2 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 #include "json_helper.hpp"
22 #include "wayland_ivi_wm.hpp"
29 #include <json-c/json.h>
38 #include "wm-client.hpp"
39 #include "applist.hpp"
43 #include <systemd/sd-event.h>
49 const unsigned kTimeOut = 10000000UL; /* 10s */
51 /* DrawingArea name used by "{layout}.{area}" */
52 const char kNameLayoutNormal[] = "normal";
53 const char kNameLayoutSplit[] = "split";
54 const char kNameAreaFull[] = "full";
55 const char kNameAreaMain[] = "main";
56 const char kNameAreaSub[] = "sub";
58 /* Key for json obejct */
59 const char kKeyDrawingName[] = "drawing_name";
60 const char kKeyDrawingArea[] = "drawing_area";
61 const char kKeyDrawingRect[] = "drawing_rect";
62 const char kKeyX[] = "x";
63 const char kKeyY[] = "y";
64 const char kKeyWidth[] = "width";
65 const char kKeyHeight[] = "height";
66 const char kKeyWidthPixel[] = "width_pixel";
67 const char kKeyHeightPixel[] = "height_pixel";
68 const char kKeyWidthMm[] = "width_mm";
69 const char kKeyHeightMm[] = "height_mm";
71 static sd_event_source *g_timer_ev_src = nullptr;
73 static AppList g_app_list;
80 result<json> file_to_json(char const *filename)
83 std::ifstream i(filename);
86 HMI_DEBUG("wm", "Could not open config file, so use default layer information");
87 j = default_layers_json;
97 struct result<layer_map> load_layer_map(char const *filename)
99 HMI_DEBUG("wm", "loading IDs from %s", filename);
101 auto j = file_to_json(filename);
104 return Err<layer_map>(j.unwrap_err());
106 json jids = j.unwrap();
108 return to_layer_map(jids);
112 processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
114 HMI_NOTICE("wm", "Time out occurs because the client replys endDraw slow, so revert the request");
115 reinterpret_cast<wm::App *>(userdata)->timerHandler();
121 void App::timerHandler()
123 unsigned req_num = g_app_list.currentRequestNumber();
124 HMI_SEQ_DEBUG(req_num, "Timer expired remove Request");
125 g_app_list.reqDump();
126 g_app_list.removeRequest(req_num);
128 g_app_list.reqDump();
129 if (g_app_list.haveRequest())
131 this->process_request();
135 void App::removeClient(const std::string &appid)
137 HMI_DEBUG("wm", "Remove clinet %s from list", appid.c_str());
138 g_app_list.removeClient(appid);
141 bool App::subscribeEventForApp(const std::string &appid, afb_req req, const std::string &evname)
143 if(!g_app_list.contains(appid)){
144 HMI_DEBUG("wm", "Client %s is not registered", appid.c_str());
147 auto client = g_app_list.lookUpClient(appid);
148 return client->subscribe(req, evname);
154 App::App(wl::display *d)
162 pending_events(false),
168 auto l = load_layer_map(
169 this->config.get_string("layers.json").value().c_str());
172 this->layers = l.unwrap();
176 HMI_ERROR("wm", "%s", l.err().value());
180 catch (std::exception &e)
182 HMI_ERROR("wm", "Loading of configuration failed: %s", e.what());
188 if (!this->display->ok())
193 if (this->layers.mapping.empty())
195 HMI_ERROR("wm", "No surface -> layer mapping loaded");
200 for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
202 map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
205 this->display->add_global_handler(
206 "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
207 this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
210 this->display->add_global_handler(
211 "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
213 std::make_unique<struct compositor::controller>(r, name, v);
215 // Init controller hooks
216 this->controller->chooks = &this->chooks;
218 // This protocol needs the output, so lets just add our mapping here...
