2 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 #include "json_helper.hpp"
22 #include "wayland_ivi_wm.hpp"
29 #include <json-c/json.h>
38 #include "wm-client.hpp"
39 #include "applist.hpp"
43 #include <systemd/sd-event.h>
49 const unsigned TIME_OUT = 10000000UL; /* 10s */
51 /* DrawingArea name used by "{layout}.{area}" */
52 const char kNameLayoutNormal[] = "normal";
53 const char kNameLayoutSplit[] = "split";
54 const char kNameAreaFull[] = "full";
55 const char kNameAreaMain[] = "main";
56 const char kNameAreaSub[] = "sub";
58 /* Key for json obejct */
59 const char kKeyDrawingName[] = "drawing_name";
60 const char kKeyDrawingArea[] = "drawing_area";
61 const char kKeyDrawingRect[] = "drawing_rect";
62 const char kKeyX[] = "x";
63 const char kKeyY[] = "y";
64 const char kKeyWidth[] = "width";
65 const char kKeyHeight[] = "height";
66 const char kKeyWidthPixel[] = "width_pixel";
67 const char kKeyHeightPixel[] = "height_pixel";
68 const char kKeyWidthMm[] = "width_mm";
69 const char kKeyHeightMm[] = "height_mm";
71 static const std::string task_allocate = "allocate";
72 static const std::string task_release = "release";
73 static sd_event_source *timer_ev_src = nullptr;
75 static AppList app_list;
82 result<json> file_to_json(char const *filename)
85 std::ifstream i(filename);
88 HMI_DEBUG("wm", "Could not open config file, so use default layer information");
89 j = default_layers_json;
99 struct result<layer_map> load_layer_map(char const *filename)
101 HMI_DEBUG("wm", "loading IDs from %s", filename);
103 auto j = file_to_json(filename);
106 return Err<layer_map>(j.unwrap_err());
108 json jids = j.unwrap();
110 return to_layer_map(jids);
114 processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
116 HMI_NOTICE("wm", "Time out occurs because the client replys endDraw slow, so revert the request");
117 reinterpret_cast<wm::App *>(userdata)->timerHandler();
123 void App::timerHandler()
125 unsigned seq = app_list.currentSequenceNumber();
126 HMI_SEQ_DEBUG(seq, "Timer expired, remove Request");
128 app_list.removeRequest(seq);
131 if (app_list.haveRequest())
133 this->process_request();
137 void App::removeClient(const std::string &appid)
139 HMI_DEBUG("wm", "Remove clinet %s from list", appid.c_str());
140 app_list.removeClient(appid);
143 bool App::subscribeEventForApp(const std::string &appid, afb_req req, const std::string &evname)
145 if(!app_list.contains(appid)){
146 HMI_DEBUG("wm", "Client %s is not registered", appid.c_str());
149 auto client = app_list.lookUpClient(appid);
150 return client->subscribe(req, evname);
156 App::App(wl::display *d)
164 pending_events(false),
170 auto l = load_layer_map(
171 this->config.get_string("layers.json").value().c_str());
174 this->layers = l.unwrap();
178 HMI_ERROR("wm", "%s", l.err().value());
182 catch (std::exception &e)
184 HMI_ERROR("wm", "Loading of configuration failed: %s", e.what());
190 if (!this->display->ok())
195 if (this->layers.mapping.empty())
197 HMI_ERROR("wm", "No surface -> layer mapping loaded");
202 for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
204 map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
207 this->display->add_global_handler(
208 "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
209 this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
212 this->display->add_global_handler(
213 "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
215 std::make_unique<struct compositor::controller>(r, name, v);
217 // Init controller hooks
218 this->controller->chooks = &this->chooks;
220 // This protocol needs the output, so lets just add our mapping here...
