2 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
20 #include "window_manager.hpp"
21 #include "json_helper.hpp"
22 #include "applist.hpp"
26 #include <systemd/sd-event.h>
35 static const uint64_t kTimeOut = 3ULL; /* 3s */
37 /* DrawingArea name used by "{layout}.{area}" */
38 const char kNameLayoutNormal[] = "normal";
39 const char kNameLayoutSplit[] = "split";
40 const char kNameAreaFull[] = "full";
41 const char kNameAreaMain[] = "main";
42 const char kNameAreaSub[] = "sub";
44 /* Key for json obejct */
45 const char kKeyDrawingName[] = "drawing_name";
46 const char kKeyDrawingArea[] = "drawing_area";
47 const char kKeyDrawingRect[] = "drawing_rect";
48 const char kKeyX[] = "x";
49 const char kKeyY[] = "y";
50 const char kKeyWidth[] = "width";
51 const char kKeyHeight[] = "height";
52 const char kKeyWidthPixel[] = "width_pixel";
53 const char kKeyHeightPixel[] = "height_pixel";
54 const char kKeyWidthMm[] = "width_mm";
55 const char kKeyHeightMm[] = "height_mm";
56 const char kKeyScale[] = "scale";
57 const char kKeyIds[] = "ids";
59 static sd_event_source *g_timer_ev_src = nullptr;
60 static AppList g_app_list;
61 static WindowManager *g_context;
66 // using nlohmann::json;
68 /* result<json> file_to_json(char const *filename)
71 std::ifstream i(filename);
74 HMI_DEBUG("Could not open config file, so use default layer information");
75 j = default_layers_json;
85 struct result<layer_map> load_layer_map(char const *filename)
87 HMI_DEBUG("loading IDs from %s", filename);
89 auto j = file_to_json(filename);
92 return Err<layer_map>(j.unwrap_err());
94 json jids = j.unwrap();
96 return to_layer_map(jids);
99 static int processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
101 HMI_NOTICE("Time out occurs because the client replys endDraw slow, so revert the request");
102 reinterpret_cast<wm::WindowManager *>(userdata)->timerHandler();
106 static void onStateTransitioned(vector<WMAction> actions)
108 g_context->startTransitionWrapper(actions);
111 static void onError()
113 g_context->processError(WMError::LAYOUT_CHANGE_FAIL);
120 WindowManager::WindowManager()
124 const char *path = getenv("AFM_APP_INSTALL_DIR");
127 HMI_ERROR("AFM_APP_INSTALL_DIR is not defined");
131 this->lc = std::make_shared<LayerControl>(root);
133 HMI_DEBUG("Layer Controller initialized");
138 auto l = load_layer_map(path.c_str());
141 this->layers = l.unwrap();
145 HMI_ERROR("%s", l.err().value());
149 catch (std::exception &e)
151 HMI_ERROR("Loading of configuration failed: %s", e.what());
155 int WindowManager::init()
157 /* if (!this->display->ok())
162 if (this->layers.mapping.empty())
164 HMI_ERROR("No surface -> layer mapping loaded");
168 // TODO: application requests by old role,
169 // so create role map (old, new)
171 LayerControlCallbacks lmcb;
172 lmcb.surfaceCreated = [&](unsigned pid, unsigned surface){
173 this->surface_created(surface);
175 lmcb.surfaceDestroyed = [&](unsigned surface){
176 this->surface_removed(surface);
178 this->lc->init(lmcb);
179 this->loadOldRoleDb();
181 // Store my context for calling callback from PolicyManager
184 // Initialize PMWrapper
185 this->pmw.initialize();
187 // Register callback to PolicyManager
188 this->pmw.registerCallback(onStateTransitioned, onError);
191 for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
193 map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
196 const struct rect css_bg = this->lc->getAreaSize("fullscreen");
197 Screen screen = this->lc->getScreenInfo();
198 rectangle dp_bg(screen.width(), screen.height());
200 dp_bg.set_aspect(static_cast<double>(css_bg.w) / css_bg.h);
201 dp_bg.fit(screen.width(), screen.height());
202 dp_bg.center(screen.width(), screen.height());
203 HMI_DEBUG("SCALING: CSS BG(%dx%d) -> DDP %dx%d,(%dx%d)",
204 css_bg.w, css_bg.h, dp_bg.left(), dp_bg.top(), dp_bg.width(), dp_bg.height());
206 double scale = static_cast<double>(dp_bg.height()) / css_bg.h;
207 this->lc->setupArea(dp_bg, scale);
209 /* this->display->add_global_handler(
210 "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
211 this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
214 this->display->add_global_handler(
215 "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
217 std::make_unique<struct compositor::controller>(r, name, v);
219 // Init controller hooks
220 this->controller->chooks = &this->chooks;
222 // This protocol needs the output, so lets just add our mapping here...
223 this->controller->add_proxy_to_id_mapping(
224 this->outputs.front()->proxy.get(),
225 wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
226 this->outputs.front()->proxy.get())));
229 this->controller->create_screen(this->outputs.front()->proxy.get());
231 // Set display to controller
232 this->controller->display = this->display;
235 // First level objects
236 this->display->roundtrip();
237 // Second level objects
238 this->display->roundtrip();
239 // Third level objects
240 this->display->roundtrip(); */
242 return 0; //init_layers();
245 /* int WindowManager::dispatch_pending_events()
247 if (this->pop_pending_events())
249 this->display->dispatch_pending();
255 void WindowManager::set_pending_events()
257 this->pending_events.store(true, std::memory_order_release);
260 result<int> WindowManager::api_request_surface(char const *appid, char const *drawing_name)
262 // TODO: application requests by old role,
263 // so convert role old to new
264 const char *role = this->convertRoleOldToNew(drawing_name);
266 string s_appid = appid;
267 string s_role = role;
269 if(!g_app_list.contains(s_appid))
271 // auto lid = this->layers.get_layer_id(string(role));
272 unsigned l_id = this->lc->getNewLayerID(s_role, &l_name);
276 * register drawing_name as fallback and make it displayed.