219 this->controller->add_proxy_to_id_mapping(
220 this->outputs.back()->proxy.get(),
221 wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
222 this->outputs.back()->proxy.get())));
225 this->controller->create_screen(this->outputs.back()->proxy.get());
227 // Set display to controller
228 this->controller->display = this->display;
231 // First level objects
232 this->display->roundtrip();
233 // Second level objects
234 this->display->roundtrip();
235 // Third level objects
236 this->display->roundtrip();
238 return init_layers();
241 int App::dispatch_pending_events()
243 if (this->pop_pending_events())
245 this->display->dispatch_pending();
251 bool App::pop_pending_events()
254 return this->pending_events.compare_exchange_strong(
255 x, false, std::memory_order_consume);
258 void App::set_pending_events()
260 this->pending_events.store(true, std::memory_order_release);
263 optional<int> App::lookup_id(char const *name)
265 return this->id_alloc.lookup(std::string(name));
267 optional<std::string> App::lookup_name(int id)
269 return this->id_alloc.lookup(id);
275 int App::init_layers()
277 if (!this->controller)
279 HMI_ERROR("wm", "ivi_controller global not available");
283 if (this->outputs.empty())
285 HMI_ERROR("wm", "no output was set up!");
289 auto &c = this->controller;
291 auto &o = this->outputs.front();
292 auto &s = c->screens.begin()->second;
293 auto &layers = c->layers;
295 // Write output dimensions to ivi controller...
296 c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
297 c->physical_size = compositor::size{uint32_t(o->physical_width),
298 uint32_t(o->physical_height)};
306 // Quick and dirty setup of layers
307 for (auto const &i : this->layers.mapping)
309 c->layer_create(i.second.layer_id, o->width, o->height);
310 auto &l = layers[i.second.layer_id];
311 l->set_destination_rectangle(0, 0, o->width, o->height);
312 l->set_visibility(1);
313 HMI_DEBUG("wm", "Setting up layer %s (%d) for surface role match \"%s\"",
314 i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
317 // Add layers to screen
318 s->set_render_order(this->layers.layers);
320 this->layout_commit();
325 void App::surface_set_layout(int surface_id, optional<int> sub_surface_id)
327 if (!this->controller->surface_exists(surface_id))
329 HMI_ERROR("wm", "Surface %d does not exist", surface_id);
333 auto o_layer_id = this->layers.get_layer_id(surface_id);
337 HMI_ERROR("wm", "Surface %d is not associated with any layer!", surface_id);
341 uint32_t layer_id = *o_layer_id;
343 auto const &layer = this->layers.get_layer(layer_id);
344 auto rect = layer.value().rect;
345 auto &s = this->controller->surfaces[surface_id];
352 // less-than-0 values refer to MAX + 1 - $VALUE
353 // e.g. MAX is either screen width or height
356 w = this->controller->output_size.w + 1 + w;
360 h = this->controller->output_size.h + 1 + h;
365 if (o_layer_id != this->layers.get_layer_id(*sub_surface_id))
368 "surface_set_layout: layers of surfaces (%d and %d) don't match!",
369 surface_id, *sub_surface_id);
376 // split along major axis
388 auto &ss = this->controller->surfaces[*sub_surface_id];
390 HMI_DEBUG("wm", "surface_set_layout for sub surface %u on layer %u",
391 *sub_surface_id, layer_id);
393 // set destination to the display rectangle
394 ss->set_destination_rectangle(x + x_off, y + y_off, w, h);
396 this->area_info[*sub_surface_id].x = x;
397 this->area_info[*sub_surface_id].y = y;
398 this->area_info[*sub_surface_id].w = w;
399 this->area_info[*sub_surface_id].h = h;
402 HMI_DEBUG("wm", "surface_set_layout for surface %u on layer %u", surface_id,
405 // set destination to the display rectangle
406 s->set_destination_rectangle(x, y, w, h);
408 // update area information
409 this->area_info[surface_id].x = x;
410 this->area_info[surface_id].y = y;
411 this->area_info[surface_id].w = w;
412 this->area_info[surface_id].h = h;
414 HMI_DEBUG("wm", "Surface %u now on layer %u with rect { %d, %d, %d, %d }",
415 surface_id, layer_id, x, y, w, h);
418 void App::layout_commit()
420 this->controller->commit_changes();
421 this->display->flush();
424 void App::set_timer()
426 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Timer set activate");
427 if (g_timer_ev_src == nullptr)
429 // firsttime set into sd_event
430 int ret = sd_event_add_time(afb_daemon_get_event_loop(), &g_timer_ev_src,
431 CLOCK_REALTIME, time(NULL) * (1000000UL) + kTimeOut, 1, processTimerHandler, this);
434 HMI_ERROR("wm", "Could't set timer");
439 // update timer limitation after second time
440 sd_event_source_set_time(g_timer_ev_src, time(NULL) * (1000000UL) + kTimeOut);
441 sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_ONESHOT);
445 void App::stop_timer()
447 unsigned req_num = g_app_list.currentRequestNumber();
448 HMI_SEQ_DEBUG(req_num, "Timer stop");
449 int rc = sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_OFF);
452 HMI_SEQ_ERROR(req_num, "Timer stop failed");
456 bool App::lm_release(const struct WMAction &action)
458 //auto const &surface_id = this->lookup_id(drawing_name);
459 unsigned req_num = g_app_list.currentRequestNumber();
460 auto const &surface_id = this->lookup_id(action.role.c_str());
463 HMI_SEQ_ERROR(req_num, "Surface does not exist");
467 if (*surface_id == this->layers.main_surface)
469 HMI_SEQ_ERROR(req_num, "Cannot deactivate main_surface");
473 auto o_state = *this->layers.get_layout_state(*surface_id);
475 if (o_state == nullptr)
477 HMI_SEQ_ERROR(req_num, "Could not find layer for surface");
481 struct LayoutState &state = *o_state;
483 if (state.main == -1)
485 HMI_SEQ_ERROR(req_num, "No surface active");
489 // Check against main_surface, main_surface_name is the configuration item.
