2 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
20 #include "window_manager.hpp"
21 #include "json_helper.hpp"
22 #include "wm_config.hpp"
23 #include "applist.hpp"
27 #include <systemd/sd-event.h>
33 static const uint64_t kTimeOut = 3ULL; /* 3s */
35 /* DrawingArea name used by "{layout}.{area}" */
36 const char kNameLayoutNormal[] = "normal";
37 const char kNameLayoutSplit[] = "split";
38 const char kNameAreaFull[] = "full";
39 const char kNameAreaMain[] = "main";
40 const char kNameAreaSub[] = "sub";
42 /* Key for json obejct */
43 const char kKeyDrawingName[] = "drawing_name";
44 const char kKeyDrawingArea[] = "drawing_area";
45 const char kKeyDrawingRect[] = "drawing_rect";
46 const char kKeyX[] = "x";
47 const char kKeyY[] = "y";
48 const char kKeyWidth[] = "width";
49 const char kKeyHeight[] = "height";
50 const char kKeyWidthPixel[] = "width_pixel";
51 const char kKeyHeightPixel[] = "height_pixel";
52 const char kKeyWidthMm[] = "width_mm";
53 const char kKeyHeightMm[] = "height_mm";
54 const char kKeyIds[] = "ids";
56 static sd_event_source *g_timer_ev_src = nullptr;
57 static AppList g_app_list;
64 result<json> file_to_json(char const *filename)
67 std::ifstream i(filename);
70 HMI_DEBUG("wm", "Could not open config file, so use default layer information");
71 j = default_layers_json;
81 struct result<layer_map> load_layer_map(char const *filename)
83 HMI_DEBUG("wm", "loading IDs from %s", filename);
85 auto j = file_to_json(filename);
88 return Err<layer_map>(j.unwrap_err());
90 json jids = j.unwrap();
92 return to_layer_map(jids);
95 static int processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
97 HMI_NOTICE("wm", "Time out occurs because the client replys endDraw slow, so revert the request");
98 reinterpret_cast<wm::WindowManager *>(userdata)->timerHandler();
107 WindowManager::WindowManager(wl::display *d)
114 pending_events(false)
116 char const *path_layers_json = getenv("AFM_APP_INSTALL_DIR");
118 if (!path_layers_json)
120 HMI_ERROR("wm", "AFM_APP_INSTALL_DIR is not defined");
121 path = std::string(path_layers_json);
125 path = std::string(path_layers_json) + std::string("/etc/layers.json");
131 auto l = load_layer_map(path.c_str());
134 this->layers = l.unwrap();
138 HMI_ERROR("wm", "%s", l.err().value());
142 catch (std::exception &e)
144 HMI_ERROR("wm", "Loading of configuration failed: %s", e.what());
148 int WindowManager::init()
151 if (!this->display->ok())
156 if (this->layers.mapping.empty())
158 HMI_ERROR("wm", "No surface -> layer mapping loaded");
162 // TODO: application requests by old role,
163 // so create role map (old, new)
165 this->loadOldRoleDb();
168 for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
170 map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
173 this->display->add_global_handler(
174 "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
175 this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
178 this->display->add_global_handler(
179 "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
181 std::make_unique<struct compositor::controller>(r, name, v);
183 // Init controller hooks
184 this->controller->chooks = &this->chooks;
186 // This protocol needs the output, so lets just add our mapping here...
187 this->controller->add_proxy_to_id_mapping(
188 this->outputs.back()->proxy.get(),
189 wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
190 this->outputs.back()->proxy.get())));
193 this->controller->create_screen(this->outputs.back()->proxy.get());
195 // Set display to controller
196 this->controller->display = this->display;
199 // First level objects
200 this->display->roundtrip();
201 // Second level objects
202 this->display->roundtrip();
203 // Third level objects
204 this->display->roundtrip();
210 int WindowManager::dispatch_pending_events()
212 if (this->pop_pending_events())
214 this->display->dispatch_pending();
220 void WindowManager::set_pending_events()
222 this->pending_events.store(true, std::memory_order_release);
225 result<int> WindowManager::api_request_surface(char const *appid, char const *drawing_name)
227 // TODO: application requests by old role,
228 // so convert role old to new
229 const char *role = this->convertRoleOldToNew(drawing_name);
231 auto lid = this->layers.get_layer_id(std::string(role));
235 * register drawing_name as fallback and make it displayed.
237 lid = this->layers.get_layer_id(std::string("fallback"));
238 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", role);
241 return Err<int>("Drawing name does not match any role, fallback is disabled");
245 auto rname = this->lookup_id(role);
248 // name does not exist yet, allocate surface id...
249 auto id = int(this->id_alloc.generate_id(role));
250 this->layers.add_surface(id, *lid);
252 // set the main_surface[_name] here and now
253 if (!this->layers.main_surface_name.empty() &&
254 this->layers.main_surface_name == drawing_name)
256 this->layers.main_surface = id;
257 HMI_DEBUG("wm", "Set main_surface id to %u", id);
260 // add client into the db
261 std::string appid_str(appid);
262 g_app_list.addClient(appid_str, *lid, id, std::string(role));
264 // Set role map of (new, old)
265 this->rolenew2old[role] = std::string(drawing_name);
270 // Check currently registered drawing names if it is already there.
271 return Err<int>("Surface already present");
274 char const *WindowManager::api_request_surface(char const *appid, char const *drawing_name,
279 // TODO: application requests by old role,
280 // so convert role old to new
281 const char *role = this->convertRoleOldToNew(drawing_name);
283 auto lid = this->layers.get_layer_id(std::string(role));
284 unsigned sid = std::stol(ivi_id);
289 * register drawing_name as fallback and make it displayed.
291 lid = this->layers.get_layer_id(std::string("fallback"));
292 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", role);
295 return "Drawing name does not match any role, fallback is disabled";
299 auto rname = this->lookup_id(role);
303 return "Surface already present";
306 // register pair drawing_name and ivi_id
307 this->id_alloc.register_name_id(role, sid);
308 this->layers.add_surface(sid, *lid);
310 // this surface is already created
311 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", sid, *lid);
313 this->controller->layers[*lid]->add_surface(sid);
314 this->layout_commit();
316 // add client into the db
317 std::string appid_str(appid);
318 g_app_list.addClient(appid_str, *lid, sid, std::string(role));
320 // Set role map of (new, old)
321 this->rolenew2old[role] = std::string(drawing_name);
327 * This function is substitute of requestSurface
328 * If surface creation is faster than application request of this function,
329 * WM will bind surfaceID with application and role.