278 // lid = this->layers.get_layer_id(string("fallback"));
279 l_id = this->lc->getNewLayerID("fallback", &l_name);
280 HMI_DEBUG("%s is not registered in layers.json, then fallback as normal app", role);
283 return Err<int>("Designated role does not match any role, fallback is disabled");
286 this->lc->createNewLayer(l_id);
287 // add client into the db
288 g_app_list.addClient(s_appid, l_id, s_role);
291 // generate surface ID for ivi-shell application
293 auto rname = this->id_alloc.lookup(string(role));
296 // name does not exist yet, allocate surface id...
297 auto id = int(this->id_alloc.generate_id(role));
298 this->tmp_surface2app[id] = s_appid;
300 // this->layers.add_surface(id, *lid);
302 // set the main_surface[_name] here and now
303 // if (!this->layers.main_surface_name.empty() &&
304 // this->layers.main_surface_name == drawing_name)
306 // this->layers.main_surface = id;
307 // HMI_DEBUG("Set main_surface id to %u", id);
312 /* if(g_app_list.contains(appid_str))
314 // add surface into app
315 auto client = g_app_list.lookUpClient(appid_str);
316 // client.addSurface(id);
320 g_app_list.addClient(appid_str, l_id, id, string(role));
323 // Set role map of (new, old)
324 this->rolenew2old[role] = string(drawing_name);
329 // Check currently registered drawing names if it is already there.
330 return Err<int>("Surface already present");
333 char const *WindowManager::api_request_surface(char const *appid, char const *drawing_name,
336 // TODO: application requests by old role,
337 // so convert role old to new
338 const char *role = this->convertRoleOldToNew(drawing_name);
342 // auto lid = this->layers.get_layer_id(string(role));
343 unsigned lid = this->lc->getNewLayerID(str, &l_name);
344 unsigned sid = std::stol(ivi_id);
348 //register drawing_name as fallback and make it displayed.
349 lid = this->lc->getNewLayerID(str, &l_name);
350 HMI_DEBUG("%s is not registered in layers.json, then fallback as normal app", role);
353 return "Drawing name does not match any role, fallback is disabled";
357 this->lc->createNewLayer(lid);
359 auto rname = this->id_alloc.lookup(str);
363 return "Surface already present";
366 // register pair drawing_name and ivi_id
367 this->id_alloc.register_name_id(role, sid);
368 // this->layers.add_surface(sid, *lid);
370 // this surface is already created
371 // HMI_DEBUG("surface_id is %u, layer_id is %u", sid, *lid);
373 // this->controller->layers[*lid]->add_surface(sid);
374 // this->layout_commit();
376 // add client into the db
377 string appid_str(appid);
378 g_app_list.addClient(appid_str, lid, string(role));
380 // Set role map of (new, old)
381 this->rolenew2old[role] = string(drawing_name);
387 * This function is substitute of requestSurface
388 * If surface creation is faster than application request of this function,
389 * WM will bind surfaceID with application and role.
390 * If surface creation is slower than application request of thie function,
391 * WM will put Client into pending list.
394 * Application can request with pid but this is temporary solution for now.
395 * This will be removed.
397 bool WindowManager::api_set_role(char const *appid, char const *drawing_name, unsigned pid){
399 string role = drawing_name;
401 unsigned surface = 0;
402 WMError wm_err = WMError::UNKNOWN;
405 // get layer ID which role should be in
406 // auto lid = this->layers.get_layer_id(role);
407 unsigned lid = this->lc->getNewLayerID(role, &l_name);
410 // lid = this->layers.get_layer_id(string("fallback"));
411 HMI_DEBUG("%s is not registered in layers.json, then fallback as normal app", role.c_str());
414 HMI_ERROR("Drawing name does not match any role, fallback is disabled");
420 // search floating surfaceID from pid if pid is designated.