490 if (*surface_id == this->layers.main_surface)
492 HMI_SEQ_DEBUG(req_num, "Refusing to deactivate main_surface %d", *surface_id);
496 if ((state.main == *surface_id) && (state.sub == *surface_id))
498 HMI_SEQ_ERROR(req_num, "Surface is not active");
502 if (state.main == *surface_id)
507 state, LayoutState{state.sub, -1}, [&](LayoutState const &nl) {
508 std::string sub = std::move(*this->lookup_name(state.sub));
510 this->deactivate(*surface_id);
511 this->surface_set_layout(state.sub);
514 this->layout_commit();
515 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
516 compositor::rect area_rect = this->area_info[state.sub];
517 this->emit_syncdraw(sub.c_str(), str_area.c_str(),
518 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
519 this->enqueue_flushdraw(state.sub);
524 this->try_layout(state, LayoutState{-1, -1}, [&](LayoutState const &nl) {
525 this->deactivate(*surface_id);
527 this->layout_commit();
531 else if (state.sub == *surface_id)
534 state, LayoutState{state.main, -1}, [&](LayoutState const &nl) {
535 std::string main = std::move(*this->lookup_name(state.main));
537 this->deactivate(*surface_id);
538 this->surface_set_layout(state.main);
541 this->layout_commit();
542 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
543 compositor::rect area_rect = this->area_info[state.main];
544 this->emit_syncdraw(main.c_str(), str_area.c_str(),
545 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
546 this->enqueue_flushdraw(state.main);
552 bool App::lm_layout_change(const struct WMAction &action)
554 const char *msg = this->check_surface_exist(action.role.c_str());
557 lm_.updateLayout(action);
558 TODO: emit syncDraw with application*/
561 HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), msg);
562 //g_app_list.removeRequest(req_num);
565 this->lm_layout_change(action.role.c_str());
569 bool App::do_transition(unsigned req_num)
574 // get current trigger
575 auto trigger = g_app_list.getRequest(req_num);
576 bool is_activate = true;
578 /* get new status from Policy Manager
580 (json_object*?) newLayout = checkPolicy(trigger);
581 (vector<struct WMAction>&) auto actions = translator.inputActionFromLayout(newLayout, currentLayout)
582 for(const auto& x : actions){
583 g_app_list.setAciton(req_num, x)
588 translator.inputActionFromLayout(newLayout, currentLayout, &g_app_list, req_num);
590 /* The following error check is not necessary because main.cpp will reject the message form not registered object
592 HMI_SEQ_NOTICE(req_num, "ATM, Policy manager does't exist, then set WMAction as is");
594 if (trigger.task == Task::TASK_RELEASE)
598 bool ret = g_app_list.setAction(req_num, trigger.appid, trigger.role, trigger.area, is_activate);
599 g_app_list.reqDump();
603 HMI_SEQ_ERROR(req_num, "Failed to set action");
607 // layer manager task
608 bool sync_draw_happen = false;
609 for (const auto &y : g_app_list.getActions(req_num))
615 but current we can't do do_task,
616 so divide the processing into lm_layout_change and lm_release
620 sync_draw_happen = true;
621 ret = lm_layout_change(y);
624 HMI_SEQ_ERROR(req_num, "Failed layout change: %s", y.appid.c_str());
625 g_app_list.removeRequest(req_num);
627 // TODO: if transition fails, what should we do?