330 * If surface creation is slower than application request of thie function,
331 * WM will put Client into pending list.
334 * Application can request with pid but this is temporary solution for now.
335 * This will be removed.
337 bool WindowManager::api_set_role(char const *appid, char const *drawing_name, unsigned pid){
338 std::string id = appid;
339 std::string role = drawing_name;
340 unsigned surface = 0;
341 WMError wm_err = WMError::UNKNOWN;
344 // get layer ID which role should be in
345 auto lid = this->layers.get_layer_id(role);
349 * register drawing_name as fallback and make it displayed.
351 lid = this->layers.get_layer_id(std::string("fallback"));
352 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", role.c_str());
355 HMI_ERROR("wm", "Drawing name does not match any role, fallback is disabled");
361 // search floating surfaceID from pid if pid is designated.
362 // It is not good that application request with its pid
363 wm_err = g_app_list.popFloatingSurface(pid, &surface);
366 // get floating surface with appid. If WM queries appid from pid,
367 // WM can bind surface and role with appid(not implemented yet)
368 //wm_err = g_app_list.popFloatingSurface(id);
370 if(wm_err != WMError::SUCCESS){
371 HMI_ERROR("wm", "No floating surface for app: %s", id.c_str());
372 g_app_list.addFloatingClient(id, *lid, role);
373 HMI_NOTICE("wm", "%s : Waiting for surface creation", id.c_str());
378 if (g_app_list.contains(id))
380 HMI_INFO("wm", "Add role: %s with surface: %d. Client %s has multi surfaces.",
381 role.c_str(), surface, id.c_str());
382 wm_err = g_app_list.appendRole(id, role, surface);
383 if(wm_err != WMError::SUCCESS){
384 HMI_INFO("wm", errorDescription(wm_err));
388 HMI_INFO("wm", "Create new client: %s, surface: %d into layer: %d with role: %s",
389 id.c_str(), surface, *lid, role.c_str());
390 g_app_list.addClient(id, *lid, surface, role);
393 // register pair drawing_name and ivi_id
394 this->id_alloc.register_name_id(role.c_str(), surface);
395 this->layers.add_surface(surface, *lid);
397 // this surface is already created
398 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface, *lid);
400 const auto &o_layer = this->layers.get_layer(*lid);
401 auto rect = o_layer.value().rect;
404 rect.w = this->controller->output_size.w + 1 + rect.w;
408 rect.h = this->controller->output_size.h + 1 + rect.h;
411 this->controller->layers[*lid]->add_surface(surface);
412 this->layout_commit();
417 void WindowManager::api_activate_surface(char const *appid, char const *drawing_name,
418 char const *drawing_area, const reply_func &reply)
422 // TODO: application requests by old role,
423 // so convert role old to new
424 const char *c_role = this->convertRoleOldToNew(drawing_name);
426 std::string id = appid;
427 std::string role = c_role;
428 std::string area = drawing_area;
430 if(!g_app_list.contains(id))
432 reply("app doesn't request 'requestSurface' or 'setRole' yet");
435 auto client = g_app_list.lookUpClient(id);
437 unsigned srfc = client->surfaceID(role);
440 HMI_ERROR("wm", "role sould be set with surface");
441 reply("role sould be set with surface");
444 g_app_list.removeFloatingSurface(client->surfaceID(role));
446 Task task = Task::TASK_ALLOCATE;
447 unsigned req_num = 0;
448 WMError ret = WMError::UNKNOWN;
450 ret = this->setRequest(id, role, area, task, &req_num);
452 if(ret != WMError::SUCCESS)
454 HMI_ERROR("wm", errorDescription(ret));
455 reply("Failed to set request");
460 if (req_num != g_app_list.currentRequestNumber())
462 // Add request, then invoked after the previous task is finished
463 HMI_SEQ_DEBUG(req_num, "request is accepted");
470 ret = this->doTransition(req_num);
472 if (ret != WMError::SUCCESS)
475 HMI_SEQ_ERROR(req_num, errorDescription(ret));
476 g_app_list.removeRequest(req_num);
477 this->processNextRequest();
481 void WindowManager::api_deactivate_surface(char const *appid, char const *drawing_name,
482 const reply_func &reply)
486 // TODO: application requests by old role,
487 // so convert role old to new
488 const char *c_role = this->convertRoleOldToNew(drawing_name);
493 std::string id = appid;
494 std::string role = c_role;
495 std::string area = ""; //drawing_area;
496 Task task = Task::TASK_RELEASE;
497 unsigned req_num = 0;
498 WMError ret = WMError::UNKNOWN;
500 ret = this->setRequest(id, role, area, task, &req_num);
502 if (ret != WMError::SUCCESS)
504 HMI_ERROR("wm", errorDescription(ret));
505 reply("Failed to set request");
510 if (req_num != g_app_list.currentRequestNumber())
512 // Add request, then invoked after the previous task is finished
513 HMI_SEQ_DEBUG(req_num, "request is accepted");
520 ret = this->doTransition(req_num);
522 if (ret != WMError::SUCCESS)
525 HMI_SEQ_ERROR(req_num, errorDescription(ret));
526 g_app_list.removeRequest(req_num);
527 this->processNextRequest();
531 void WindowManager::api_enddraw(char const *appid, char const *drawing_name)
533 // TODO: application requests by old role,
534 // so convert role old to new
535 const char *c_role = this->convertRoleOldToNew(drawing_name);
537 std::string id = appid;
538 std::string role = c_role;
539 unsigned current_req = g_app_list.currentRequestNumber();
540 bool result = g_app_list.setEndDrawFinished(current_req, id, role);
544 HMI_ERROR("wm", "%s is not in transition state", id.c_str());
548 if (g_app_list.endDrawFullfilled(current_req))
550 // do task for endDraw
552 WMError ret = this->doEndDraw(current_req);
554 if(ret != WMError::SUCCESS)
556 //this->emit_error();
558 this->emitScreenUpdated(current_req);
559 HMI_SEQ_INFO(current_req, "Finish request status: %s", errorDescription(ret));
561 g_app_list.removeRequest(current_req);
563 this->processNextRequest();
567 HMI_SEQ_INFO(current_req, "Wait other App call endDraw");
572 result<json_object *> WindowManager::api_get_display_info()
575 if (!this->controller)
577 return Err<json_object *>("ivi_controller global not available");
581 compositor::size o_size = this->controller->output_size;
582 compositor::size p_size = this->controller->physical_size;
584 json_object *object = json_object_new_object();
585 json_object_object_add(object, kKeyWidthPixel, json_object_new_int(o_size.w));
586 json_object_object_add(object, kKeyHeightPixel, json_object_new_int(o_size.h));
587 json_object_object_add(object, kKeyWidthMm, json_object_new_int(p_size.w));