221 this->controller->add_proxy_to_id_mapping(
222 this->outputs.back()->proxy.get(),
223 wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
224 this->outputs.back()->proxy.get())));
227 this->controller->create_screen(this->outputs.back()->proxy.get());
229 // Set display to controller
230 this->controller->display = this->display;
233 // First level objects
234 this->display->roundtrip();
235 // Second level objects
236 this->display->roundtrip();
237 // Third level objects
238 this->display->roundtrip();
240 return init_layers();
243 int App::dispatch_pending_events()
245 if (this->pop_pending_events())
247 this->display->dispatch_pending();
253 bool App::pop_pending_events()
256 return this->pending_events.compare_exchange_strong(
257 x, false, std::memory_order_consume);
260 void App::set_pending_events()
262 this->pending_events.store(true, std::memory_order_release);
265 optional<int> App::lookup_id(char const *name)
267 return this->id_alloc.lookup(std::string(name));
269 optional<std::string> App::lookup_name(int id)
271 return this->id_alloc.lookup(id);
277 int App::init_layers()
279 if (!this->controller)
281 HMI_ERROR("wm", "ivi_controller global not available");
285 if (this->outputs.empty())
287 HMI_ERROR("wm", "no output was set up!");
291 auto &c = this->controller;
293 auto &o = this->outputs.front();
294 auto &s = c->screens.begin()->second;
295 auto &layers = c->layers;
297 // Write output dimensions to ivi controller...
298 c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
299 c->physical_size = compositor::size{uint32_t(o->physical_width),
300 uint32_t(o->physical_height)};
308 // Quick and dirty setup of layers
309 for (auto const &i : this->layers.mapping)
311 c->layer_create(i.second.layer_id, o->width, o->height);
312 auto &l = layers[i.second.layer_id];
313 l->set_destination_rectangle(0, 0, o->width, o->height);
314 l->set_visibility(1);
315 HMI_DEBUG("wm", "Setting up layer %s (%d) for surface role match \"%s\"",
316 i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
319 // Add layers to screen
320 s->set_render_order(this->layers.layers);
322 this->layout_commit();
327 void App::surface_set_layout(int surface_id, optional<int> sub_surface_id)
329 if (!this->controller->surface_exists(surface_id))
331 HMI_ERROR("wm", "Surface %d does not exist", surface_id);
335 auto o_layer_id = this->layers.get_layer_id(surface_id);
339 HMI_ERROR("wm", "Surface %d is not associated with any layer!", surface_id);
343 uint32_t layer_id = *o_layer_id;
345 auto const &layer = this->layers.get_layer(layer_id);
346 auto rect = layer.value().rect;
347 auto &s = this->controller->surfaces[surface_id];
354 // less-than-0 values refer to MAX + 1 - $VALUE
355 // e.g. MAX is either screen width or height
358 w = this->controller->output_size.w + 1 + w;
362 h = this->controller->output_size.h + 1 + h;
367 if (o_layer_id != this->layers.get_layer_id(*sub_surface_id))
370 "surface_set_layout: layers of surfaces (%d and %d) don't match!",
371 surface_id, *sub_surface_id);
378 // split along major axis
390 auto &ss = this->controller->surfaces[*sub_surface_id];
392 HMI_DEBUG("wm", "surface_set_layout for sub surface %u on layer %u",
393 *sub_surface_id, layer_id);
395 // set destination to the display rectangle
396 ss->set_destination_rectangle(x + x_off, y + y_off, w, h);
398 this->area_info[*sub_surface_id].x = x;
399 this->area_info[*sub_surface_id].y = y;
400 this->area_info[*sub_surface_id].w = w;
401 this->area_info[*sub_surface_id].h = h;
404 HMI_DEBUG("wm", "surface_set_layout for surface %u on layer %u", surface_id,
407 // set destination to the display rectangle
408 s->set_destination_rectangle(x, y, w, h);
410 // update area information
411 this->area_info[surface_id].x = x;
412 this->area_info[surface_id].y = y;
413 this->area_info[surface_id].w = w;
414 this->area_info[surface_id].h = h;
416 HMI_DEBUG("wm", "Surface %u now on layer %u with rect { %d, %d, %d, %d }",
417 surface_id, layer_id, x, y, w, h);
420 void App::layout_commit()
422 this->controller->commit_changes();
423 this->display->flush();
426 void App::set_timer()
428 HMI_SEQ_DEBUG(app_list.currentSequenceNumber(), "Timer set activate");
429 if (timer_ev_src == nullptr)
431 // firsttime set into sd_event
432 int ret = sd_event_add_time(afb_daemon_get_event_loop(), &timer_ev_src,
433 CLOCK_REALTIME, time(NULL) * (1000000UL) + TIME_OUT, 1, processTimerHandler, this);