629 /* g_app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
636 HMI_SEQ_ERROR(req_num, "Failed release resource: %s", y.appid.c_str());
637 g_app_list.removeRequest(req_num);
639 // TODO: if transition fails, what should we do?
641 /* g_app_list.lookUpClient(y.appid)->emit_invisible(y.role, y.area); */
647 //this->emit_error(req_num, 0 /*error_num*/, "error happens"); // test
649 else if (ret && sync_draw_happen)
655 g_app_list.removeRequest(req_num); // HACK!!!
660 void App::lm_layout_change(const char *drawing_name)
662 auto const &surface_id = this->lookup_id(drawing_name);
663 auto layer_id = this->layers.get_layer_id(*surface_id);
664 auto o_state = *this->layers.get_layout_state(*surface_id);
665 struct LayoutState &state = *o_state;
667 // disable layers that are above our current layer
668 for (auto const &l : this->layers.mapping)
670 if (l.second.layer_id <= *layer_id)
676 if (l.second.state.main != -1)
678 this->deactivate(l.second.state.main);
679 l.second.state.main = -1;
683 if (l.second.state.sub != -1)
685 this->deactivate(l.second.state.sub);
686 l.second.state.sub = -1;
692 this->layout_commit();
696 auto layer = this->layers.get_layer(*layer_id);
698 if (state.main == -1)
701 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
702 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
703 this->surface_set_layout(*surface_id);
706 // Commit for configuraton
707 this->layout_commit();
709 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
710 compositor::rect area_rect = this->area_info[*surface_id];
711 this->emit_syncdraw(drawing_name, str_area.c_str(),
712 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
713 this->enqueue_flushdraw(state.main);
718 if (0 == strcmp(drawing_name, "HomeScreen"))
721 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
722 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
723 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
724 compositor::rect area_rect = this->area_info[*surface_id];
725 this->emit_syncdraw(drawing_name, str_area.c_str(),
726 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
727 this->enqueue_flushdraw(state.main);
732 bool can_split = this->can_split(state, *surface_id);
738 LayoutState{state.main, *surface_id},
739 [&](LayoutState const &nl) {
740 HMI_DEBUG("wm", "Layout: %s", kNameLayoutSplit);
742 std::move(*this->lookup_name(state.main));
744 this->surface_set_layout(state.main, surface_id);
745 if (state.sub != *surface_id)
749 this->deactivate(state.sub);
754 // Commit for configuration and visibility(0)
755 this->layout_commit();
757 std::string str_area_main = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaMain);
758 std::string str_area_sub = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaSub);
759 compositor::rect area_rect_main = this->area_info[state.main];
760 compositor::rect area_rect_sub = this->area_info[*surface_id];
762 HMI_WARNING("wm", "HACK!!! mediaplayer and hvac is only supported for split");
763 std::string request_role = drawing_name;
764 //std::string request_app = transform(request_role.begin(), request_role.end(), request_role.begin(), tolower); //hvac or mediaplayer
765 std::string hack_appid = "navigation";
766 std::string hack_role = main;
767 std::string hack_area = str_area_main;
768 g_app_list.setAction(g_app_list.currentRequestNumber(), hack_appid, hack_role, hack_area, true);
769 //g_app_list.setEndDrawFinished(g_app_list.currentRequestNumber(), request_role, request_role);
770 //g_app_list.setEndDrawFinished(g_app_list.currentRequestNumber(), hack_appid, hack_role); // This process is illegal
772 this->emit_syncdraw(main.c_str(), str_area_main.c_str(),
773 area_rect_main.x, area_rect_main.y,
774 area_rect_main.w, area_rect_main.h);
775 this->emit_syncdraw(request_role.c_str(), str_area_sub.c_str(),
776 area_rect_sub.x, area_rect_sub.y,
777 area_rect_sub.w, area_rect_sub.h);
778 this->enqueue_flushdraw(state.main);
779 this->enqueue_flushdraw(state.sub);
785 state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
786 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
788 this->surface_set_layout(*surface_id);
789 if (state.main != *surface_id)
791 this->deactivate(state.main);
795 if (state.sub != *surface_id)
797 this->deactivate(state.sub);
802 // Commit for configuraton and visibility(0)
803 this->layout_commit();
805 std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
806 compositor::rect area_rect = this->area_info[*surface_id];