588 json_object_object_add(object, kKeyHeightMm, json_object_new_int(p_size.h));
590 return Ok<json_object *>(object);
593 result<json_object *> WindowManager::api_get_area_info(char const *drawing_name)
595 HMI_DEBUG("wm", "called");
597 // TODO: application requests by old role,
598 // so convert role old to new
599 const char *role = this->convertRoleOldToNew(drawing_name);
601 // Check drawing name, surface/layer id
602 auto const &surface_id = this->lookup_id(role);
605 return Err<json_object *>("Surface does not exist");
608 if (!this->controller->surface_exists(*surface_id))
610 return Err<json_object *>("Surface does not exist in controller!");
613 auto layer_id = this->layers.get_layer_id(*surface_id);
616 return Err<json_object *>("Surface is not on any layer!");
619 auto o_state = *this->layers.get_layout_state(*surface_id);
620 if (o_state == nullptr)
622 return Err<json_object *>("Could not find layer for surface");
625 struct LayoutState &state = *o_state;
626 if ((state.main != *surface_id) && (state.sub != *surface_id))
628 return Err<json_object *>("Surface is inactive");
631 // Set area rectangle
632 compositor::rect area_info = this->area_info[*surface_id];
633 json_object *object = json_object_new_object();
634 json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
635 json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
636 json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
637 json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));
639 return Ok<json_object *>(object);
642 void WindowManager::api_ping() { this->dispatch_pending_events(); }
644 void WindowManager::send_event(char const *evname, char const *label)
646 HMI_DEBUG("wm", "%s: %s(%s)", __func__, evname, label);
648 json_object *j = json_object_new_object();
649 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
651 int ret = afb_event_push(this->map_afb_event[evname], j);
654 HMI_DEBUG("wm", "afb_event_push failed: %m");
658 void WindowManager::send_event(char const *evname, char const *label, char const *area,
659 int x, int y, int w, int h)
661 HMI_DEBUG("wm", "%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
662 __func__, evname, label, area, x, y, w, h);
664 json_object *j_rect = json_object_new_object();
665 json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
666 json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
667 json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
668 json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));
670 json_object *j = json_object_new_object();
671 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
672 json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
673 json_object_object_add(j, kKeyDrawingRect, j_rect);
675 int ret = afb_event_push(this->map_afb_event[evname], j);
678 HMI_DEBUG("wm", "afb_event_push failed: %m");
685 void WindowManager::surface_created(uint32_t surface_id)
687 // For set role function
688 HMI_DEBUG("wm", "Get surface's owner");
689 this->controller->get_surface_properties(surface_id, IVI_WM_PARAM_SIZE);
691 auto layer_id = this->layers.get_layer_id(surface_id);
694 HMI_DEBUG("wm", "Newly created surfce %d is not associated with any layer!",
699 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface_id, *layer_id);
701 this->controller->layers[*layer_id]->add_surface(surface_id);
702 this->layout_commit();
705 void WindowManager::surface_removed(uint32_t surface_id)
707 HMI_DEBUG("wm", "surface_id is %u", surface_id);
708 g_app_list.removeSurface(surface_id);
711 void WindowManager::surface_properties(unsigned surface_id, unsigned pid)
713 HMI_DEBUG("wm", "get surface properties");
715 // search pid from surfaceID
716 json_object *response;
717 afb_service_call_sync("afm-main", "runners", nullptr, &response);
719 // retrieve appid from pid from application manager
720 std::string appid = "";
721 if(response == nullptr)
723 HMI_ERROR("wm", "No runners");
727 // check appid then add it to the client
728 HMI_INFO("wm", "Runners:%s", json_object_get_string(response));
729 int size = json_object_array_length(response);
730 for(int i = 0; i < size; i++)
732 json_object *j = json_object_array_get_idx(response, i);
733 const char* id = jh::getStringFromJson(j, "id");
734 int runid = jh::getIntFromJson(j, "runid");
735 if(id && (runid > 0))
745 json_object_put(response);
747 g_app_list.addFloatingSurface(appid, surface_id, pid);
750 void WindowManager::removeClient(const std::string &appid)
752 HMI_DEBUG("wm", "Remove clinet %s from list", appid.c_str());
753 g_app_list.removeClient(appid);
756 void WindowManager::exceptionProcessForTransition()
758 unsigned req_num = g_app_list.currentRequestNumber();
759 HMI_SEQ_NOTICE(req_num, "Process exception handling for request. Remove current request %d", req_num);
760 g_app_list.removeRequest(req_num);
761 HMI_SEQ_NOTICE(g_app_list.currentRequestNumber(), "Process next request if exists");
762 this->processNextRequest();
765 void WindowManager::timerHandler()
767 unsigned req_num = g_app_list.currentRequestNumber();
768 HMI_SEQ_DEBUG(req_num, "Timer expired remove Request");
769 g_app_list.reqDump();
770 g_app_list.removeRequest(req_num);
771 this->processNextRequest();
775 ******* Private Functions *******
778 bool WindowManager::pop_pending_events()
781 return this->pending_events.compare_exchange_strong(
782 x, false, std::memory_order_consume);
785 optional<int> WindowManager::lookup_id(char const *name)
787 return this->id_alloc.lookup(std::string(name));
789 optional<std::string> WindowManager::lookup_name(int id)
791 return this->id_alloc.lookup(id);
797 int WindowManager::init_layers()
799 if (!this->controller)
801 HMI_ERROR("wm", "ivi_controller global not available");
805 if (this->outputs.empty())
807 HMI_ERROR("wm", "no output was set up!");
812 wm_config.loadConfigs();
814 auto &c = this->controller;
816 auto &o = this->outputs.front();
817 auto &s = c->screens.begin()->second;
818 auto &layers = c->layers;
820 this->layers.loadAreaDb();
821 const compositor::rect base = this->layers.getAreaSize("fullscreen");
823 const std::string aspect_setting = wm_config.getConfigAspect();
824 const compositor::rect scale_rect =
825 this->layers.getScaleDestRect(o->width, o->height, aspect_setting);
827 // Write output dimensions to ivi controller...