436 HMI_ERROR("wm", "Could't set timer");
441 // update timer limitation after second time
442 sd_event_source_set_time(timer_ev_src, time(NULL) * (1000000UL) + TIME_OUT);
443 sd_event_source_set_enabled(timer_ev_src, SD_EVENT_ONESHOT);
447 void App::stop_timer()
449 unsigned seq = app_list.currentSequenceNumber();
450 HMI_SEQ_DEBUG(seq, "Timer stop");
451 int rc = sd_event_source_set_enabled(timer_ev_src, SD_EVENT_OFF);
454 HMI_SEQ_ERROR(seq, "Timer stop failed");
458 bool App::lm_release(const struct WMAction &action)
460 //auto const &surface_id = this->lookup_id(drawing_name);
461 unsigned req_num = app_list.currentSequenceNumber();
462 auto const &surface_id = this->lookup_id(action.role.c_str());
465 HMI_SEQ_ERROR(req_num, "Surface does not exist");
469 if (*surface_id == this->layers.main_surface)
471 HMI_SEQ_ERROR(req_num, "Cannot deactivate main_surface");
475 auto o_state = *this->layers.get_layout_state(*surface_id);
477 if (o_state == nullptr)
479 HMI_SEQ_ERROR(req_num, "Could not find layer for surface");
483 struct LayoutState &state = *o_state;
485 if (state.main == -1)
487 HMI_SEQ_ERROR(req_num, "No surface active");
491 // Check against main_surface, main_surface_name is the configuration item.
492 if (*surface_id == this->layers.main_surface)
494 HMI_SEQ_DEBUG(req_num, "Refusing to deactivate main_surface %d", *surface_id);
498 if ((state.main == *surface_id) && (state.sub == *surface_id))
500 HMI_SEQ_ERROR(req_num, "Surface is not active");
504 if (state.main == *surface_id)
509 state, LayoutState{state.sub, -1}, [&](LayoutState const &nl) {
510 std::string sub = std::move(*this->lookup_name(state.sub));
512 this->deactivate(*surface_id);
513 this->surface_set_layout(state.sub);
516 this->layout_commit();
517 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
518 compositor::rect area_rect = this->area_info[state.sub];
519 this->emit_syncdraw(sub.c_str(), str_area.c_str(),
520 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
521 this->enqueue_flushdraw(state.sub);
526 this->try_layout(state, LayoutState{-1, -1}, [&](LayoutState const &nl) {
527 this->deactivate(*surface_id);
529 this->layout_commit();
533 else if (state.sub == *surface_id)
536 state, LayoutState{state.main, -1}, [&](LayoutState const &nl) {
537 std::string main = std::move(*this->lookup_name(state.main));
539 this->deactivate(*surface_id);
540 this->surface_set_layout(state.main);
543 this->layout_commit();
544 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
545 compositor::rect area_rect = this->area_info[state.main];
546 this->emit_syncdraw(main.c_str(), str_area.c_str(),
547 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
548 this->enqueue_flushdraw(state.main);
554 bool App::lm_layout_change(const struct WMAction &action)
556 const char *msg = this->check_surface_exist(action.role.c_str());
559 lm_.updateLayout(action);
560 TODO: emit syncDraw with application*/
563 HMI_SEQ_DEBUG(app_list.currentSequenceNumber(), msg);
564 //app_list.removeRequest(req_num);
567 this->lm_layout_change(action.role.c_str());
571 bool App::do_transition(unsigned req_num)
576 // get current trigger
577 auto trigger = app_list.getRequest(req_num);
578 bool is_activate = true;
580 /* get new status from Policy Manager
582 (json_object*?) newLayout = checkPolicy(trigger);
583 (vector<struct WMAction>&) auto actions = translator.inputActionFromLayout(newLayout, currentLayout)
584 for(const auto& x : actions){
585 app_list.setAciton(req_num, x)
590 translator.inputActionFromLayout(newLayout, currentLayout, &app_list, req_num);
592 /* The following error check is not necessary because main.cpp will reject the message form not registered object
594 HMI_SEQ_NOTICE(req_num, "ATM, Policy manager does't exist, then set WMAction as is");
596 if (TASK_RELEASE == trigger.task)
600 bool ret = app_list.setAction(req_num, trigger.appid, trigger.role, trigger.area, is_activate);
605 HMI_SEQ_ERROR(req_num, "Failed to set action");
609 // layer manager task
610 bool sync_draw_happen = false;
611 for (const auto &y : app_list.getActions(req_num))
617 but current we can't do do_task,
618 so divide the processing into lm_layout_change and lm_release
622 sync_draw_happen = true;
623 ret = lm_layout_change(y);
626 HMI_SEQ_ERROR(req_num, "Failed layout change: %s", y.appid.c_str());
627 app_list.removeRequest(req_num);
629 // TODO: if transition fails, what should we do?