421 wm_err = g_app_list.popFloatingSurface(pid, &surface);
424 // get floating surface with appid. If WM queries appid from pid,
425 // WM can bind surface and role with appid(not implemented yet)
426 //wm_err = g_app_list.popFloatingSurface(id);
428 if(wm_err != WMError::SUCCESS){
429 HMI_ERROR("No floating surface for app: %s", id.c_str());
430 g_app_list.addFloatingClient(id, lid, role);
431 HMI_NOTICE("%s : Waiting for surface creation", id.c_str());
436 if (g_app_list.contains(id))
438 HMI_INFO("Add role: %s with surface: %d. Client %s has multi surfaces.",
439 role.c_str(), surface, id.c_str());
440 auto client = g_app_list.lookUpClient(id);
441 client->appendRole(role);
444 HMI_INFO("Create new client: %s, surface: %d into layer: %d with role: %s",
445 id.c_str(), surface, lid, role.c_str());
446 g_app_list.addClient(id, lid, role);
449 // register pair drawing_name and ivi_id
450 this->id_alloc.register_name_id(role.c_str(), surface);
451 // this->layers.add_surface(surface, *lid);
453 // this surface is already created
454 HMI_DEBUG("surface_id is %u, layer_id is %u", surface, lid);
456 // const auto &o_layer = this->layers.get_layer(*lid);
457 /* auto rect = o_layer.value().rect;
460 rect.w = this->controller->output_size.w + 1 + rect.w;
464 rect.h = this->controller->output_size.h + 1 + rect.h;
467 // this->controller->layers[*lid]->add_surface(surface);
468 // this->layout_commit();
473 void WindowManager::api_activate_surface(char const *appid, char const *drawing_name,
474 char const *drawing_area, const reply_func &reply)
478 // TODO: application requests by old role,
479 // so convert role old to new
480 const char *c_role = this->convertRoleOldToNew(drawing_name);
483 string role = c_role;
484 string area = drawing_area;
486 if(!g_app_list.contains(id))
488 reply("app doesn't request 'requestSurface' or 'setRole' yet");
491 auto client = g_app_list.lookUpClient(id);
493 // unsigned srfc = client->surfaceID(role);
494 // unsigned layer = client->layerID();
496 // g_app_list.removeFloatingSurface(client->surfaceID());
497 // g_app_list.removeFloatingSurface(client);
499 Task task = Task::TASK_ALLOCATE;
500 unsigned req_num = 0;
501 WMError ret = WMError::UNKNOWN;
503 ret = this->setRequest(id, role, area, task, &req_num);
505 //vector<WMLayerState> current_states = this->lc->getCurrentStates();
506 // ret = this->setRequest(id, role, area, task, current_states, &req_num);
508 if(ret != WMError::SUCCESS)
510 HMI_ERROR(errorDescription(ret));
511 reply("Failed to set request");
516 if (req_num != g_app_list.currentRequestNumber())
518 // Add request, then invoked after the previous task is finished
519 HMI_SEQ_DEBUG(req_num, "request is accepted");
526 ret = this->checkPolicy(req_num);
528 if (ret != WMError::SUCCESS)
531 HMI_SEQ_ERROR(req_num, errorDescription(ret));
532 g_app_list.removeRequest(req_num);
533 this->processNextRequest();
537 void WindowManager::api_deactivate_surface(char const *appid, char const *drawing_name,
538 const reply_func &reply)
542 // TODO: application requests by old role,
543 // so convert role old to new
544 const char *c_role = this->convertRoleOldToNew(drawing_name);
550 string role = c_role;
551 string area = ""; //drawing_area;
552 Task task = Task::TASK_RELEASE;
553 unsigned req_num = 0;
554 WMError ret = WMError::UNKNOWN;
556 ret = this->setRequest(id, role, area, task, &req_num);
557 //vector<WMLayerState> current_states = this->lc->getCurrentStates();
558 // ret = this->setRequest(id, role, area, task, current_states, &req_num);
560 if (ret != WMError::SUCCESS)
562 HMI_ERROR(errorDescription(ret));
563 reply("Failed to set request");
568 if (req_num != g_app_list.currentRequestNumber())
570 // Add request, then invoked after the previous task is finished
571 HMI_SEQ_DEBUG(req_num, "request is accepted");
578 ret = this->checkPolicy(req_num);
580 if (ret != WMError::SUCCESS)
583 HMI_SEQ_ERROR(req_num, errorDescription(ret));
584 g_app_list.removeRequest(req_num);
585 this->processNextRequest();
589 void WindowManager::api_enddraw(char const *appid, char const *drawing_name)
591 // TODO: application requests by old role,
592 // so convert role old to new
593 const char *c_role = this->convertRoleOldToNew(drawing_name);
596 string role = c_role;
597 unsigned current_req = g_app_list.currentRequestNumber();
598 bool result = g_app_list.setEndDrawFinished(current_req, id, role);
602 HMI_ERROR("%s is not in transition state", id.c_str());
606 if (g_app_list.endDrawFullfilled(current_req))
608 // do task for endDraw
610 WMError ret = this->doEndDraw(current_req);
612 if(ret != WMError::SUCCESS)
614 //this->emit_error();
616 // Undo state of PolicyManager
617 this->pmw.undoState();
618 this->lc->undoUpdate();
620 this->emitScreenUpdated(current_req);
621 HMI_SEQ_INFO(current_req, "Finish request status: %s", errorDescription(ret));
623 g_app_list.removeRequest(current_req);
625 this->processNextRequest();
629 HMI_SEQ_INFO(current_req, "Wait other App call endDraw");
634 result<json_object *> WindowManager::api_get_display_info()
636 /* if (!this->display->ok())
638 return Err<json_object *>("Wayland compositor is not available");
642 /* size o_size = this->controller->output_size;
643 size p_size = this->controller->physical_size; */
644 Screen screen = this->lc->getScreenInfo();
646 json_object *object = json_object_new_object();