828 c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
829 c->physical_size = compositor::size{uint32_t(o->physical_width),
830 uint32_t(o->physical_height)};
838 // Quick and dirty setup of layers
839 for (auto const &i : this->layers.mapping)
841 c->layer_create(i.second.layer_id, scale_rect.w, scale_rect.h);
842 auto &l = layers[i.second.layer_id];
843 l->set_source_rectangle(0, 0, base.w, base.h);
844 l->set_destination_rectangle(
845 scale_rect.x, scale_rect.y, scale_rect.w, scale_rect.h);
846 l->set_visibility(1);
847 HMI_DEBUG("wm", "Setting up layer %s (%d) for surface role match \"%s\"",
848 i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
851 // Add layers to screen
852 s->set_render_order(this->layers.layers);
854 this->layout_commit();
859 void WindowManager::surface_set_layout(int surface_id, const std::string& area)
861 if (!this->controller->surface_exists(surface_id))
863 HMI_ERROR("wm", "Surface %d does not exist", surface_id);
867 auto o_layer_id = this->layers.get_layer_id(surface_id);
871 HMI_ERROR("wm", "Surface %d is not associated with any layer!", surface_id);
875 uint32_t layer_id = *o_layer_id;
877 auto const &layer = this->layers.get_layer(layer_id);
878 auto rect = this->layers.getAreaSize(area);
879 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "%s : x:%d y:%d w:%d h:%d", area.c_str(),
880 rect.x, rect.y, rect.w, rect.h);
881 auto &s = this->controller->surfaces[surface_id];
888 HMI_DEBUG("wm", "surface_set_layout for surface %u on layer %u", surface_id,
891 // set destination to the display rectangle
892 s->set_destination_rectangle(x, y, w, h);
894 // update area information
895 this->area_info[surface_id].x = x;
896 this->area_info[surface_id].y = y;
897 this->area_info[surface_id].w = w;
898 this->area_info[surface_id].h = h;
900 HMI_DEBUG("wm", "Surface %u now on layer %u with rect { %d, %d, %d, %d }",
901 surface_id, layer_id, x, y, w, h);
904 void WindowManager::layout_commit()
906 this->controller->commit_changes();
907 this->display->flush();
910 void WindowManager::emit_activated(char const *label)
912 this->send_event(kListEventName[Event_Active], label);
915 void WindowManager::emit_deactivated(char const *label)
917 this->send_event(kListEventName[Event_Inactive], label);
920 void WindowManager::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
922 this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
925 void WindowManager::emit_syncdraw(const std::string &role, const std::string &area)
927 compositor::rect rect = this->layers.getAreaSize(area);
928 this->send_event(kListEventName[Event_SyncDraw],
929 role.c_str(), area.c_str(), rect.x, rect.y, rect.w, rect.h);
932 void WindowManager::emit_flushdraw(char const *label)
934 this->send_event(kListEventName[Event_FlushDraw], label);
937 void WindowManager::emit_visible(char const *label, bool is_visible)
939 this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
942 void WindowManager::emit_invisible(char const *label)
944 return emit_visible(label, false);
947 void WindowManager::emit_visible(char const *label) { return emit_visible(label, true); }
949 void WindowManager::activate(int id)
951 auto ip = this->controller->sprops.find(id);
952 if (ip != this->controller->sprops.end())
954 this->controller->surfaces[id]->set_visibility(1);
956 this->lookup_name(id).value_or("unknown-name").c_str();
959 if ((0 == strcmp(label, "radio")) ||
960 (0 == strcmp(label, "music")) ||
961 (0 == strcmp(label, "video")) ||
962 (0 == strcmp(label, "map")))
964 for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
969 this->surface_bg.erase(i);
971 // Remove from BG layer (999)
972 HMI_DEBUG("wm", "Remove %s(%d) from BG layer", label, id);
973 this->controller->layers[999]->remove_surface(id);
975 // Add to FG layer (1001)
976 HMI_DEBUG("wm", "Add %s(%d) to FG layer", label, id);
977 this->controller->layers[1001]->add_surface(id);
979 for (int j : this->surface_bg)
981 HMI_DEBUG("wm", "Stored id:%d", j);
989 this->layout_commit();
991 // TODO: application requests by old role,
992 // so convert role new to old for emitting event
993 const char* old_role = this->rolenew2old[label].c_str();
995 this->emit_visible(old_role);
996 this->emit_activated(old_role);
1000 void WindowManager::deactivate(int id)
1002 auto ip = this->controller->sprops.find(id);
1003 if (ip != this->controller->sprops.end())
1006 this->lookup_name(id).value_or("unknown-name").c_str();
1009 if ((0 == strcmp(label, "radio")) ||
1010 (0 == strcmp(label, "music")) ||
1011 (0 == strcmp(label, "video")) ||
1012 (0 == strcmp(label, "map")))
1016 this->surface_bg.push_back(id);
1018 // Remove from FG layer (1001)
1019 HMI_DEBUG("wm", "Remove %s(%d) from FG layer", label, id);
1020 this->controller->layers[1001]->remove_surface(id);
1022 // Add to BG layer (999)
1023 HMI_DEBUG("wm", "Add %s(%d) to BG layer", label, id);
1024 this->controller->layers[999]->add_surface(id);
1026 for (int j : surface_bg)
1028 HMI_DEBUG("wm", "Stored id:%d", j);
1033 this->controller->surfaces[id]->set_visibility(0);
1037 this->layout_commit();
1039 // TODO: application requests by old role,
1040 // so convert role new to old for emitting event
1041 const char* old_role = this->rolenew2old[label].c_str();
1043 this->emit_deactivated(old_role);
1044 this->emit_invisible(old_role);