631 /* app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
638 HMI_SEQ_ERROR(req_num, "Failed release resource: %s", y.appid.c_str());
639 app_list.removeRequest(req_num);
641 // TODO: if transition fails, what should we do?
643 /* app_list.lookUpClient(y.appid)->emit_invisible(y.role, y.area); */
649 //this->emit_error(request_seq, 0 /*error_num*/, "error happens"); // test
651 else if (ret && sync_draw_happen)
657 app_list.removeRequest(req_num); // HACK!!!
662 void App::lm_layout_change(const char *drawing_name)
664 auto const &surface_id = this->lookup_id(drawing_name);
665 auto layer_id = this->layers.get_layer_id(*surface_id);
666 auto o_state = *this->layers.get_layout_state(*surface_id);
667 struct LayoutState &state = *o_state;
669 // disable layers that are above our current layer
670 for (auto const &l : this->layers.mapping)
672 if (l.second.layer_id <= *layer_id)
678 if (l.second.state.main != -1)
680 this->deactivate(l.second.state.main);
681 l.second.state.main = -1;
685 if (l.second.state.sub != -1)
687 this->deactivate(l.second.state.sub);
688 l.second.state.sub = -1;
694 this->layout_commit();
698 auto layer = this->layers.get_layer(*layer_id);
700 if (state.main == -1)
703 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
704 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
705 this->surface_set_layout(*surface_id);
708 // Commit for configuraton
709 this->layout_commit();
711 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
712 compositor::rect area_rect = this->area_info[*surface_id];
713 this->emit_syncdraw(drawing_name, str_area.c_str(),
714 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
715 this->enqueue_flushdraw(state.main);
720 if (0 == strcmp(drawing_name, "HomeScreen"))
723 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
724 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
725 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
726 compositor::rect area_rect = this->area_info[*surface_id];
727 this->emit_syncdraw(drawing_name, str_area.c_str(),
728 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
729 this->enqueue_flushdraw(state.main);
734 bool can_split = this->can_split(state, *surface_id);
740 LayoutState{state.main, *surface_id},
741 [&](LayoutState const &nl) {
742 HMI_DEBUG("wm", "Layout: %s", kNameLayoutSplit);
744 std::move(*this->lookup_name(state.main));
746 this->surface_set_layout(state.main, surface_id);
747 if (state.sub != *surface_id)
751 this->deactivate(state.sub);
756 // Commit for configuration and visibility(0)
757 this->layout_commit();
759 std::string str_area_main = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaMain);
760 std::string str_area_sub = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaSub);
761 compositor::rect area_rect_main = this->area_info[state.main];
762 compositor::rect area_rect_sub = this->area_info[*surface_id];
763 this->emit_syncdraw(main.c_str(), str_area_main.c_str(),
764 area_rect_main.x, area_rect_main.y,
765 area_rect_main.w, area_rect_main.h);
766 this->emit_syncdraw(drawing_name, str_area_sub.c_str(),
767 area_rect_sub.x, area_rect_sub.y,
768 area_rect_sub.w, area_rect_sub.h);
769 this->enqueue_flushdraw(state.main);
770 this->enqueue_flushdraw(state.sub);
776 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
777 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
779 this->surface_set_layout(*surface_id);
780 if (state.main != *surface_id)
782 this->deactivate(state.main);
786 if (state.sub != *surface_id)
788 this->deactivate(state.sub);
793 // Commit for configuraton and visibility(0)
794 this->layout_commit();
796 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
797 compositor::rect area_rect = this->area_info[*surface_id];
798 this->emit_syncdraw(drawing_name, str_area.c_str(),
799 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
800 this->enqueue_flushdraw(state.main);
807 const char *App::check_surface_exist(const char *drawing_name)
809 auto const &surface_id = this->lookup_id(drawing_name);
812 //reply("Surface does not exist");
813 return "Surface does not exist";
816 if (!this->controller->surface_exists(*surface_id))
818 //reply("Surface does not exist in controller!");