647 json_object_object_add(object, kKeyWidthPixel, json_object_new_int(screen.width()));
648 json_object_object_add(object, kKeyHeightPixel, json_object_new_int(screen.height()));
650 json_object_object_add(object, kKeyWidthMm, json_object_new_int(0));
651 json_object_object_add(object, kKeyHeightMm, json_object_new_int(0));
652 json_object_object_add(object, kKeyScale, json_object_new_double(this->lc->scale()));
654 return Ok<json_object *>(object);
657 result<json_object *> WindowManager::api_get_area_info(char const *drawing_name)
661 // TODO: application requests by old role,
662 // so convert role old to new
663 const char *role = this->convertRoleOldToNew(drawing_name);
665 // Check drawing name, surface/layer id
666 auto const &surface_id = this->id_alloc.lookup(string(role));
669 return Err<json_object *>("Surface does not exist");
672 /* if (!this->controller->surface_exists(*surface_id))
674 return Err<json_object *>("Surface does not exist in controller!");
677 /* // auto layer_id = this->layers.get_layer_id(*surface_id);
680 return Err<json_object *>("Surface is not on any layer!");
683 // Set area rectangle
684 rect area_info = this->area_info[*surface_id];
685 json_object *object = json_object_new_object();
686 json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
687 json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
688 json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
689 json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));
691 return Ok<json_object *>(object);
694 void WindowManager::api_ping() { /* this->dispatch_pending_events(); */ }
696 void WindowManager::send_event(char const *evname, char const *label)
698 HMI_DEBUG("%s: %s(%s)", __func__, evname, label);
700 json_object *j = json_object_new_object();
701 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
703 int ret = afb_event_push(this->map_afb_event[evname], j);
706 HMI_DEBUG("afb_event_push failed: %m");
710 void WindowManager::send_event(char const *evname, char const *label, char const *area,
711 int x, int y, int w, int h)
713 HMI_DEBUG("%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
714 __func__, evname, label, area, x, y, w, h);
716 json_object *j_rect = json_object_new_object();
717 json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
718 json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
719 json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
720 json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));
722 json_object *j = json_object_new_object();
723 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
724 json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
725 json_object_object_add(j, kKeyDrawingRect, j_rect);
727 int ret = afb_event_push(this->map_afb_event[evname], j);
730 HMI_DEBUG("afb_event_push failed: %m");
737 void WindowManager::surface_created(uint32_t surface_id)
739 if(this->tmp_surface2app.count(surface_id) != 0)
741 string appid = this->tmp_surface2app[surface_id];
742 this->tmp_surface2app.erase(surface_id);
743 if(g_app_list.contains(appid))
745 auto client = g_app_list.lookUpClient(appid);
746 WMError ret = client->addSurface(surface_id);
747 HMI_INFO("Add surface %d to \"%s\"", surface_id, appid.c_str());
748 if(ret != WMError::SUCCESS)
750 HMI_ERROR("Failed to add surface to client %s", client->appID().c_str());
756 HMI_NOTICE("Unknown surface %d", surface_id);
758 /* this->controller->get_surface_properties(surface_id, IVI_WM_PARAM_SIZE);
760 auto layer_id = this->layers.get_layer_id(surface_id);
763 HMI_DEBUG("Newly created surfce %d is not associated with any layer!",
768 HMI_DEBUG("surface_id is %u, layer_id is %u", surface_id, *layer_id);
770 this->controller->layers[*layer_id]->add_surface(surface_id);
771 this->layout_commit(); */
774 void WindowManager::surface_removed(uint32_t surface_id)
776 HMI_DEBUG("Delete surface_id %u", surface_id);
777 this->id_alloc.remove_id(surface_id);
778 // this->layers.remove_surface(surface_id);
779 g_app_list.removeSurface(surface_id);
782 void WindowManager::surface_properties(unsigned surface_id, unsigned pid)
784 HMI_DEBUG("get surface properties");
786 // search pid from surfaceID
787 /*json_object *response;
788 afb_service_call_sync("afm-main", "runners", nullptr, &response);
790 // retrieve appid from pid from application manager
792 if(response == nullptr)
794 HMI_ERROR("No runners");
798 // check appid then add it to the client
799 HMI_INFO("Runners:%s", json_object_get_string(response));
800 int size = json_object_array_length(response);
801 for(int i = 0; i < size; i++)
803 json_object *j = json_object_array_get_idx(response, i);
804 const char* id = jh::getStringFromJson(j, "id");
805 int runid = jh::getIntFromJson(j, "runid");
806 if(id && (runid > 0))
816 json_object_put(response);
818 g_app_list.addFloatingSurface(appid, surface_id, pid);*/
821 void WindowManager::removeClient(const string &appid)
823 HMI_DEBUG("Remove clinet %s from list", appid.c_str());
824 g_app_list.removeClient(appid);
827 void WindowManager::exceptionProcessForTransition()
829 unsigned req_num = g_app_list.currentRequestNumber();
830 HMI_SEQ_NOTICE(req_num, "Process exception handling for request. Remove current request %d", req_num);
831 g_app_list.removeRequest(req_num);
832 HMI_SEQ_NOTICE(g_app_list.currentRequestNumber(), "Process next request if exists");
833 this->processNextRequest();
836 void WindowManager::timerHandler()