1048 WMError WindowManager::setRequest(const std::string& appid, const std::string &role, const std::string &area,
1049 Task task, unsigned* req_num)
1051 if (!g_app_list.contains(appid))
1053 return WMError::NOT_REGISTERED;
1056 auto client = g_app_list.lookUpClient(appid);
1061 unsigned current = g_app_list.currentRequestNumber();
1062 unsigned requested_num = g_app_list.getRequestNumber(appid);
1063 if (requested_num != 0)
1065 HMI_SEQ_INFO(requested_num,
1066 "%s %s %s request is already queued", appid.c_str(), role.c_str(), area.c_str());
1067 return REQ_REJECTED;
1070 WMRequest req = WMRequest(appid, role, area, task);
1071 unsigned new_req = g_app_list.addRequest(req);
1073 g_app_list.reqDump();
1075 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", appid.c_str(), role.c_str(), area.c_str());
1077 return WMError::SUCCESS;
1080 WMError WindowManager::doTransition(unsigned req_num)
1082 HMI_SEQ_DEBUG(req_num, "check policy");
1083 WMError ret = this->checkPolicy(req_num);
1084 if (ret != WMError::SUCCESS)
1088 HMI_SEQ_DEBUG(req_num, "Start transition.");
1089 ret = this->startTransition(req_num);
1093 WMError WindowManager::checkPolicy(unsigned req_num)
1098 // get current trigger
1101 WMError ret = WMError::LAYOUT_CHANGE_FAIL;
1102 auto trigger = g_app_list.getRequest(req_num, &found);
1105 ret = WMError::NO_ENTRY;
1108 std::string req_area = trigger.area;
1110 // >>>> Compatible with current window manager until policy manager coming
1111 if (trigger.task == Task::TASK_ALLOCATE)
1113 HMI_SEQ_DEBUG(req_num, "Check split or not");
1114 const char *msg = this->check_surface_exist(trigger.role.c_str());
1118 HMI_SEQ_ERROR(req_num, msg);
1119 ret = WMError::LAYOUT_CHANGE_FAIL;
1123 auto const &surface_id = this->lookup_id(trigger.role.c_str());
1124 auto o_state = *this->layers.get_layout_state(*surface_id);
1125 struct LayoutState &state = *o_state;
1127 unsigned curernt_sid = state.main;
1128 split = this->can_split(state, *surface_id);
1132 HMI_SEQ_DEBUG(req_num, "Split happens");
1133 // Get current visible role
1134 std::string add_role = this->lookup_name(state.main).value();
1136 std::string add_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaMain);
1137 // Change request area
1138 req_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaSub);
1139 HMI_SEQ_NOTICE(req_num, "Change request area from %s to %s, because split happens",
1140 trigger.area.c_str(), req_area.c_str());
1141 // set another action
1142 std::string add_name = g_app_list.getAppID(curernt_sid, add_role, &found);
1145 HMI_SEQ_ERROR(req_num, "Couldn't widhdraw with surfaceID : %d", curernt_sid);
1146 ret = WMError::NOT_REGISTERED;
1149 HMI_SEQ_INFO(req_num, "Additional split app %s, role: %s, area: %s",
1150 add_name.c_str(), add_role.c_str(), add_area.c_str());
1152 bool end_draw_finished = false;
1153 WMAction split_action{
1157 TaskVisible::VISIBLE,
1159 WMError ret = g_app_list.setAction(req_num, split_action);
1160 if (ret != WMError::SUCCESS)
1162 HMI_SEQ_ERROR(req_num, "Failed to set action");
1165 g_app_list.reqDump();
1170 HMI_SEQ_DEBUG(req_num, "split doesn't happen");
1173 // Set invisible task(Remove if policy manager finish)
1174 ret = this->setInvisibleTask(trigger.role, split);
1175 if(ret != WMError::SUCCESS)
1177 HMI_SEQ_ERROR(req_num, "Failed to set invisible task: %s", errorDescription(ret));
1181 /* get new status from Policy Manager */
1182 HMI_SEQ_NOTICE(req_num, "ATM, Policy manager does't exist, then set WMAction as is");
1183 if(trigger.role == "homescreen")
1185 // TODO : Remove when Policy Manager completed
1186 HMI_SEQ_NOTICE(req_num, "Hack. This process will be removed. Change HomeScreen code!!");
1187 req_area = "fullscreen";
1189 TaskVisible task_visible =
1190 (trigger.task == Task::TASK_ALLOCATE) ? TaskVisible::VISIBLE : TaskVisible::INVISIBLE;
1192 ret = g_app_list.setAction(req_num, trigger.appid, trigger.role, req_area, task_visible);
1193 g_app_list.reqDump();
1198 WMError WindowManager::startTransition(unsigned req_num)
1200 bool sync_draw_happen = false;
1202 WMError ret = WMError::SUCCESS;
1203 auto actions = g_app_list.getActions(req_num, &found);
1206 ret = WMError::NO_ENTRY;
1207 HMI_SEQ_ERROR(req_num,
1208 "Window Manager bug :%s : Action is not set", errorDescription(ret));
1212 for (const auto &action : actions)
1214 if (action.visible != TaskVisible::INVISIBLE)
1216 sync_draw_happen = true;
1218 // TODO: application requests by old role,
1219 // so convert role new to old for emitting event
1220 std::string old_role = this->rolenew2old[action.role];
1222 this->emit_syncdraw(old_role, action.area);
1223 /* TODO: emit event for app not subscriber
1224 if(g_app_list.contains(y.appid))
1225 g_app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
1229 if (sync_draw_happen)
1235 // deactivate only, no syncDraw
1236 // Make it deactivate here
1237 for (const auto &x : actions)
1239 if (g_app_list.contains(x.appid))
1241 auto client = g_app_list.lookUpClient(x.appid);
1242 this->deactivate(client->surfaceID(x.role));
1245 ret = NO_LAYOUT_CHANGE;
1250 WMError WindowManager::setInvisibleTask(const std::string &role, bool split)
1252 unsigned req_num = g_app_list.currentRequestNumber();
1253 HMI_SEQ_DEBUG(req_num, "set current visible app to invisible task");
1255 auto trigger = g_app_list.getRequest(req_num, &found);
1256 // I don't check found == true here because this is checked in caller.
