meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend

   1 DISABLE_OVERSCAN = "1"
   2 TOTAL_BOARD_MEM = "3072"
   3
   4 do_deploy_append_raspberrypi4() {
   5     # ENABLE CAN
   6     if [ "${ENABLE_CAN}" = "1" ]; then
   7         echo "# Enable CAN" >>${DEPLOYDIR}/bootfiles/config.txt
   8         echo "dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25" >>${DEPLOYDIR}/bootfiles/config.txt
   9     fi
  10
  11     # Handle setup with armstub file
  12     if [ -n "${ARMSTUB}" ]; then
  13         echo "\n# ARM stub configuration" >> ${DEPLOYDIR}/bootfiles/config.txt
  14         echo "armstub=${ARMSTUB}" >> ${DEPLOYDIR}/bootfiles/config.txt
  15         case "${ARMSTUB}" in
  16             *-gic.bin)
  17                 echo  "enable_gic=1" >> ${DEPLOYDIR}/bootfiles/config.txt
  18                 ;;
  19         esac
  20     fi
  21
  22     if [ "${AGL_XEN_WANTED}" = "1" ]; then
  23         echo "total_mem=${TOTAL_BOARD_MEM}" >> ${DEPLOYDIR}/bootfiles/config.txt
  24     fi
  25 }
  26
  27 do_deploy_append() {
  28     if [ "${ENABLE_CMA}" = "1" ] && [ -n "${CMA_LWM}" ]; then
  29         sed -i '/#cma_lwm/ c\cma_lwm=${CMA_LWM}' ${DEPLOYDIR}/bootfiles/config.txt
  30     fi
  31
  32     if [ "${ENABLE_CMA}" = "1" ] && [ -n "${CMA_HWM}" ]; then
  33         sed -i '/#cma_hwm/ c\cma_hwm=${CMA_HWM}' ${DEPLOYDIR}/bootfiles/config.txt
  34     fi
  35
  36     echo "avoid_warnings=2" >> ${DEPLOYDIR}/bootfiles/config.txt
  37     echo "mask_gpu_interrupt0=0x400" >> ${DEPLOYDIR}/bootfiles/config.txt
  38     echo "dtoverlay=vc4-kms-v3d-overlay,cma-256" >> ${DEPLOYDIR}/bootfiles/config.txt
  39     echo "dtoverlay=rpi-ft5406-overlay" >> ${DEPLOYDIR}/bootfiles/config.txt
  40     echo "dtparam=audio=on" >> ${DEPLOYDIR}/bootfiles/config.txt
  41 }
  42
  43 do_deploy_append_raspberrypi4() {
  44     echo -e "\n[pi4]" >> ${DEPLOYDIR}/bootfiles/config.txt
  45     echo "max_framebuffers=2" >> ${DEPLOYDIR}/bootfiles/config.txt
  46 }
  47
  48 do_deploy_append_sota() {
  49     echo "device_tree_address=0x0c800000" >> ${DEPLOYDIR}/bootfiles/config.txt
  50 }
  51
  52 ENABLE_UART_raspberrypi3 = "1"
  53 ENABLE_UART_raspberrypi4 = "1"