838 unsigned req_num = g_app_list.currentRequestNumber();
839 HMI_SEQ_DEBUG(req_num, "Timer expired remove Request");
840 g_app_list.reqDump();
841 g_app_list.removeRequest(req_num);
842 this->processNextRequest();
845 void WindowManager::startTransitionWrapper(vector<WMAction> &actions)
848 // req_num is guaranteed by Window Manager
849 unsigned req_num = g_app_list.currentRequestNumber();
853 if (g_app_list.haveRequest())
855 HMI_SEQ_DEBUG(req_num, "There is no WMAction for this request");
856 goto proc_remove_request;
860 HMI_SEQ_DEBUG(req_num, "There is no request");
865 for (auto &act : actions)
870 auto const &surface_id = this->id_alloc.lookup(act.role.c_str());
871 if(surface_id == nullopt)
873 goto proc_remove_request;
875 std::string appid = g_app_list.getAppID(*surface_id, &found);
878 if (TaskVisible::INVISIBLE == act.visible)
880 // App is killed, so do not set this action
885 HMI_SEQ_ERROR(req_num, "appid which is visible is not found");
890 auto client = g_app_list.lookUpClient(appid);
891 act.req_num = req_num;
895 ret = g_app_list.setAction(req_num, act);
896 if (ret != WMError::SUCCESS)
898 HMI_SEQ_ERROR(req_num, "Setting action is failed");
903 HMI_SEQ_DEBUG(req_num, "Start transition.");
904 ret = this->startTransition(req_num);
905 if (ret != WMError::SUCCESS)
907 if (ret == WMError::NO_LAYOUT_CHANGE)
909 goto proc_remove_request;
913 HMI_SEQ_ERROR(req_num, "Transition state is failed");
922 HMI_SEQ_ERROR(req_num, errorDescription(ret));
923 this->pmw.undoState();
926 g_app_list.removeRequest(req_num);
927 this->processNextRequest();
930 void WindowManager::processError(WMError error)
932 unsigned req_num = g_app_list.currentRequestNumber();
935 HMI_SEQ_ERROR(req_num, errorDescription(error));
936 g_app_list.removeRequest(req_num);
937 this->processNextRequest();
941 ******* Private Functions *******
947 int WindowManager::init_layers()
949 /* if (!this->controller)
951 HMI_ERROR("ivi_controller global not available");
955 if (this->outputs.empty())
957 HMI_ERROR("no output was set up!");
961 auto &c = this->controller;
963 auto &o = this->outputs.front();
964 auto &s = c->screens.begin()->second;
965 auto &layers = c->layers;
967 // Write output dimensions to ivi controller...
968 c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
969 c->physical_size = compositor::size{uint32_t(o->physical_width),
970 uint32_t(o->physical_height)};
973 HMI_DEBUG("SCALING: screen (%dx%d), physical (%dx%d)",
974 o->width, o->height, o->physical_width, o->physical_height);
976 // this->layers.loadAreaDb();
978 const compositor::rect css_bg = this->layers.getAreaSize("fullscreen");
979 rectangle dp_bg(o->width, o->height);
981 dp_bg.set_aspect(static_cast<double>(css_bg.w) / css_bg.h);
982 dp_bg.fit(o->width, o->height);
983 dp_bg.center(o->width, o->height);
984 HMI_DEBUG("SCALING: CSS BG(%dx%d) -> DDP %dx%d,(%dx%d)",
985 css_bg.w, css_bg.h, dp_bg.left(), dp_bg.top(), dp_bg.width(), dp_bg.height());
993 // Quick and dirty setup of layers
994 for (auto const &i : this->layers.mapping)
996 c->layer_create(i.second.layer_id, dp_bg.width(), dp_bg.height());
997 auto &l = layers[i.second.layer_id];
998 l->set_destination_rectangle(dp_bg.left(), dp_bg.top(), dp_bg.width(), dp_bg.height());
999 l->set_visibility(1);
1000 HMI_DEBUG("Setting up layer %s (%d) for surface role match \"%s\"",
1001 i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
1004 // Add layers to screen
1005 s->set_render_order(this->layers.layers);
1007 this->layout_commit();
1009 c->scale = static_cast<double>(dp_bg.height()) / css_bg.h;
1010 this->layers.setupArea(c->scale);
1015 void WindowManager::surface_set_layout(int surface_id, const string& area)
1017 /* if (!this->controller->surface_exists(surface_id))
1019 HMI_ERROR("Surface %d does not exist", surface_id);
1023 auto o_layer_id = this->layers.get_layer_id(surface_id);
1027 HMI_ERROR("Surface %d is not associated with any layer!", surface_id);
1031 uint32_t layer_id = *o_layer_id;
1033 auto const &layer = this->layers.get_layer(layer_id);
1034 auto rect = this->layers.getAreaSize(area);
1035 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "%s : x:%d y:%d w:%d h:%d", area.c_str(),
1036 rect.x, rect.y, rect.w, rect.h);
1037 auto &s = this->controller->surfaces[surface_id];
1044 HMI_DEBUG("surface_set_layout for surface %u on layer %u", surface_id,
1047 // set destination to the display rectangle
1048 s->set_destination_rectangle(x, y, w, h);
1050 // update area information
1051 this->area_info[surface_id].x = x;
1052 this->area_info[surface_id].y = y;
1053 this->area_info[surface_id].w = w;
1054 this->area_info[surface_id].h = h;
1056 HMI_DEBUG("Surface %u now on layer %u with rect { %d, %d, %d, %d }",
1057 surface_id, layer_id, x, y, w, h); */
1060 void WindowManager::layout_commit()
1062 /* this->controller->commit_changes();
1063 this->display->flush(); */
1066 void WindowManager::emit_activated(char const *label)
1068 this->send_event(kListEventName[Event_Active], label);
1071 void WindowManager::emit_deactivated(char const *label)
1073 this->send_event(kListEventName[Event_Inactive], label);
1076 void WindowManager::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
1078 this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
1081 void WindowManager::emit_syncdraw(const string &role, const string &area)
1083 rect rect = this->lc->getAreaSize(area);