1257 if(trigger.role == "homescreen")
1259 HMI_SEQ_INFO(req_num, "In case of 'homescreen' visible, don't change app to invisible");
1260 return WMError::SUCCESS;
1263 // This task is copied from original actiavete surface
1264 const char *drawing_name = this->rolenew2old[role].c_str();
1265 auto const &surface_id = this->lookup_id(role.c_str());
1266 auto layer_id = this->layers.get_layer_id(*surface_id);
1267 auto o_state = *this->layers.get_layout_state(*surface_id);
1268 struct LayoutState &state = *o_state;
1269 std::string add_name, add_role;
1270 std::string add_area = "";
1272 TaskVisible task_visible = TaskVisible::INVISIBLE;
1273 bool end_draw_finished = true;
1275 for (auto const &l : this->layers.mapping)
1277 if (l.second.layer_id <= *layer_id)
1281 HMI_DEBUG("wm", "debug: main %d , sub : %d", l.second.state.main, l.second.state.sub);
1282 if (l.second.state.main != -1)
1284 //this->deactivate(l.second.state.main);
1285 surface = l.second.state.main;
1286 add_role = *this->id_alloc.lookup(surface);
1287 add_name = g_app_list.getAppID(surface, add_role, &found);
1289 return WMError::NOT_REGISTERED;
1291 HMI_SEQ_INFO(req_num, "Invisible %s", add_name.c_str());
1292 WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
1293 g_app_list.setAction(req_num, act);
1294 l.second.state.main = -1;
1297 if (l.second.state.sub != -1)
1299 //this->deactivate(l.second.state.sub);
1300 surface = l.second.state.sub;
1301 add_role = *this->id_alloc.lookup(surface);
1302 add_name = g_app_list.getAppID(surface, add_role, &found);
1305 return WMError::NOT_REGISTERED;
1307 HMI_SEQ_INFO(req_num, "Invisible %s", add_name.c_str());
1308 WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
1309 g_app_list.setAction(req_num, act);
1310 l.second.state.sub = -1;
1314 // change current state here, but this is hack
1315 auto layer = this->layers.get_layer(*layer_id);
1317 if (state.main == -1)
1319 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
1323 if (0 != strcmp(drawing_name, "HomeScreen"))
1327 if (state.sub != *surface_id)
1329 if (state.sub != -1)
1331 //this->deactivate(state.sub);
1334 std::move(*this->id_alloc.lookup(state.sub));
1335 deact_sub.area = add_area;
1336 deact_sub.appid = g_app_list.getAppID(state.sub, deact_sub.role, &found);
1339 HMI_SEQ_ERROR(req_num, "App doesn't exist for role : %s",
1340 deact_sub.role.c_str());
1341 return WMError::NOT_REGISTERED;
1343 deact_sub.visible = task_visible;
1344 deact_sub.end_draw_finished = end_draw_finished;
1345 HMI_SEQ_DEBUG(req_num, "Set invisible task for %s", deact_sub.appid.c_str());
1346 g_app_list.setAction(req_num, deact_sub);
1349 //state = LayoutState{state.main, *surface_id};
1353 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
1355 //this->surface_set_layout(*surface_id);
1356 if (state.main != *surface_id)
1358 // this->deactivate(state.main);
1359 WMAction deact_main;
1360 deact_main.role = std::move(*this->id_alloc.lookup(state.main));
1362 deact_main.area = add_area;
1363 deact_main.appid = g_app_list.getAppID(state.main, deact_main.role, &found);
1366 HMI_SEQ_DEBUG(req_num, "sub surface ddoesn't exist");
1367 return WMError::NOT_REGISTERED;
1369 deact_main.visible = task_visible;
1370 deact_main.end_draw_finished = end_draw_finished;
1371 HMI_SEQ_DEBUG(req_num, "sub surface doesn't exist");
1372 g_app_list.setAction(req_num, deact_main);
1374 if (state.sub != -1)
1376 if (state.sub != *surface_id)
1378 //this->deactivate(state.sub);
1380 deact_sub.role = std::move(*this->id_alloc.lookup(state.sub));
1382 deact_sub.area = add_area;
1383 deact_sub.appid = g_app_list.getAppID(state.sub, deact_sub.role, &found);
1386 HMI_SEQ_DEBUG(req_num, "sub surface ddoesn't exist");
1387 return WMError::NOT_REGISTERED;
1389 deact_sub.visible = task_visible;
1390 deact_sub.end_draw_finished = end_draw_finished;
1391 HMI_SEQ_DEBUG(req_num, "sub surface doesn't exist");
1392 g_app_list.setAction(req_num, deact_sub);
1395 //state = LayoutState{*surface_id};
1399 return WMError::SUCCESS;
1402 WMError WindowManager::doEndDraw(unsigned req_num)
1406 auto actions = g_app_list.getActions(req_num, &found);
1407 WMError ret = WMError::SUCCESS;
1410 ret = WMError::NO_ENTRY;
1414 HMI_SEQ_INFO(req_num, "do endDraw");
1416 // layout change and make it visible
1417 for (const auto &act : actions)
1420 if(!g_app_list.contains(act.appid)){
1421 ret = WMError::NOT_REGISTERED;
1423 ret = this->layoutChange(act);
1424 if(ret != WMError::SUCCESS)
1426 HMI_SEQ_WARNING(req_num,
1427 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1430 ret = this->visibilityChange(act);
1431 if (ret != WMError::SUCCESS)
1433 HMI_SEQ_WARNING(req_num,
1434 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1437 HMI_SEQ_DEBUG(req_num, "visible %s", act.role.c_str());
1438 //this->lm_enddraw(act.role.c_str());
1440 this->layout_commit();
1442 // Change current state
1443 this->changeCurrentState(req_num);
1445 HMI_SEQ_INFO(req_num, "emit flushDraw");
1447 for(const auto &act_flush : actions)
1449 if(act_flush.visible != TaskVisible::INVISIBLE)
1451 // TODO: application requests by old role,
1452 // so convert role new to old for emitting event
1453 std::string old_role = this->rolenew2old[act_flush.role];
1455 this->emit_flushdraw(old_role.c_str());
1462 WMError WindowManager::layoutChange(const WMAction &action)
1464 if (action.visible == TaskVisible::INVISIBLE)
1466 // Visibility is not change -> no redraw is required
1467 return WMError::SUCCESS;
1469 auto client = g_app_list.lookUpClient(action.appid);