807 this->emit_syncdraw(drawing_name, str_area.c_str(),
808 area_rect.x, area_rect.y, area_rect.w, area_rect.h);
809 this->enqueue_flushdraw(state.main);
816 const char *App::check_surface_exist(const char *drawing_name)
818 auto const &surface_id = this->lookup_id(drawing_name);
821 //reply("Surface does not exist");
822 return "Surface does not exist";
825 if (!this->controller->surface_exists(*surface_id))
827 //reply("Surface does not exist in controller!");
828 return "Surface does not exist in controller!";
831 auto layer_id = this->layers.get_layer_id(*surface_id);
835 //reply("Surface is not on any layer!");
836 return "Surface is not on any layer!";
839 auto o_state = *this->layers.get_layout_state(*surface_id);
841 if (o_state == nullptr)
843 //reply("Could not find layer for surface");
844 return "Could not find layer for surface";
847 HMI_DEBUG("wm", "surface %d is detected", *surface_id);
852 void App::api_activate_surface(char const *appid, char const *drawing_name, char const *drawing_area, const reply_func &reply)
860 std::string id = appid;
861 std::string role = drawing_name;
862 std::string area = drawing_area;
864 if (!g_app_list.contains(id))
866 reply("app doesn't request 'requestSurface' yet");
870 auto client = g_app_list.lookUpClient(id);
875 unsigned current = g_app_list.currentRequestNumber();
876 unsigned requested_num = g_app_list.getRequestNumber(id);
877 if (requested_num != 0)
879 HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", id.c_str(), role.c_str(), area.c_str());
880 reply("already requested");
884 WMRequest req = WMRequest(id, role, area, Task::TASK_ALLOCATE);
885 unsigned new_req = g_app_list.addAllocateRequest(req);
886 g_app_list.reqDump();
888 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", id.c_str(), role.c_str(), area.c_str());
891 if (new_req != current)
893 // Add request, then invoked after the previous task is finished
894 HMI_SEQ_DEBUG(new_req, "request is accepted");
901 bool ret = this->do_transition(new_req);
905 HMI_SEQ_ERROR(new_req, "failed to do_transition");
910 void App::api_deactivate_surface(char const *appid, char const *drawing_name, const reply_func &reply)
917 std::string id = appid;
918 std::string role = drawing_name;
919 std::string area = ""; //drawing_area;
921 if (!g_app_list.contains(id))
923 reply("app doesn't request 'requestSurface' yet");
926 auto client = g_app_list.lookUpClient(id);
931 unsigned current = g_app_list.currentRequestNumber();
932 unsigned requested_num = g_app_list.getRequestNumber(id);
933 if (requested_num != 0)
935 HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", id.c_str(), role.c_str(), area.c_str());
936 reply("already requested");
940 WMRequest req = WMRequest(id, role, area, Task::TASK_RELEASE);
941 unsigned new_req = g_app_list.addAllocateRequest(req);
942 g_app_list.reqDump();
944 HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", id.c_str(), role.c_str(), area.c_str());
947 if (new_req != current)
949 // Add request, then invoked after the previous task is finished
950 HMI_SEQ_DEBUG(new_req, "request is accepted");
957 bool ret = this->do_transition(new_req);
961 HMI_SEQ_ERROR(new_req, "failed to do_transition");
966 void App::enqueue_flushdraw(int surface_id)
968 this->check_flushdraw(surface_id);
969 HMI_DEBUG("wm", "Enqueuing EndDraw for surface_id %d", surface_id);
970 this->pending_end_draw.push_back(surface_id);
973 void App::check_flushdraw(int surface_id)
975 auto i = std::find(std::begin(this->pending_end_draw),
976 std::end(this->pending_end_draw), surface_id);
977 if (i != std::end(this->pending_end_draw))
979 auto n = this->lookup_name(surface_id);
980 HMI_ERROR("wm", "Application %s (%d) has pending EndDraw call(s)!",
981 n ? n->c_str() : "unknown-name", surface_id);
982 std::swap(this->pending_end_draw[std::distance(
983 std::begin(this->pending_end_draw), i)],
984 this->pending_end_draw.back());
985 this->pending_end_draw.resize(this->pending_end_draw.size() - 1);
989 void App::lm_enddraw(const char *drawing_name)
991 HMI_DEBUG("wm", "end draw %s", drawing_name);
992 for (unsigned i = 0, iend = this->pending_end_draw.size(); i < iend; i++)
994 auto n = this->lookup_name(this->pending_end_draw[i]);
995 if (n && *n == drawing_name)
997 std::swap(this->pending_end_draw[i], this->pending_end_draw[iend - 1]);
998 this->pending_end_draw.resize(iend - 1);
999 this->activate(this->pending_end_draw[i]);
1000 this->emit_flushdraw(drawing_name);
1005 void App::do_enddraw(unsigned req_num)
