2 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 #include "applist.hpp"
19 #include "../include/hmi-debug.h"
21 using std::shared_ptr;
35 void AppList::addClient(const string &appid, const string &role)
37 shared_ptr<WMClient> client = std::make_shared<WMClient>(appid, role);
38 this->app2client[appid] = client;
42 void AppList::addClient(const std::string &appid, unsigned layer, unsigned surface, const std::string &role)
44 shared_ptr<WMClient> client = std::make_shared<WMClient>(appid, layer, surface, role);
45 this->app2client[appid] = client;
49 void AppList::removeClient(const string &appid)
51 this->app2client.erase(appid);
54 bool AppList::contains(const string &appid) const
56 auto result = this->app2client.find(appid);
57 return (this->app2client.end() != result) ? true : false;
60 void AppList::removeSurface(unsigned surface_id){
61 // This function may be very slow
63 for (auto &x : this->app2client)
65 ret = x.second->removeSurfaceIfExist(surface_id);
67 HMI_DEBUG("wm", "remove surface %d from Client %s finish", surface_id, x.second->appID().c_str());
74 * @brief get WMClient object. Before call this function, must call "contains"
75 * to check the key is contained, otherwise, you have to take care of std::out_of_range.
76 * @param string[in] application id(key)
77 * @return WMClient object
79 shared_ptr<WMClient> AppList::lookUpClient(const string &appid)
81 return this->app2client.at(appid);
84 int AppList::countClient() const
86 return this->app2client.size();
89 unsigned AppList::currentRequestNumber() const
91 return this->current_req;
94 WMError AppList::lookUpFloatingSurface(unsigned pid, unsigned *surface)
96 WMError ret = WMError::NO_ENTRY;
98 for (auto itr = this->floating_surfaces.begin(); itr != this->floating_surfaces.end(); ++itr)
101 *surface = itr->surface_id;
102 itr = this->floating_surfaces.erase(itr);
103 ret = WMError::SUCCESS;
104 HMI_DEBUG("wm", "Erase surface %d", *surface);
111 WMError AppList::lookUpFloatingSurface(const std::string &appid, unsigned *surface)
113 return WMError::SUCCESS;
116 WMError AppList::appendRole(const std::string &id, const std::string &role, unsigned surface)
118 WMError wm_err = WMError::NO_ENTRY;
119 if (this->contains(id))
121 auto x = this->lookUpClient(id);
122 x->addSurface(role, surface);
123 wm_err = WMError::SUCCESS;
128 unsigned AppList::getRequestNumber(const string &appid) const
130 for (const auto &x : this->req_list)
132 // Since app will not request twice and more, comparing appid is enough?
133 if ((x.trigger.appid == appid))
141 unsigned AppList::addAllocateRequest(WMRequest req)
143 if (this->req_list.size() == 0)
145 req.req_num = current_req;
149 HMI_SEQ_DEBUG(this->current_req, "add: %d", this->req_list.back().req_num + 1);
150 req.req_num = this->req_list.back().req_num + 1;
152 this->req_list.push_back(req);
153 return req.req_num; // return 1; if you test time_expire
156 struct WMTrigger AppList::getRequest(unsigned req_num)
158 for (const auto &x : this->req_list)
160 if (req_num == x.req_num)
167 const vector<struct WMAction> &AppList::getActions(unsigned req_num)
169 for (auto &x : this->req_list)
171 if (req_num == x.req_num)
173 return x.sync_draw_req;
178 WMError AppList::setAction(unsigned req_num, const struct WMAction &action)
180 WMError result = WMError::FAIL;
181 for (auto &x : this->req_list)
183 if (req_num != x.req_num)
187 x.sync_draw_req.push_back(action);
188 result = WMError::SUCCESS;
197 * This function set action with parameters.
198 * if visible is true, it means app should be visible, so enddraw_finished parameter should be false.
199 * otherwise (visible is false) app should be invisible. Then enddraw_finished param is set to true.
200 * This function doesn't support actions for focus yet.
202 WMError AppList::setAction(unsigned req_num, const string &appid, const string &role, const string &area, bool visible)
204 WMError result = WMError::NOT_REGISTERED;
205 for (auto &x : req_list)
207 if (req_num != x.req_num)
211 bool edraw_f = (visible) ? false : true;
212 WMAction action{appid, role, area, visible, edraw_f};
214 x.sync_draw_req.push_back(action);
215 result = WMError::SUCCESS;
222 * This function checks
223 * * req_num is equal to current request number
224 * * appid and role are equeal to the appid and role stored in action list(sync_draw_req)
226 bool AppList::setEndDrawFinished(unsigned req_num, const string &appid, const string &role)
229 for (auto &x : req_list)
231 if (req_num < x.req_num)
235 if (req_num == x.req_num)
237 for (auto &y : x.sync_draw_req)
239 if (y.appid == appid && y.role == role)
241 y.end_draw_finished = true;
252 * @brief check all actions of the requested sequence is finished
253 * @param unsigned request_number
254 * @return true if all action is set.
256 bool AppList::endDrawFullfilled(unsigned req_num)
259 for (const auto &x : req_list)
261 if (req_num < x.req_num)
265 if (req_num == x.req_num)
268 for (const auto &y : x.sync_draw_req)
270 result &= y.end_draw_finished;
281 void AppList::removeRequest(unsigned req_num)
283 this->req_list.erase(remove_if(this->req_list.begin(), this->req_list.end(),
284 [req_num](WMRequest x) {
285 return x.req_num == req_num;
292 if (0 == this->current_req)
294 this->current_req = 1;
298 bool AppList::haveRequest() const
300 return !this->req_list.empty();
303 void AppList::clientDump()
305 DUMP("======= client dump =====");
306 for (const auto &x : this->app2client)
308 const auto &y = x.second;
311 DUMP("======= client dump end=====");
314 void AppList::reqDump()
316 DUMP("======= req dump =====");
317 DUMP("current request : %d", current_req);
318 for (const auto &x : req_list)
320 DUMP("requested with : %d", x.req_num);
321 DUMP("Trigger : (APPID :%s, ROLE :%s, AREA :%s, TASK: %d)",
322 x.trigger.appid.c_str(),
323 x.trigger.role.c_str(),
324 x.trigger.area.c_str(),
327 for (const auto &y : x.sync_draw_req)
330 "Action : (APPID :%s, ROLE :%s, AREA :%s, END_DRAW_FINISHED: %d)",
334 y.end_draw_finished);
337 DUMP("======= req dump end =====\n");