819 return "Surface does not exist in controller!";
822 auto layer_id = this->layers.get_layer_id(*surface_id);
826 //reply("Surface is not on any layer!");
827 return "Surface is not on any layer!";
830 auto o_state = *this->layers.get_layout_state(*surface_id);
832 if (o_state == nullptr)
834 //reply("Could not find layer for surface");
835 return "Could not find layer for surface";
838 HMI_DEBUG("wm", "surface %d is detected", *surface_id);
843 void App::api_activate_surface(char const *appid, char const *drawing_name, char const *drawing_area, const reply_func &reply)
851 std::string id = appid;
852 std::string role = drawing_name;
853 std::string area = drawing_area;
855 if (!app_list.contains(id))
857 reply("app doesn't request 'requestSurface' yet");
861 auto client = app_list.lookUpClient(id);
866 unsigned current = app_list.currentSequenceNumber();
867 unsigned requested_num = app_list.getSequenceNumber(id);
868 if (requested_num != 0)
870 HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", id.c_str(), role.c_str(), area.c_str());
871 reply("already requested");
875 WMRequest req = WMRequest(id, role, area, Task::TASK_ALLOCATE);
876 unsigned new_req = app_list.addAllocateRequest(req);
879 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", id.c_str(), role.c_str(), area.c_str());
882 if (new_req != current)
884 // Add request, then invoked after the previous task is finished
885 HMI_SEQ_DEBUG(new_req, "request is accepted");
892 bool ret = this->do_transition(new_req);
896 HMI_SEQ_ERROR(new_req, "failed to do_transition");
901 void App::api_deactivate_surface(char const *appid, char const *drawing_name, const reply_func &reply)
908 std::string id = appid;
909 std::string role = drawing_name;
910 std::string area = ""; //drawing_area;
912 if (!app_list.contains(id))
914 reply("app doesn't request 'requestSurface' yet");
917 auto client = app_list.lookUpClient(id);
922 unsigned current = app_list.currentSequenceNumber();
923 unsigned requested_num = app_list.getSequenceNumber(id);
924 if (requested_num != 0)
926 HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", id.c_str(), role.c_str(), area.c_str());
927 reply("already requested");
931 WMRequest req = WMRequest(id, role, area, Task::TASK_RELEASE);
932 unsigned new_req = app_list.addAllocateRequest(req);
935 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", id.c_str(), role.c_str(), area.c_str());
938 if (new_req != current)
940 // Add request, then invoked after the previous task is finished
941 HMI_SEQ_DEBUG(new_req, "request is accepted");
948 bool ret = this->do_transition(new_req);
952 HMI_SEQ_ERROR(new_req, "failed to do_transition");
957 void App::enqueue_flushdraw(int surface_id)
959 this->check_flushdraw(surface_id);
960 HMI_DEBUG("wm", "Enqueuing EndDraw for surface_id %d", surface_id);
961 this->pending_end_draw.push_back(surface_id);
964 void App::check_flushdraw(int surface_id)
966 auto i = std::find(std::begin(this->pending_end_draw),
967 std::end(this->pending_end_draw), surface_id);
968 if (i != std::end(this->pending_end_draw))
970 auto n = this->lookup_name(surface_id);
971 HMI_ERROR("wm", "Application %s (%d) has pending EndDraw call(s)!",
972 n ? n->c_str() : "unknown-name", surface_id);
973 std::swap(this->pending_end_draw[std::distance(
974 std::begin(this->pending_end_draw), i)],
975 this->pending_end_draw.back());
976 this->pending_end_draw.resize(this->pending_end_draw.size() - 1);
980 void App::lm_enddraw(const char *drawing_name)
982 HMI_DEBUG("wm", "end draw %s", drawing_name);
983 for (unsigned i = 0, iend = this->pending_end_draw.size(); i < iend; i++)
985 auto n = this->lookup_name(this->pending_end_draw[i]);
986 if (n && *n == drawing_name)
988 std::swap(this->pending_end_draw[i], this->pending_end_draw[iend - 1]);
989 this->pending_end_draw.resize(iend - 1);
990 this->activate(this->pending_end_draw[i]);
991 this->emit_flushdraw(drawing_name);
996 void App::do_enddraw(unsigned request_seq)
999 auto actions = app_list.getActions(request_seq);
1000 HMI_SEQ_INFO(request_seq, "do endDraw");
1002 for (const auto &act : actions)
1004 HMI_SEQ_DEBUG(request_seq, "visible %s", act.role.c_str());
1005 this->lm_enddraw(act.role.c_str());