1008 auto actions = g_app_list.getActions(req_num);
1009 HMI_SEQ_INFO(req_num, "do endDraw");
1011 for (const auto &act : actions)
1013 HMI_SEQ_DEBUG(req_num, "visible %s", act.role.c_str());
1014 this->lm_enddraw(act.role.c_str());
1017 HMI_SEQ_INFO(req_num, "emit flushDraw");
1021 //emitFlushDrawToAll(&g_app_list, req_num);
1022 // emit status change event
1023 } while (!g_app_list.requestFinished());*/
1026 void App::process_request()
1028 unsigned req = g_app_list.currentRequestNumber();
1029 HMI_SEQ_DEBUG(req, "Do next request");
1033 void App::api_enddraw(char const *appid, char const *drawing_name)
1035 std::string id(appid);
1036 std::string role(drawing_name);
1037 unsigned current_req = g_app_list.currentRequestNumber();
1038 bool result = g_app_list.setEndDrawFinished(current_req, id, role);
1042 HMI_ERROR("wm", "%s doesn't have Window Resource", id.c_str());
1046 if (g_app_list.endDrawFullfilled(current_req))
1048 // do task for endDraw
1049 //this->stop_timer();
1050 this->do_enddraw(current_req);
1054 g_app_list.removeRequest(current_req);
1055 HMI_SEQ_INFO(current_req, "Finish request");
1057 if (g_app_list.haveRequest())
1059 this->process_request();
1064 HMI_SEQ_INFO(current_req, "Wait other App call endDraw");
1069 void App::api_ping() { this->dispatch_pending_events(); }
1071 void App::send_event(char const *evname, char const *label)
1073 HMI_DEBUG("wm", "%s: %s(%s)", __func__, evname, label);
1075 json_object *j = json_object_new_object();
1076 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
1078 int ret = afb_event_push(this->map_afb_event[evname], j);
1081 HMI_DEBUG("wm", "afb_event_push failed: %m");
1085 void App::send_event(char const *evname, char const *label, char const *area,
1086 int x, int y, int w, int h)
1088 HMI_DEBUG("wm", "%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
1089 __func__, evname, label, area, x, y, w, h);
1091 json_object *j_rect = json_object_new_object();
1092 json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
1093 json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
1094 json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
1095 json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));
1097 json_object *j = json_object_new_object();
1098 json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
1099 json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
1100 json_object_object_add(j, kKeyDrawingRect, j_rect);
1102 int ret = afb_event_push(this->map_afb_event[evname], j);
1105 HMI_DEBUG("wm", "afb_event_push failed: %m");
1112 void App::surface_created(uint32_t surface_id)
1114 auto layer_id = this->layers.get_layer_id(surface_id);
1117 HMI_DEBUG("wm", "Newly created surfce %d is not associated with any layer!",
1122 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface_id, *layer_id);
1124 this->controller->layers[*layer_id]->add_surface(surface_id);
1125 this->layout_commit();
1126 // activate the main_surface right away
1127 /*if (surface_id == static_cast<unsigned>(this->layers.main_surface)) {
1128 HMI_DEBUG("wm", "Activating main_surface (%d)", surface_id);
1130 this->api_activate_surface(
1131 this->lookup_name(surface_id).value_or("unknown-name").c_str());
1134 // search pid from surfaceID
1136 // pick up appid from pid from application manager
1138 // check appid then add it to the client
1141 void App::surface_removed(uint32_t surface_id)
1143 HMI_DEBUG("wm", "surface_id is %u", surface_id);
1145 g_app_list.removeSurface(surface_id);
1148 void App::emit_activated(char const *label)
1150 this->send_event(kListEventName[Event_Active], label);
1153 void App::emit_deactivated(char const *label)
1155 this->send_event(kListEventName[Event_Inactive], label);
1158 void App::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
1160 this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
1163 void App::emit_flushdraw(char const *label)
1165 this->send_event(kListEventName[Event_FlushDraw], label);
1168 void App::emit_visible(char const *label, bool is_visible)
1170 this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
1173 void App::emit_invisible(char const *label)
1175 return emit_visible(label, false);
1178 void App::emit_visible(char const *label) { return emit_visible(label, true); }
1180 result<int> App::api_request_surface(char const *appid, char const *drawing_name)
1182 auto lid = this->layers.get_layer_id(std::string(drawing_name));
1186 * register drawing_name as fallback and make it displayed.
