2 * Copyright (C) 2015, 2016 "IoT.bzh"
3 * Author "Romain Forlot" <romain.forlot@iot.bzh>
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at
9 * http://www.apache.org/licenses/LICENSE-2.0
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
18 #include <configuration.hpp>
20 #define OBD2_FUNCTIONAL_BROADCAST_ID 0x7df
22 // Pre-defined OBD-II PIDs to query for if supported by the vehicle.
23 std::vector<obd2_signal_t> OBD2_PIDS = {
24 { 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false},
25 { 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
26 { 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false},
27 { 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false},
28 { 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false},
29 { 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false},
30 { 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
31 { 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false},
32 { 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false},
33 { 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false},
34 { 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false},
35 { 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false},
36 { 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false},
37 { 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false},
38 { 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false},
39 { 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false},
40 { 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false},
41 { 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false},
42 { 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false}
45 // Dumb signals and message implementation. To get compile.
46 std::vector<can_message_set_t> CAN_MESSAGE_SET;
48 std::vector<std::vector<can_message_definition_t>> CAN_MESSAGES_DEFINTION;
50 std::vector<std::vector<can_signal_t>> SIGNALS;
52 configuration_t::configuration_t()
53 : obd2_signals_{OBD2_PIDS}, can_message_set_{CAN_MESSAGE_SET}, can_signals_{SIGNALS}, can_message_definition_{CAN_MESSAGES_DEFINTION}
55 configuration_t& configuration_t::get_configuration()
60 can_bus_t& configuration_t::get_can_bus_manager()
62 return can_bus_manager_;
65 diagnostic_manager_t& configuration_t::get_diagnostic_manager() const
67 return diagnostic_manager_;
70 uint8_t configuration_t::get_active_message_set() const
72 return active_message_set_;
75 const std::vector<can_message_set_t>& configuration_t::get_can_message_set() const
77 return can_message_set_;
80 std::vector<can_signal_t>& configuration_t::get_can_signals() const
82 return can_signals_[active_message_set_];
85 const std::vector<can_message_definition_t>& configuration_t::get_can_message_definition() const
87 return can_message_definition_[active_message_set_];
90 std::vector<obd2_signal_t>& configuration_t::get_obd2_signals() const
95 uint32_t configuration_t::get_signal_id(obd2_signal_t& sig) const
100 uint32_t configuration_t::get_signal_id(can_signal_t& sig) const
102 return sig.get_message()->get_id();
105 void configuration_t::set_active_message_set(uint8_t id)
107 active_message_set_ = id;
111 * @fn std::vector<std::string> find_signals(const openxc_DynamicField &key)
112 * @brief return signals name found searching through CAN_signals and OBD2 pid
114 * @param[in] key - can contain numeric or string value in order to search against
115 * can signals or obd2 signals name.
117 * @return Vector of signals name found.
119 void configuration_t::find_obd2_signals(const openxc_DynamicField &key, std::vector<obd2_signal_t*>& found_signals)
123 case openxc_DynamicField_Type::openxc_DynamicField_Type_STRING:
124 lookup_signals_by_name(key.string_value, obd2_signals_, found_signals);
126 case openxc_DynamicField_Type::openxc_DynamicField_Type_NUM:
127 lookup_signals_by_id(key.numeric_value, obd2_signals_, found_signals);
130 ERROR(binder_interface, "find_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
133 DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());
137 * @fn void find_can_signals(const openxc_DynamicField& key, std::vector<can_signal_t*>& found_signals)
138 * @brief return signals name found searching through CAN_signals and OBD2 pid
140 * @param[in] key - can contain numeric or string value in order to search against
141 * can signals or obd2 signals name.
142 * @param[out] found_signals - provided vector to fill with ponter to signals matched.
145 void configuration_t::find_can_signals(const openxc_DynamicField& key, std::vector<can_signal_t*>& found_signals)
149 case openxc_DynamicField_Type::openxc_DynamicField_Type_STRING:
150 lookup_signals_by_name(std::string(key.string_value), can_signals_, found_signals);
152 case openxc_DynamicField_Type::openxc_DynamicField_Type_NUM:
153 lookup_signals_by_id(key.numeric_value, can_signals_ found_signals);
156 ERROR(binder_interface, "find_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
159 DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());