1470 unsigned surface = client->surfaceID(action.role);
1473 HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1474 "client doesn't have surface with role(%s)", action.role.c_str());
1475 return WMError::NOT_REGISTERED;
1478 WMError ret = this->setSurfaceSize(surface, action.area);
1482 WMError WindowManager::visibilityChange(const WMAction &action)
1484 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Change visibility");
1485 if(!g_app_list.contains(action.appid)){
1486 return WMError::NOT_REGISTERED;
1488 auto client = g_app_list.lookUpClient(action.appid);
1489 unsigned surface = client->surfaceID(action.role);
1492 HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1493 "client doesn't have surface with role(%s)", action.role.c_str());
1494 return WMError::NOT_REGISTERED;
1497 if (action.visible != TaskVisible::INVISIBLE)
1499 this->activate(surface); // Layout Manager task
1503 this->deactivate(surface); // Layout Manager task
1505 return WMError::SUCCESS;
1508 WMError WindowManager::setSurfaceSize(unsigned surface, const std::string &area)
1510 this->surface_set_layout(surface, area);
1512 return WMError::SUCCESS;
1515 WMError WindowManager::changeCurrentState(unsigned req_num)
1517 HMI_SEQ_DEBUG(req_num, "Change current layout state");
1518 bool trigger_found = false, action_found = false;
1519 auto trigger = g_app_list.getRequest(req_num, &trigger_found);
1520 auto actions = g_app_list.getActions(req_num, &action_found);
1521 if (!trigger_found || !action_found)
1523 HMI_SEQ_ERROR(req_num, "Action not found");
1524 return WMError::LAYOUT_CHANGE_FAIL;
1527 // Layout state reset
1528 struct LayoutState reset_state{-1, -1};
1529 HMI_SEQ_DEBUG(req_num,"Reset layout state");
1530 for (const auto &action : actions)
1532 if(!g_app_list.contains(action.appid)){
1533 return WMError::NOT_REGISTERED;
1535 auto client = g_app_list.lookUpClient(action.appid);
1536 auto pCurState = *this->layers.get_layout_state((int)client->surfaceID(action.role));
1537 if(pCurState == nullptr)
1539 HMI_SEQ_ERROR(req_num, "Counldn't find current status");
1542 pCurState->main = reset_state.main;
1543 pCurState->sub = reset_state.sub;
1546 HMI_SEQ_DEBUG(req_num, "Change state");
1547 for (const auto &action : actions)
1549 auto client = g_app_list.lookUpClient(action.appid);
1550 auto pLayerCurState = *this->layers.get_layout_state((int)client->surfaceID(action.role));
1551 if (pLayerCurState == nullptr)
1553 HMI_SEQ_ERROR(req_num, "Counldn't find current status");
1558 if (action.visible != TaskVisible::INVISIBLE)
1560 surface = (int)client->surfaceID(action.role);
1561 HMI_SEQ_INFO(req_num, "Change %s surface : %d, state visible area : %s",
1562 action.role.c_str(), surface, action.area.c_str());
1563 // visible == true -> layout changes
1564 if(action.area == "normal.full" || action.area == "split.main")
1566 pLayerCurState->main = surface;
1568 else if (action.area == "split.sub")
1570 pLayerCurState->sub = surface;
1575 pLayerCurState->main = surface;
1580 return WMError::SUCCESS;
1583 void WindowManager::emitScreenUpdated(unsigned req_num)
1586 HMI_SEQ_DEBUG(req_num, "emit screen updated");
1588 auto actions = g_app_list.getActions(req_num, &found);
1590 // create json object
1591 json_object *j = json_object_new_object();
1592 json_object *jarray = json_object_new_array();
1594 for(const auto& action: actions)
1596 if(action.visible != TaskVisible::INVISIBLE)
1598 json_object_array_add(jarray, json_object_new_string(action.appid.c_str()));
1601 json_object_object_add(j, kKeyIds, jarray);
1602 HMI_SEQ_INFO(req_num, "Visible app: %s", json_object_get_string(j));
1604 int ret = afb_event_push(
1605 this->map_afb_event[kListEventName[Event_ScreenUpdated]], j);
1608 HMI_DEBUG("wm", "afb_event_push failed: %m");
1612 void WindowManager::setTimer()
1615 if (clock_gettime(CLOCK_BOOTTIME, &ts) != 0) {
1616 HMI_ERROR("wm", "Could't set time (clock_gettime() returns with error");
1620 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Timer set activate");
1621 if (g_timer_ev_src == nullptr)
1623 // firsttime set into sd_event
1624 int ret = sd_event_add_time(afb_daemon_get_event_loop(), &g_timer_ev_src,
1625 CLOCK_BOOTTIME, (uint64_t)(ts.tv_sec + kTimeOut) * 1000000ULL, 1, processTimerHandler, this);
1628 HMI_ERROR("wm", "Could't set timer");
1633 // update timer limitation after second time
1634 sd_event_source_set_time(g_timer_ev_src, (uint64_t)(ts.tv_sec + kTimeOut) * 1000000ULL);
1635 sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_ONESHOT);
1639 void WindowManager::stopTimer()
1641 unsigned req_num = g_app_list.currentRequestNumber();
1642 HMI_SEQ_DEBUG(req_num, "Timer stop");
1643 int rc = sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_OFF);
1646 HMI_SEQ_ERROR(req_num, "Timer stop failed");
1650 void WindowManager::processNextRequest()
1653 g_app_list.reqDump();
1654 unsigned req_num = g_app_list.currentRequestNumber();
1655 if (g_app_list.haveRequest())
1657 HMI_SEQ_DEBUG(req_num, "Process next request");
1658 WMError rc = doTransition(req_num);
1659 if (rc != WMError::SUCCESS)
1661 HMI_SEQ_ERROR(req_num, errorDescription(rc));
1666 HMI_SEQ_DEBUG(req_num, "Nothing Request. Waiting Request");
1670 const char* WindowManager::convertRoleOldToNew(char const *old_role)
1672 const char *new_role = nullptr;
1674 for (auto const &on : this->roleold2new)
1676 std::regex regex = std::regex(on.first);
1677 if (std::regex_match(old_role, regex))
1679 // role is old. So convert to new.