1188 lid = this->layers.get_layer_id(std::string("Fallback"));
1189 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
1192 return Err<int>("Drawing name does not match any role, Fallback is disabled");
1196 auto rname = this->lookup_id(drawing_name);
1199 // name does not exist yet, allocate surface id...
1200 auto id = int(this->id_alloc.generate_id(drawing_name));
1201 this->layers.add_surface(id, *lid);
1203 // set the main_surface[_name] here and now
1204 if (!this->layers.main_surface_name.empty() &&
1205 this->layers.main_surface_name == drawing_name)
1207 this->layers.main_surface = id;
1208 HMI_DEBUG("wm", "Set main_surface id to %u", id);
1211 // add client into the db
1212 std::string appid_str(appid);
1213 std::string role(drawing_name);
1214 //g_app_list.addClient(appid_str, role);
1215 g_app_list.addClient(appid_str, *lid, id, role);
1220 // Check currently registered drawing names if it is already there.
1221 return Err<int>("Surface already present");
1224 char const *App::api_request_surface(char const *appid, char const *drawing_name,
1229 auto lid = this->layers.get_layer_id(std::string(drawing_name));
1230 unsigned sid = std::stol(ivi_id);
1235 * register drawing_name as fallback and make it displayed.
1237 lid = this->layers.get_layer_id(std::string("Fallback"));
1238 HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
1241 return "Drawing name does not match any role, Fallback is disabled";
1245 auto rname = this->lookup_id(drawing_name);
1249 return "Surface already present";
1252 // register pair drawing_name and ivi_id
1253 this->id_alloc.register_name_id(drawing_name, sid);
1254 this->layers.add_surface(sid, *lid);
1256 // this surface is already created
1257 HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", sid, *lid);
1259 this->controller->layers[*lid]->add_surface(sid);
1260 this->layout_commit();
1265 result<json_object *> App::api_get_display_info()
1268 if (!this->controller)
1270 return Err<json_object *>("ivi_controller global not available");
1274 compositor::size o_size = this->controller->output_size;
1275 compositor::size p_size = this->controller->physical_size;
1277 json_object *object = json_object_new_object();
1278 json_object_object_add(object, kKeyWidthPixel, json_object_new_int(o_size.w));
1279 json_object_object_add(object, kKeyHeightPixel, json_object_new_int(o_size.h));
1280 json_object_object_add(object, kKeyWidthMm, json_object_new_int(p_size.w));
1281 json_object_object_add(object, kKeyHeightMm, json_object_new_int(p_size.h));
1283 return Ok<json_object *>(object);
1286 result<json_object *> App::api_get_area_info(char const *drawing_name)
1288 HMI_DEBUG("wm", "called");
1290 // Check drawing name, surface/layer id
1291 auto const &surface_id = this->lookup_id(drawing_name);
1294 return Err<json_object *>("Surface does not exist");
1297 if (!this->controller->surface_exists(*surface_id))
1299 return Err<json_object *>("Surface does not exist in controller!");
1302 auto layer_id = this->layers.get_layer_id(*surface_id);
1305 return Err<json_object *>("Surface is not on any layer!");
1308 auto o_state = *this->layers.get_layout_state(*surface_id);
1309 if (o_state == nullptr)
1311 return Err<json_object *>("Could not find layer for surface");
1314 struct LayoutState &state = *o_state;
1315 if ((state.main != *surface_id) && (state.sub != *surface_id))
1317 return Err<json_object *>("Surface is inactive");
1320 // Set area rectangle
1321 compositor::rect area_info = this->area_info[*surface_id];
1322 json_object *object = json_object_new_object();
1323 json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
1324 json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
1325 json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
1326 json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));