1084 this->send_event(kListEventName[Event_SyncDraw],
1085 role.c_str(), area.c_str(), rect.x, rect.y, rect.w, rect.h);
1088 void WindowManager::emit_flushdraw(char const *label)
1090 this->send_event(kListEventName[Event_FlushDraw], label);
1093 void WindowManager::emit_visible(char const *label, bool is_visible)
1095 this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
1098 void WindowManager::emit_invisible(char const *label)
1100 return emit_visible(label, false);
1103 void WindowManager::emit_visible(char const *label) { return emit_visible(label, true); }
1105 void WindowManager::activate(int id)
1107 /* auto ip = this->controller->sprops.find(id);
1108 if (ip != this->controller->sprops.end())
1110 this->controller->surfaces[id]->set_visibility(1);
1113 this->id_alloc.lookup(id).value_or("unknown-name").c_str();
1115 /* // FOR CES DEMO >>>
1116 if ((0 == strcmp(label, "radio")) ||
1117 (0 == strcmp(label, "music")) ||
1118 (0 == strcmp(label, "video")) ||
1119 (0 == strcmp(label, "map")))
1121 for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
1126 this->surface_bg.erase(i);
1128 // Remove from BG layer (999)
1129 HMI_DEBUG("Remove %s(%d) from BG layer", label, id);
1130 this->controller->layers[999]->remove_surface(id);
1132 // Add to FG layer (1001)
1133 HMI_DEBUG("Add %s(%d) to FG layer", label, id);
1134 this->controller->layers[1001]->add_surface(id);
1136 for (int j : this->surface_bg)
1138 HMI_DEBUG("Stored id:%d", j);
1146 this->layout_commit(); */
1148 // TODO: application requests by old role,
1149 // so convert role new to old for emitting event
1150 const char* old_role = this->rolenew2old[label].c_str();
1152 this->emit_visible(old_role);
1153 this->emit_activated(old_role);
1157 void WindowManager::deactivate(int id)
1159 /* auto ip = this->controller->sprops.find(id);
1160 if (ip != this->controller->sprops.end())
1163 this->id_alloc.lookup(id).value_or("unknown-name").c_str();
1165 /*// FOR CES DEMO >>>
1166 if ((0 == strcmp(label, "radio")) ||
1167 (0 == strcmp(label, "music")) ||
1168 (0 == strcmp(label, "video")) ||
1169 (0 == strcmp(label, "map")))
1173 this->surface_bg.push_back(id);
1175 // Remove from FG layer (1001)
1176 HMI_DEBUG("Remove %s(%d) from FG layer", label, id);
1177 this->controller->layers[1001]->remove_surface(id);
1179 // Add to BG layer (999)
1180 HMI_DEBUG("Add %s(%d) to BG layer", label, id);
1181 this->controller->layers[999]->add_surface(id);
1183 for (int j : surface_bg)
1185 HMI_DEBUG("Stored id:%d", j);
1190 this->controller->surfaces[id]->set_visibility(0);
1194 this->layout_commit(); */
1196 // TODO: application requests by old role,
1197 // so convert role new to old for emitting event
1198 const char* old_role = this->rolenew2old[label].c_str();
1200 this->emit_deactivated(old_role);
1201 this->emit_invisible(old_role);
1205 WMError WindowManager::setRequest(const string& appid, const string &role, const string &area,
1206 Task task, unsigned* req_num)
1208 if (!g_app_list.contains(appid))
1210 return WMError::NOT_REGISTERED;
1213 auto client = g_app_list.lookUpClient(appid);
1218 unsigned current = g_app_list.currentRequestNumber();
1219 unsigned requested_num = g_app_list.getRequestNumber(appid);
1220 if (requested_num != 0)
1222 HMI_SEQ_INFO(requested_num,
1223 "%s %s %s request is already queued", appid.c_str(), role.c_str(), area.c_str());
1224 return REQ_REJECTED;
1227 WMRequest req = WMRequest(appid, role, area, task);
1228 unsigned new_req = g_app_list.addRequest(req);
1230 g_app_list.reqDump();
1232 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", appid.c_str(), role.c_str(), area.c_str());
1234 return WMError::SUCCESS;
1237 WMError WindowManager::checkPolicy(unsigned req_num)
1242 // get current trigger
1244 WMError ret = WMError::LAYOUT_CHANGE_FAIL;
1245 auto trigger = g_app_list.getRequest(req_num, &found);
1248 ret = WMError::NO_ENTRY;
1251 string req_area = trigger.area;
1253 if (trigger.task == Task::TASK_ALLOCATE)
1255 const char *msg = this->check_surface_exist(trigger.role.c_str());
1259 HMI_SEQ_ERROR(req_num, msg);
1264 // Input event data to PolicyManager
1265 if (0 > this->pmw.setInputEventData(trigger.task, trigger.role, trigger.area))
1267 HMI_SEQ_ERROR(req_num, "Failed to set input event data to PolicyManager");
1271 // Execute state transition of PolicyManager
1272 if (0 > this->pmw.executeStateTransition())
1274 HMI_SEQ_ERROR(req_num, "Failed to execute state transition of PolicyManager");
1278 ret = WMError::SUCCESS;
1280 g_app_list.reqDump();
1285 WMError WindowManager::startTransition(unsigned req_num)
1287 bool sync_draw_happen = false;
1289 WMError ret = WMError::SUCCESS;
1290 auto actions = g_app_list.getActions(req_num, &found);
1293 ret = WMError::NO_ENTRY;
1294 HMI_SEQ_ERROR(req_num,
1295 "Window Manager bug :%s : Action is not set", errorDescription(ret));
1299 g_app_list.reqDump();
1300 for (const auto &action : actions)
1302 if (action.visible == TaskVisible::VISIBLE)
1304 sync_draw_happen = true;
1306 // TODO: application requests by old role,
1307 // so convert role new to old for emitting event
1308 string old_role = this->rolenew2old[action.role];
1310 this->emit_syncdraw(old_role, action.area);
1311 /* TODO: emit event for app not subscriber
1312 if(g_app_list.contains(y.appid))
1313 g_app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
1317 if (sync_draw_happen)
1323 // deactivate only, no syncDraw
