptically.

The syntax is simple: it accept a command and if the command requires it, the argument to the command.

Here is the summary of afm-util:

Here is how to list applications using afm-util:

afm-util runnables

The protocol over D-Bus

Recall:


Method org.AGL.afm.user.detail

Description: Get details about an application from its id.

Input: the id of the application as below.

Either just a string:

"appli@x.y"

Or an object having the field “id” of type string:

{"id":"appli@x.y"}

Output: A JSON object describing the application containing the fields described below.

{
  "id":          string, the application id (id@version)
  "version":     string, the version of the application
  "width":       integer, requested width of the application
  "height":      integer, resqueted height of the application
  "name":        string, the name of the application
  "description": string, the description of the application
  "shortname":   string, the short name of the application
  "author":      string, the author of the application
}

Method org.AGL.afm.user.runnables

Description: Get the list of applications that can be run.

Input: any valid json entry, can be anything except null.

output: An array of description of the runnable applications. Each item of the array contains an object containing the detail of an application as described above for the method org.AGL.afm.user.detail.


Method org.AGL.afm.user.install

Description: Install an application from its widget file.

If an application of the same id and version exists, it is not reinstalled except if force=true.

Applications are installed in the subdirectories of the common directory of applications. If root is specified, the application is installed under the sub-directories of the root defined.

Note that this methods is a simple accessor to the method org.AGL.afm.system.install of afm-system-daemon.

After the installation and before returning to the sender, afm-user-daemon sends the signal org.AGL.afm.user.changed.

Input: The path of the widget file to install and, optionaly, a flag to force reinstallation, and, optionaly, a root directory.

Either just a string being the absolute path of the widget file:

"/a/path/driving/to/the/widget"

Or an object:

{
  "wgt": "/a/path/to/the/widget",
  "force": false,
  "root": "/a/path/to/the/root"
}

“wgt” and “root” must be absolute paths.

output: An object with the field “added” being the string for the id of the added application.

{"added":"appli@x.y" }

Method org.AGL.afm.user.uninstall

Description: Uninstall an application from its id.

Note that this methods is a simple accessor to the method org.AGL.afm.system.uninstall of afm-system-daemon.

After the uninstallation and before returning to the sender, afm-user-daemon sends the signal org.AGL.afm.user.changed.

Input: the id of the application and, otpionaly, the path to root of the application.

Either a string:

"appli@x.y"

Or an object:

{
  "id": "appli@x.y",
  "root": "/a/path/to/the/root"
}

output: the value ‘true’.


Method org.AGL.afm.user.start

Description:

Input: the id of the application and, optionaly, the start mode as below.

Either just a string:

"appli@x.y"

Or an object having the field “id” of type string and optionaly a field mode:

{"id":"appli@x.y","mode":"local"}

The field “mode” as a string value being either “local” or “remote”.

output: The runid of the application launched. The runid is an integer.


Method org.AGL.afm.user.terminate

Description: Terminates the application of runid.

Input: The runid (an integer) of the running instance to terminate.

output: the value ‘true’.


Method org.AGL.afm.user.stop

Description: Stops the application of runid until terminate or continue.

Input: The runid (an integer) of the running instance to stop.

output: the value ‘true’.


Method org.AGL.afm.user.continue

Description: Continues the application of runid previously stopped.

Input: The runid (an integer) of the running instance to continue.

output: the value ‘true’.


Method org.AGL.afm.user.state

Description: Get informations about a running instance of runid.

Input: The runid (an integer) of the running instance inspected.

output: An object describing the state of the instance. It contains: the runid (an integer), the id of the running application (a string), the state of the application (a string being either “starting”, “running” or “stopped”).

Example of returned state:

{
  "runid": 2,
  "state": "running",
  "id": "appli@x.y"
}

Method org.AGL.afm.user.runners

Description: Get the list of the currently running instances.

Input: anything.

output: An array of states, one per running instance, as returned by the methodd org.AGL.afm.user.state.

The afb plugin

The base of the path is FWKAPI = /api/fwk

request FWKAPI/runnables – get the list of applications => [ APPDESC… ]

request FWKAPI/detail?id=APPID subject to languages tuning => { “id”: “APPID”, “name”: “name”, “description”: “description”, “license”: “license”, “author”: “author” }

/ request FWKAPI/icon?id=APPID subject to languages tuning => the icon image /

request FWKAPI/run?id=APPID => { “status”: “done/error”, “data”: { “runid”: “RUNID” } }

request FWKAPI/running => [ { “id”: “RUNID”, “appid”: “APPID”, “state”: … }… ]

request FWKAPI/state?id=RUNID => { “id”: “RUNID”, “appid”: “APPID”, “state”: … }

request FWKAPI/stop?id=RUNID => { “error”: “message” ou “done”: “RUNID” }

request FWKAPI/suspend?id=RUNID => { “error”: “message” ou “done”: “RUNID” }

request FWKAPI/resume?id=RUNID => { “error”: “message” ou “done”: “RUNID” }

/* request FWKAPI/features => returns the features of the current application

request FWKAPI/preferences => returns the features of the current application */