1008 HMI_SEQ_INFO(request_seq, "emit flushDraw");
1012 //emitFlushDrawToAll(&app_list, request_seq);
1013 // emit status change event
1014 } while (!app_list.requestFinished());*/
1017 void App::process_request()
1019 unsigned req = app_list.currentSequenceNumber();
1020 HMI_SEQ_DEBUG(req, "Do next request");
1024 void App::api_enddraw(char const *appid, char const *drawing_name)
1026 std::string id(appid);
1027 std::string role(drawing_name);
1028 unsigned current_seq = app_list.currentSequenceNumber();
1029 bool result = app_list.setEndDrawFinished(current_seq, id, role);
1033 HMI_ERROR("wm", "%s doesn't have Window Resource", id.c_str());
1037 if (app_list.endDrawFullfilled(current_seq))
1039 // do task for endDraw
1040 //this->stop_timer();
1041 this->do_enddraw(current_seq);
1045 app_list.removeRequest(current_seq);
1046 HMI_SEQ_INFO(current_seq, "Finish request");
1048 if (app_list.haveRequest())
1050 this->process_request();
1055 HMI_SEQ_INFO(current_seq, "Wait other App call endDraw");
1060 void App::api_ping() { this->dispatch_pending_events(); }
1062 void App::send_event(char const *evname, char const *label)
1064 HMI_DEBUG("wm", "%s: %s(%s)", __func__, evname, label);
1066 json_object *j = json_object_new_object();
1067 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
1069 int ret = afb_event_push(this->map_afb_event[evname], j);
1072 HMI_DEBUG("wm", "afb_event_push failed: %m");
1076 void App::send_event(char const *evname, char const *label, char const *area,
1077 int x, int y, int w, int h)
1079 HMI_DEBUG("wm", "%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
1080 __func__, evname, label, area, x, y, w, h);
1082 json_object *j_rect = json_object_new_object();
1083 json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
1084 json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
1085 json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
1086 json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));
1088 json_object *j = json_object_new_object();
1089 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
1090 json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
1091 json_object_object_add(j, kKeyDrawingRect, j_rect);
1093 int ret = afb_event_push(this->map_afb_event[evname], j);
1096 HMI_DEBUG("wm", "afb_event_push failed: %m");
1103 void App::surface_created(uint32_t surface_id)
1105 auto layer_id = this->layers.get_layer_id(surface_id);
1108 HMI_DEBUG("wm", "Newly created surfce %d is not associated with any layer!",
1113 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface_id, *layer_id);
1115 this->controller->layers[*layer_id]->add_surface(surface_id);
1116 this->layout_commit();
1117 // activate the main_surface right away
1118 /*if (surface_id == static_cast<unsigned>(this->layers.main_surface)) {
1119 HMI_DEBUG("wm", "Activating main_surface (%d)", surface_id);
1121 this->api_activate_surface(
1122 this->lookup_name(surface_id).value_or("unknown-name").c_str());
1125 // search pid from surfaceID
1127 // pick up appid from pid from application manager
1129 // check appid then add it to the client
1132 void App::surface_removed(uint32_t surface_id)
1134 HMI_DEBUG("wm", "surface_id is %u", surface_id);
1136 app_list.removeSurface(surface_id);
1139 void App::emit_activated(char const *label)
1141 this->send_event(kListEventName[Event_Active], label);
1144 void App::emit_deactivated(char const *label)
1146 this->send_event(kListEventName[Event_Inactive], label);
1149 void App::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
1151 this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
1154 void App::emit_flushdraw(char const *label)
1156 this->send_event(kListEventName[Event_FlushDraw], label);
1159 void App::emit_visible(char const *label, bool is_visible)
1161 this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
1164 void App::emit_invisible(char const *label)
1166 return emit_visible(label, false);
1169 void App::emit_visible(char const *label) { return emit_visible(label, true); }
1171 result<int> App::api_request_surface(char const *appid, char const *drawing_name)
1173 auto lid = this->layers.get_layer_id(std::string(drawing_name));
1177 * register drawing_name as fallback and make it displayed.