1324 // Make it deactivate here
1325 for (const auto &x : actions)
1327 this->lc->visibilityChange(x);
1328 /* if (g_app_list.contains(x.appid))
1330 auto client = g_app_list.lookUpClient(x.appid);
1331 //this->deactivate(client->surfaceID(x.role));
1334 this->lc->renderLayers();
1335 ret = WMError::NO_LAYOUT_CHANGE;
1340 WMError WindowManager::doEndDraw(unsigned req_num)
1344 auto actions = g_app_list.getActions(req_num, &found);
1345 WMError ret = WMError::SUCCESS;
1348 ret = WMError::NO_ENTRY;
1352 HMI_SEQ_INFO(req_num, "do endDraw");
1354 // layout change and make it visible
1355 for (const auto &act : actions)
1357 if(act.visible != TaskVisible::NO_CHANGE)
1360 ret = this->lc->layoutChange(act);
1361 if(ret != WMError::SUCCESS)
1363 HMI_SEQ_WARNING(req_num,
1364 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1367 ret = this->lc->visibilityChange(act);
1368 if (ret != WMError::SUCCESS)
1370 HMI_SEQ_WARNING(req_num,
1371 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1374 HMI_SEQ_DEBUG(req_num, "visible %s", act.role.c_str());
1375 //this->lc_enddraw(act.role.c_str());
1378 this->lc->renderLayers();
1380 HMI_SEQ_INFO(req_num, "emit flushDraw");
1382 for(const auto &act_flush : actions)
1384 if(act_flush.visible == TaskVisible::VISIBLE)
1386 // TODO: application requests by old role,
1387 // so convert role new to old for emitting event
1388 string old_role = this->rolenew2old[act_flush.role];
1390 this->emit_flushdraw(old_role.c_str());
1397 WMError WindowManager::layoutChange(const WMAction &action)
1399 if (action.visible == TaskVisible::INVISIBLE)
1401 // Visibility is not change -> no redraw is required
1402 return WMError::SUCCESS;
1404 WMError ret = this->lc->layoutChange(action);
1405 /* auto client = g_app_list.lookUpClient(action.appid);
1406 unsigned surface = client->surfaceID(action.role);
1409 HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1410 "client doesn't have surface with role(%s)", action.role.c_str());
1411 return WMError::NOT_REGISTERED;
1414 WMError ret = this->setSurfaceSize(surface, action.area); */
1418 WMError WindowManager::visibilityChange(const WMAction &action)
1420 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Change visibility");
1421 /* if(!g_app_list.contains(action.appid)){
1422 return WMError::NOT_REGISTERED;
1424 auto client = g_app_list.lookUpClient(action.appid);
1425 unsigned surface = client->surfaceID(action.role);
1428 HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1429 "client doesn't have surface with role(%s)", action.role.c_str());
1430 return WMError::NOT_REGISTERED;
1432 WMError ret = this->lc->visibilityChange(action);
1434 /* if (action.visible != TaskVisible::INVISIBLE)
1436 this->activate(surface); // Layout Manager task
1440 this->deactivate(surface); // Layout Manager task
1445 WMError WindowManager::setSurfaceSize(unsigned surface, const string &area)
1447 this->surface_set_layout(surface, area);
1449 return WMError::SUCCESS;
1452 void WindowManager::emitScreenUpdated(unsigned req_num)
1455 HMI_SEQ_DEBUG(req_num, "emit screen updated");
1457 auto actions = g_app_list.getActions(req_num, &found);
1459 // create json object
1460 json_object *j = json_object_new_object();
1461 json_object *jarray = json_object_new_array();
1463 for(const auto& action: actions)
1465 if(action.visible != TaskVisible::INVISIBLE)
1467 json_object_array_add(jarray, json_object_new_string(action.client->appID().c_str()));
1470 json_object_object_add(j, kKeyIds, jarray);
1471 HMI_SEQ_INFO(req_num, "Visible app: %s", json_object_get_string(j));
1473 int ret = afb_event_push(
1474 this->map_afb_event[kListEventName[Event_ScreenUpdated]], j);
1477 HMI_DEBUG("afb_event_push failed: %m");
1481 void WindowManager::setTimer()
1484 if (clock_gettime(CLOCK_BOOTTIME, &ts) != 0) {
1485 HMI_ERROR("Could't set time (clock_gettime() returns with error");
1489 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Timer set activate");
1490 if (g_timer_ev_src == nullptr)
1492 // firsttime set into sd_event
1493 int ret = sd_event_add_time(afb_daemon_get_event_loop(), &g_timer_ev_src,
1494 CLOCK_BOOTTIME, (uint64_t)(ts.tv_sec + kTimeOut) * 1000000ULL, 1, processTimerHandler, this);
1497 HMI_ERROR("Could't set timer");
1502 // update timer limitation after second time
1503 sd_event_source_set_time(g_timer_ev_src, (uint64_t)(ts.tv_sec + kTimeOut) * 1000000ULL);
1504 sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_ONESHOT);
1508 void WindowManager::stopTimer()
1510 unsigned req_num = g_app_list.currentRequestNumber();
1511 HMI_SEQ_DEBUG(req_num, "Timer stop");
1512 int rc = sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_OFF);
1515 HMI_SEQ_ERROR(req_num, "Timer stop failed");
1519 void WindowManager::processNextRequest()
1522 g_app_list.reqDump();
1523 unsigned req_num = g_app_list.currentRequestNumber();
1524 if (g_app_list.haveRequest())
1526 HMI_SEQ_DEBUG(req_num, "Process next request");
1527 WMError rc = checkPolicy(req_num);
1528 if (rc != WMError::SUCCESS)
1530 HMI_SEQ_ERROR(req_num, errorDescription(rc));
1535 HMI_SEQ_DEBUG(req_num, "Nothing Request. Waiting Request");
1539 const char* WindowManager::convertRoleOldToNew(char const *old_role)
1541 const char *new_role = nullptr;
1543 for (auto const &on : this->roleold2new)
1545 std::regex regex = std::regex(on.first);
1546 if (std::regex_match(old_role, regex))
1548 // role is old. So convert to new.