1328 return Ok<json_object *>(object);
1331 void App::activate(int id)
1333 auto ip = this->controller->sprops.find(id);
1334 if (ip != this->controller->sprops.end())
1336 this->controller->surfaces[id]->set_visibility(1);
1338 this->lookup_name(id).value_or("unknown-name").c_str();
1341 if ((0 == strcmp(label, "Radio")) || (0 == strcmp(label, "MediaPlayer")) || (0 == strcmp(label, "Music")) || (0 == strcmp(label, "Navigation")))
1343 for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
1348 this->surface_bg.erase(i);
1350 // Remove from BG layer (999)
1351 HMI_DEBUG("wm", "Remove %s(%d) from BG layer", label, id);
1352 this->controller->layers[999]->remove_surface(id);
1354 // Add to FG layer (1001)
1355 HMI_DEBUG("wm", "Add %s(%d) to FG layer", label, id);
1356 this->controller->layers[1001]->add_surface(id);
1358 for (int j : this->surface_bg)
1360 HMI_DEBUG("wm", "Stored id:%d", j);
1367 this->layout_commit();
1369 this->emit_visible(label);
1370 this->emit_activated(label);
1374 void App::deactivate(int id)
1376 auto ip = this->controller->sprops.find(id);
1377 if (ip != this->controller->sprops.end())
1380 this->lookup_name(id).value_or("unknown-name").c_str();
1383 if ((0 == strcmp(label, "Radio")) || (0 == strcmp(label, "MediaPlayer")) || (0 == strcmp(label, "Music")) || (0 == strcmp(label, "Navigation")))
1387 this->surface_bg.push_back(id);
1389 // Remove from FG layer (1001)
1390 HMI_DEBUG("wm", "Remove %s(%d) from FG layer", label, id);
1391 this->controller->layers[1001]->remove_surface(id);
1393 // Add to BG layer (999)
1394 HMI_DEBUG("wm", "Add %s(%d) to BG layer", label, id);
1395 this->controller->layers[999]->add_surface(id);
1397 for (int j : surface_bg)
1399 HMI_DEBUG("wm", "Stored id:%d", j);
1404 this->controller->surfaces[id]->set_visibility(0);
1408 this->emit_deactivated(label);
1409 this->emit_invisible(label);
1413 void App::deactivate_main_surface()
1415 this->layers.main_surface = -1;
1416 std::string appid = "HomeScreen";
1417 this->api_deactivate_surface(appid.c_str(), this->layers.main_surface_name.c_str(), [](const char *) {});
1420 bool App::can_split(struct LayoutState const &state, int new_id)
1422 if (state.main != -1 && state.main != new_id)
1424 auto new_id_layer = this->layers.get_layer_id(new_id).value();
1425 auto current_id_layer = this->layers.get_layer_id(state.main).value();
1427 // surfaces are on separate layers, don't bother.
1428 if (new_id_layer != current_id_layer)
1433 std::string const &new_id_str = this->lookup_name(new_id).value();
1434 std::string const &cur_id_str = this->lookup_name(state.main).value();
1436 auto const &layer = this->layers.get_layer(new_id_layer);
1438 HMI_DEBUG("wm", "layer info name: %s", layer->name.c_str());
1440 if (layer->layouts.empty())
1445 for (auto i = layer->layouts.cbegin(); i != layer->layouts.cend(); i++)
1447 HMI_DEBUG("wm", "%d main_match '%s'", new_id_layer, i->main_match.c_str());
1448 auto rem = std::regex(i->main_match);
1449 if (std::regex_match(cur_id_str, rem))
1451 // build the second one only if the first already matched
1452 HMI_DEBUG("wm", "%d sub_match '%s'", new_id_layer, i->sub_match.c_str());
1453 auto res = std::regex(i->sub_match);
1454 if (std::regex_match(new_id_str, res))
1456 HMI_DEBUG("wm", "layout matched!");
1466 void App::try_layout(struct LayoutState & /*state*/,
1467 struct LayoutState const &new_layout,
1468 std::function<void(LayoutState const &nl)> apply)
1470 if (this->policy.layout_is_valid(new_layout))
1479 void controller_hooks::surface_created(uint32_t surface_id)
1481 this->app->surface_created(surface_id);
1484 void controller_hooks::surface_removed(uint32_t surface_id)
1486 this->app->surface_removed(surface_id);
1489 void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
1492 void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,