1680 new_role = on.second.c_str();
1685 if (nullptr == new_role)
1687 // role is new or fallback.
1688 new_role = old_role;
1691 HMI_DEBUG("wm", "old:%s -> new:%s", old_role, new_role);
1696 int WindowManager::loadOldRoleDb()
1698 // Get afm application installed dir
1699 char const *afm_app_install_dir = getenv("AFM_APP_INSTALL_DIR");
1700 HMI_DEBUG("wm", "afm_app_install_dir:%s", afm_app_install_dir);
1702 std::string file_name;
1703 if (!afm_app_install_dir)
1705 HMI_ERROR("wm", "AFM_APP_INSTALL_DIR is not defined");
1709 file_name = std::string(afm_app_install_dir) + std::string("/etc/old_roles.db");
1713 json_object* json_obj;
1714 int ret = jh::inputJsonFilie(file_name.c_str(), &json_obj);
1717 HMI_ERROR("wm", "Could not open old_role.db, so use default old_role information");
1718 json_obj = json_tokener_parse(kDefaultOldRoleDb);
1720 HMI_DEBUG("wm", "json_obj dump:%s", json_object_get_string(json_obj));
1723 json_object* json_cfg;
1724 if (!json_object_object_get_ex(json_obj, "old_roles", &json_cfg))
1726 HMI_ERROR("wm", "Parse Error!!");
1730 int len = json_object_array_length(json_cfg);
1731 HMI_DEBUG("wm", "json_cfg len:%d", len);
1732 HMI_DEBUG("wm", "json_cfg dump:%s", json_object_get_string(json_cfg));
1734 for (int i=0; i<len; i++)
1736 json_object* json_tmp = json_object_array_get_idx(json_cfg, i);
1738 const char* old_role = jh::getStringFromJson(json_tmp, "name");
1739 if (nullptr == old_role)
1741 HMI_ERROR("wm", "Parse Error!!");
1745 const char* new_role = jh::getStringFromJson(json_tmp, "new");
1746 if (nullptr == new_role)
1748 HMI_ERROR("wm", "Parse Error!!");
1752 this->roleold2new[old_role] = std::string(new_role);
1756 for(auto itr = this->roleold2new.begin();
1757 itr != this->roleold2new.end(); ++itr)
1759 HMI_DEBUG("wm", ">>> role old:%s new:%s",
1760 itr->first.c_str(), itr->second.c_str());
1763 // Release json_object
1764 json_object_put(json_obj);
1769 const char *WindowManager::check_surface_exist(const char *drawing_name)
1771 auto const &surface_id = this->lookup_id(drawing_name);
1774 return "Surface does not exist";
1777 if (!this->controller->surface_exists(*surface_id))
1779 return "Surface does not exist in controller!";
1782 auto layer_id = this->layers.get_layer_id(*surface_id);
1786 return "Surface is not on any layer!";
1789 auto o_state = *this->layers.get_layout_state(*surface_id);
1791 if (o_state == nullptr)
1793 return "Could not find layer for surface";
1796 HMI_DEBUG("wm", "surface %d is detected", *surface_id);
1800 bool WindowManager::can_split(struct LayoutState const &state, int new_id)
1802 if (state.main != -1 && state.main != new_id)
1804 auto new_id_layer = this->layers.get_layer_id(new_id).value();
1805 auto current_id_layer = this->layers.get_layer_id(state.main).value();
1807 // surfaces are on separate layers, don't bother.
1808 if (new_id_layer != current_id_layer)
1813 std::string const &new_id_str = this->lookup_name(new_id).value();
1814 std::string const &cur_id_str = this->lookup_name(state.main).value();
1816 auto const &layer = this->layers.get_layer(new_id_layer);
1818 HMI_DEBUG("wm", "layer info name: %s", layer->name.c_str());
1820 if (layer->layouts.empty())
1825 for (auto i = layer->layouts.cbegin(); i != layer->layouts.cend(); i++)
1827 HMI_DEBUG("wm", "%d main_match '%s'", new_id_layer, i->main_match.c_str());
1828 auto rem = std::regex(i->main_match);
1829 if (std::regex_match(cur_id_str, rem))
1831 // build the second one only if the first already matched
1832 HMI_DEBUG("wm", "%d sub_match '%s'", new_id_layer, i->sub_match.c_str());
1833 auto res = std::regex(i->sub_match);
1834 if (std::regex_match(new_id_str, res))
1836 HMI_DEBUG("wm", "layout matched!");
1846 const char* WindowManager::kDefaultOldRoleDb = "{ \
1849 \"name\": \"HomeScreen\", \
1850 \"new\": \"homescreen\" \
1853 \"name\": \"Music\", \
1854 \"new\": \"music\" \
1857 \"name\": \"MediaPlayer\", \
1858 \"new\": \"music\" \
1861 \"name\": \"Video\", \
1862 \"new\": \"video\" \
1865 \"name\": \"VideoPlayer\", \
1866 \"new\": \"video\" \
1869 \"name\": \"WebBrowser\", \
1870 \"new\": \"browser\" \
1873 \"name\": \"Radio\", \
1874 \"new\": \"radio\" \
1877 \"name\": \"Phone\", \
1878 \"new\": \"phone\" \
1881 \"name\": \"Navigation\", \
1885 \"name\": \"HVAC\", \
1889 \"name\": \"Settings\", \
1890 \"new\": \"settings\" \
1893 \"name\": \"Dashboard\", \
1894 \"new\": \"dashboard\" \
1897 \"name\": \"POI\", \
1901 \"name\": \"Mixer\", \
1902 \"new\": \"mixer\" \
1905 \"name\": \"Restriction\", \
1906 \"new\": \"restriction\" \
1909 \"name\": \"^OnScreen.*\", \
1910 \"new\": \"on_screen\" \
1918 void controller_hooks::surface_created(uint32_t surface_id)
1920 this->wmgr->surface_created(surface_id);
1923 void controller_hooks::surface_removed(uint32_t surface_id)
1925 this->wmgr->surface_removed(surface_id);
1928 void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
1931 void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,
1937 void controller_hooks::surface_properties(uint32_t surface_id, uint32_t pid)
1939 this->wmgr->surface_properties(surface_id, pid);