1179 lid = this->layers.get_layer_id(std::string("Fallback"));
1180 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
1183 return Err<int>("Drawing name does not match any role, Fallback is disabled");
1187 auto rname = this->lookup_id(drawing_name);
1190 // name does not exist yet, allocate surface id...
1191 auto id = int(this->id_alloc.generate_id(drawing_name));
1192 this->layers.add_surface(id, *lid);
1194 // set the main_surface[_name] here and now
1195 if (!this->layers.main_surface_name.empty() &&
1196 this->layers.main_surface_name == drawing_name)
1198 this->layers.main_surface = id;
1199 HMI_DEBUG("wm", "Set main_surface id to %u", id);
1202 // add client into the db
1203 std::string appid_str(appid);
1204 std::string role(drawing_name);
1205 //app_list.addClient(appid_str, role);
1206 app_list.addClient(appid_str, *lid, id, role);
1211 // Check currently registered drawing names if it is already there.
1212 return Err<int>("Surface already present");
1215 char const *App::api_request_surface(char const *appid, char const *drawing_name,
1220 auto lid = this->layers.get_layer_id(std::string(drawing_name));
1221 unsigned sid = std::stol(ivi_id);
1226 * register drawing_name as fallback and make it displayed.
1228 lid = this->layers.get_layer_id(std::string("Fallback"));
1229 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
1232 return "Drawing name does not match any role, Fallback is disabled";
1236 auto rname = this->lookup_id(drawing_name);
1240 return "Surface already present";
1243 // register pair drawing_name and ivi_id
1244 this->id_alloc.register_name_id(drawing_name, sid);
1245 this->layers.add_surface(sid, *lid);
1247 // this surface is already created
1248 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", sid, *lid);
1250 this->controller->layers[*lid]->add_surface(sid);
1251 this->layout_commit();
1256 result<json_object *> App::api_get_display_info()
1259 if (!this->controller)
1261 return Err<json_object *>("ivi_controller global not available");
1265 compositor::size o_size = this->controller->output_size;
1266 compositor::size p_size = this->controller->physical_size;
1268 json_object *object = json_object_new_object();
1269 json_object_object_add(object, kKeyWidthPixel, json_object_new_int(o_size.w));
1270 json_object_object_add(object, kKeyHeightPixel, json_object_new_int(o_size.h));
1271 json_object_object_add(object, kKeyWidthMm, json_object_new_int(p_size.w));
1272 json_object_object_add(object, kKeyHeightMm, json_object_new_int(p_size.h));
1274 return Ok<json_object *>(object);
1277 result<json_object *> App::api_get_area_info(char const *drawing_name)
1279 HMI_DEBUG("wm", "called");
1281 // Check drawing name, surface/layer id
1282 auto const &surface_id = this->lookup_id(drawing_name);
1285 return Err<json_object *>("Surface does not exist");
1288 if (!this->controller->surface_exists(*surface_id))
1290 return Err<json_object *>("Surface does not exist in controller!");
1293 auto layer_id = this->layers.get_layer_id(*surface_id);
1296 return Err<json_object *>("Surface is not on any layer!");
1299 auto o_state = *this->layers.get_layout_state(*surface_id);
1300 if (o_state == nullptr)
1302 return Err<json_object *>("Could not find layer for surface");
1305 struct LayoutState &state = *o_state;
1306 if ((state.main != *surface_id) && (state.sub != *surface_id))
1308 return Err<json_object *>("Surface is inactive");
1311 // Set area rectangle
1312 compositor::rect area_info = this->area_info[*surface_id];
1313 json_object *object = json_object_new_object();
1314 json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
1315 json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
1316 json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
1317 json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));