1549 new_role = on.second.c_str();
1554 if (nullptr == new_role)
1556 // role is new or fallback.
1557 new_role = old_role;
1560 HMI_DEBUG("old:%s -> new:%s", old_role, new_role);
1565 int WindowManager::loadOldRoleDb()
1567 // Get afm application installed dir
1568 char const *afm_app_install_dir = getenv("AFM_APP_INSTALL_DIR");
1569 HMI_DEBUG("afm_app_install_dir:%s", afm_app_install_dir);
1572 if (!afm_app_install_dir)
1574 HMI_ERROR("AFM_APP_INSTALL_DIR is not defined");
1578 file_name = string(afm_app_install_dir) + string("/etc/old_roles.db");
1582 json_object* json_obj;
1583 int ret = jh::inputJsonFilie(file_name.c_str(), &json_obj);
1586 HMI_ERROR("Could not open old_role.db, so use default old_role information");
1587 json_obj = json_tokener_parse(kDefaultOldRoleDb);
1589 HMI_DEBUG("json_obj dump:%s", json_object_get_string(json_obj));
1592 json_object* json_cfg;
1593 if (!json_object_object_get_ex(json_obj, "old_roles", &json_cfg))
1595 HMI_ERROR("Parse Error!!");
1599 int len = json_object_array_length(json_cfg);
1600 HMI_DEBUG("json_cfg len:%d", len);
1601 HMI_DEBUG("json_cfg dump:%s", json_object_get_string(json_cfg));
1603 for (int i=0; i<len; i++)
1605 json_object* json_tmp = json_object_array_get_idx(json_cfg, i);
1607 const char* old_role = jh::getStringFromJson(json_tmp, "name");
1608 if (nullptr == old_role)
1610 HMI_ERROR("Parse Error!!");
1614 const char* new_role = jh::getStringFromJson(json_tmp, "new");
1615 if (nullptr == new_role)
1617 HMI_ERROR("Parse Error!!");
1621 this->roleold2new[old_role] = string(new_role);
1625 for(auto itr = this->roleold2new.begin();
1626 itr != this->roleold2new.end(); ++itr)
1628 HMI_DEBUG(">>> role old:%s new:%s",
1629 itr->first.c_str(), itr->second.c_str());
1632 // Release json_object
1633 json_object_put(json_obj);
1638 const char *WindowManager::check_surface_exist(const char *drawing_name)
1640 auto const &surface_id = this->id_alloc.lookup(string(drawing_name));
1643 return "Surface does not exist";
1646 /* if (!this->controller->surface_exists(*surface_id))
1648 return "Surface does not exist in controller!";
1651 /* auto layer_id = this->layers.get_layer_id(*surface_id);
1655 return "Surface is not on any layer!";
1658 HMI_DEBUG("surface %d is detected", *surface_id);
1662 const char* WindowManager::kDefaultOldRoleDb = "{ \
1665 \"name\": \"HomeScreen\", \
1666 \"new\": \"homescreen\" \
1669 \"name\": \"Music\", \
1670 \"new\": \"music\" \
1673 \"name\": \"MediaPlayer\", \
1674 \"new\": \"music\" \
1677 \"name\": \"Video\", \
1678 \"new\": \"video\" \
1681 \"name\": \"VideoPlayer\", \
1682 \"new\": \"video\" \
1685 \"name\": \"WebBrowser\", \
1686 \"new\": \"browser\" \
1689 \"name\": \"Radio\", \
1690 \"new\": \"radio\" \
1693 \"name\": \"Phone\", \
1694 \"new\": \"phone\" \
1697 \"name\": \"Navigation\", \
1701 \"name\": \"HVAC\", \
1705 \"name\": \"Settings\", \
1706 \"new\": \"settings\" \
1709 \"name\": \"Dashboard\", \
1710 \"new\": \"dashboard\" \
1713 \"name\": \"POI\", \
1717 \"name\": \"Mixer\", \
1718 \"new\": \"mixer\" \
1721 \"name\": \"Restriction\", \
1722 \"new\": \"restriction\" \
1725 \"name\": \"^OnScreen.*\", \
1726 \"new\": \"on_screen\" \
1734 void controller_hooks::surface_created(uint32_t surface_id)
1736 this->wmgr->surface_created(surface_id);
1739 void controller_hooks::surface_removed(uint32_t surface_id)
1741 this->wmgr->surface_removed(surface_id);
1744 void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
1747 void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,
1753 void controller_hooks::surface_properties(uint32_t surface_id, uint32_t pid)
1755 this->wmgr->surface_properties(surface_id, pid);