[apps/agl-service-can-low-level.git] / low-can-binding / diagnostic / diagnostic-manager.cpp

/*
 * Copyright (C) 2015, 2016 "IoT.bzh"
 * Author "Romain Forlot" <romain.forlot@iot.bzh>
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *       http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <systemd/sd-event.h>
#include <algorithm>
#include <string.h>

#include "diagnostic-manager.hpp"

#include "../utils/openxc-utils.hpp"
#include "../utils/signals.hpp"
#include "../binding/application.hpp"

#define MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ 10
#define MAX_SIMULTANEOUS_DIAG_REQUESTS 50
// There are only 8 slots of in flight diagnostic requests
#define MAX_SIMULTANEOUS_IN_FLIGHT_REQUESTS 8
#define TIMERFD_ACCURACY 0
#define MICRO 1000000

diagnostic_manager_t::diagnostic_manager_t()
        : initialized_{false}
{}


diagnostic_manager_t::~diagnostic_manager_t()
{
        for(auto r: recurring_requests_)
        {
                delete(r);
        }
        for(auto r: non_recurring_requests_)
        {
                delete(r);
        }
}

/// @brief Diagnostic manager is not initialized at launch but after
///  the initialization of CAN bus devices. For the moment, it is only possible
///  to have 1 diagnostic bus which are the first bus declared in the JSON
///  description file. Configuration instance will return it.
///
/// this will initialize DiagnosticShims and cancel all active requests
///  if there are any.
bool diagnostic_manager_t::initialize()
{
        // Mandatory to set the bus before intialize shims.
        bus_ = application_t::instance().get_diagnostic_bus();

        init_diagnostic_shims();
        reset();

        initialized_ = true;
        AFB_DEBUG("Diagnostic Manager initialized");
        return initialized_;
}

/// @brief initialize shims used by UDS lib and set initialized_ to true.
///  It is needed before used the diagnostic manager fully because shims are
///  required by most member functions.
void diagnostic_manager_t::init_diagnostic_shims()
{
        shims_ = diagnostic_init_shims(shims_logger, shims_send, NULL);
        AFB_DEBUG("Shims initialized");
}

/// @brief Force cleanup all active requests.
void diagnostic_manager_t::reset()
{
        AFB_DEBUG("Clearing existing diagnostic requests");
        cleanup_active_requests(true);
}

/// @brief send function use by diagnostic library. It will open a BCM CAN socket TX_SETUP type.
/// That socket will send cyclic messages configured from a diagnostic request.
///
/// @param[in] arbitration_id - CAN arbitration ID to use when send message. OBD2 broadcast ID
///  is 0x7DF by example.
/// @param[in] data - The data payload for the message. NULL is valid if size is also 0.
/// @param[in] size - The size of the data payload, in bytes.
///
/// @return true if the CAN message was sent successfully.
bool diagnostic_manager_t::shims_send(const uint32_t arbitration_id, const uint8_t* data, const uint8_t size)
{
        diagnostic_manager_t& dm = application_t::instance().get_diagnostic_manager();
        active_diagnostic_request_t* current_adr = dm.get_last_recurring_requests();
        utils::socketcan_bcm_t& tx_socket = current_adr->get_socket();

        // Make sure that socket has been opened.
        if(! tx_socket)
                tx_socket.open(dm.get_bus_device_name());

        struct bcm_msg bcm_msg;
        struct can_frame cf;

        struct timeval freq = current_adr->get_frequency_clock().get_timeval_from_period();

        bcm_msg.msg_head.opcode  = TX_SETUP;
        bcm_msg.msg_head.can_id  = arbitration_id;
        bcm_msg.msg_head.flags = SETTIMER|STARTTIMER|TX_CP_CAN_ID;
        bcm_msg.msg_head.count = 0;
        bcm_msg.msg_head.ival2.tv_sec = freq.tv_sec;
        bcm_msg.msg_head.ival2.tv_usec = freq.tv_usec;
        bcm_msg.msg_head.nframes = 1;
        cf.can_dlc = size;

        ::memset(cf.data, 0, sizeof(cf.data));
        ::memcpy(cf.data, data, size);

        bcm_msg.frames[0] = cf;


        can_message_t msg = can_message_t();

        msg.set_bcm_msg(bcm_msg);

        tx_socket.write_message(msg);
        if(tx_socket)
                return true;
        return false;
}

/// @brief The type signature for an optional logging function, if the user
/// wishes to provide one. It should print, store or otherwise display the
/// message.
///
/// message - A format string to log using the given parameters.
/// ... (vargs) - the parameters for the format string.
///
void diagnostic_manager_t::shims_logger(const char* format, ...)
{
        va_list args;
        va_start(args, format);

        char buffer[256];
        vsnprintf(buffer, 256, format, args);

        AFB_DEBUG("%s", buffer);
        va_end(args);
}

const std::string diagnostic_manager_t::get_bus_name() const
{
        return bus_;
}

const std::string diagnostic_manager_t::get_bus_device_name() const
{
        return application_t::instance().get_can_bus_manager()
                .get_can_device_name(bus_);
}

active_diagnostic_request_t* diagnostic_manager_t::get_last_recurring_requests() const
{
        return recurring_requests_.back();
}

/// @brief Return diagnostic manager shims member.
DiagnosticShims& diagnostic_manager_t::get_shims()
{
        return shims_;
}