1319 return Ok<json_object *>(object);
1322 void App::activate(int id)
1324 auto ip = this->controller->sprops.find(id);
1325 if (ip != this->controller->sprops.end())
1327 this->controller->surfaces[id]->set_visibility(1);
1329 this->lookup_name(id).value_or("unknown-name").c_str();
1332 if ((0 == strcmp(label, "Radio")) || (0 == strcmp(label, "MediaPlayer")) || (0 == strcmp(label, "Music")) || (0 == strcmp(label, "Navigation")))
1334 for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
1339 this->surface_bg.erase(i);
1341 // Remove from BG layer (999)
1342 HMI_DEBUG("wm", "Remove %s(%d) from BG layer", label, id);
1343 this->controller->layers[999]->remove_surface(id);
1345 // Add to FG layer (1001)
1346 HMI_DEBUG("wm", "Add %s(%d) to FG layer", label, id);
1347 this->controller->layers[1001]->add_surface(id);
1349 for (int j : this->surface_bg)
1351 HMI_DEBUG("wm", "Stored id:%d", j);
1358 this->layout_commit();
1360 this->emit_visible(label);
1361 this->emit_activated(label);
1365 void App::deactivate(int id)
1367 auto ip = this->controller->sprops.find(id);
1368 if (ip != this->controller->sprops.end())
1371 this->lookup_name(id).value_or("unknown-name").c_str();
1374 if ((0 == strcmp(label, "Radio")) || (0 == strcmp(label, "MediaPlayer")) || (0 == strcmp(label, "Music")) || (0 == strcmp(label, "Navigation")))
1378 this->surface_bg.push_back(id);
1380 // Remove from FG layer (1001)
1381 HMI_DEBUG("wm", "Remove %s(%d) from FG layer", label, id);
1382 this->controller->layers[1001]->remove_surface(id);
1384 // Add to BG layer (999)
1385 HMI_DEBUG("wm", "Add %s(%d) to BG layer", label, id);
1386 this->controller->layers[999]->add_surface(id);
1388 for (int j : surface_bg)
1390 HMI_DEBUG("wm", "Stored id:%d", j);
1395 this->controller->surfaces[id]->set_visibility(0);
1399 this->emit_deactivated(label);
1400 this->emit_invisible(label);
1404 void App::deactivate_main_surface()
1406 this->layers.main_surface = -1;
1407 std::string appid = "HomeScreen";
1408 this->api_deactivate_surface(appid.c_str(), this->layers.main_surface_name.c_str(), [](const char *) {});
1411 bool App::can_split(struct LayoutState const &state, int new_id)
1413 if (state.main != -1 && state.main != new_id)
1415 auto new_id_layer = this->layers.get_layer_id(new_id).value();
1416 auto current_id_layer = this->layers.get_layer_id(state.main).value();
1418 // surfaces are on separate layers, don't bother.
1419 if (new_id_layer != current_id_layer)
1424 std::string const &new_id_str = this->lookup_name(new_id).value();
1425 std::string const &cur_id_str = this->lookup_name(state.main).value();
1427 auto const &layer = this->layers.get_layer(new_id_layer);
1429 HMI_DEBUG("wm", "layer info name: %s", layer->name.c_str());
1431 if (layer->layouts.empty())
1436 for (auto i = layer->layouts.cbegin(); i != layer->layouts.cend(); i++)
1438 HMI_DEBUG("wm", "%d main_match '%s'", new_id_layer, i->main_match.c_str());
1439 auto rem = std::regex(i->main_match);
1440 if (std::regex_match(cur_id_str, rem))
1442 // build the second one only if the first already matched
1443 HMI_DEBUG("wm", "%d sub_match '%s'", new_id_layer, i->sub_match.c_str());
1444 auto res = std::regex(i->sub_match);
1445 if (std::regex_match(new_id_str, res))
1447 HMI_DEBUG("wm", "layout matched!");
1457 void App::try_layout(struct LayoutState & /*state*/,
1458 struct LayoutState const &new_layout,
1459 std::function<void(LayoutState const &nl)> apply)
1461 if (this->policy.layout_is_valid(new_layout))
1470 void controller_hooks::surface_created(uint32_t surface_id)
1472 this->app->surface_created(surface_id);
1475 void controller_hooks::surface_removed(uint32_t surface_id)
1477 this->app->surface_removed(surface_id);
1480 void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
1483 void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,