/// @brief Search for a specific active diagnostic request in the provided requests list
/// and erase it from the vector. This is useful at unsubscription to clean up the list otherwize
/// all received CAN messages will be passed to DiagnosticRequestHandle of all active diagnostic request
/// contained in the vector but no event if connected to, so we will decode uneeded request.
///
/// @param[in] entry - a pointer of an active_diagnostic_request instance to clean up
/// @param[in] requests_list - a vector where to make the search and cleaning.
void diagnostic_manager_t::find_and_erase(active_diagnostic_request_t* entry, std::vector<active_diagnostic_request_t*>& requests_list)
{
        auto i = std::find(requests_list.begin(), requests_list.end(), entry);
        if ( i != requests_list.end())
                requests_list.erase(i);
}

/// @brief Free memory allocated on active_diagnostic_request_t object and close the socket.
void diagnostic_manager_t::cancel_request(active_diagnostic_request_t* entry)
{
        entry->get_socket().close();
        delete entry;
        entry = nullptr;
}

/// @brief Cleanup a specific request if it isn't running and get complete. As it is almost
/// impossible to get that state for a recurring request without waiting for that, you can
/// force the cleaning operation.
///
/// @param[in] entry - the request to clean
/// @param[in] force - Force the cleaning or not ?
void diagnostic_manager_t::cleanup_request(active_diagnostic_request_t* entry, bool force)
{
        if(entry != nullptr && (force || entry->response_received()))
        {
                char request_string[128] = {0};
                diagnostic_request_to_string(&entry->get_handle()->request,
                        request_string, sizeof(request_string));
                if(force && entry->get_recurring())
                {
                        cancel_request(entry);
                        find_and_erase(entry, recurring_requests_);
                        AFB_DEBUG("Cancelling completed, recurring request: %s", request_string);
                }
                else if (!entry->get_recurring())
                {
                        AFB_DEBUG("Cancelling completed, non-recurring request: %s", request_string);
                        cancel_request(entry);
                        find_and_erase(entry, non_recurring_requests_);
                }
        }
}

/// @brief Clean up all requests lists, recurring and not recurring.
///
/// @param[in] force - Force the cleaning or not ? If true, that will do
/// the same effect as a call to reset().
void diagnostic_manager_t::cleanup_active_requests(bool force)
{
        for(auto& entry : non_recurring_requests_)
        {
                if (entry != nullptr)
                        cleanup_request(entry, force);
        }

        for(auto& entry : recurring_requests_)
         {
                if (entry != nullptr)
                        cleanup_request(entry, force);
         }
}

/// @brief Will return the active_diagnostic_request_t pointer for theDiagnosticRequest or nullptr if
/// not found.
///
/// @param[in] request - Search key, method will go through recurring list to see if it find that request
///  holded by the DiagnosticHandle member.
active_diagnostic_request_t* diagnostic_manager_t::find_recurring_request(DiagnosticRequest& request)
{
        for (auto& entry : recurring_requests_)
        {
                if(entry != nullptr)
                {
                        if(diagnostic_request_equals(&entry->get_handle()->request, &request))
                                {return entry;}
                }
        }
        return nullptr;
}
/*
/// @brief Add and send a new one-time diagnostic request. DON'T USED AT THIS TIME
///
/// A one-time (aka non-recurring) request can existing in parallel with a
/// recurring request for the same PID or mode, that's not a problem.
///
/// For an example, see the docs for addRecurringRequest. This function is very
/// similar but leaves out the frequencyHz parameter.
///
/// @param[in] request - The parameters for the request.
/// @param[in] name - Human readable name this response, to be used when
///      publishing received responses.
/// @param[in] wait_for_multiple_responses - If false, When any response is received
///      for this request it will be removed from the active list. If true, the
///      request will remain active until the timeout clock expires, to allow it
///      to receive multiple response. Functional broadcast requests will always
///      waint for the timeout, regardless of this parameter.
/// @param[in] decoder - An optional DiagnosticResponseDecoder to parse the payload of
///      responses to this request. If the decoder is NULL, the output will
///      include the raw payload instead of a parsed value.
/// @param[in] callback - An optional DiagnosticResponseCallback to be notified whenever a
///      response is received for this request.
///
/// @return true if the request was added successfully. Returns false if there
/// wasn't a free active request entry.
active_diagnostic_request_t* diagnostic_manager_t::add_request(DiagnosticRequest* request, const std::string& name,
        bool wait_for_multiple_responses, const DiagnosticResponseDecoder decoder,
        const DiagnosticResponseCallback callback)
{
        cleanup_active_requests(false);

        active_diagnostic_request_t* entry = nullptr;

        if (non_recurring_requests_.size() <= MAX_SIMULTANEOUS_DIAG_REQUESTS)
        {
                active_diagnostic_request_t* entry = new active_diagnostic_request_t(bus_, request->arbitration_id, name,
                                wait_for_multiple_responses, decoder, callback, 0, false);
                entry->set_handle(shims_, request);

                char request_string[128] = {0};
                diagnostic_request_to_string(&entry->get_handle()->request, request_string,
                                sizeof(request_string));

                // Erase any existing request not already cleaned.
                cleanup_request(entry, true);
                AFB_DEBUG("Added one-time diagnostic request on bus %s: %s",
                                bus_.c_str(), request_string);

                non_recurring_requests_.push_back(entry);
        }
        else
        {
                AFB_WARNING("There isn't enough request entry. Vector exhausted %d/%d", (int)non_recurring_requests_.size(), MAX_SIMULTANEOUS_DIAG_REQUESTS);
                non_recurring_requests_.resize(MAX_SIMULTANEOUS_DIAG_REQUESTS);
        }
        return entry;
}
*/
/// @brief Validate frequency asked don't get higher than the maximum of a classical
/// CAN bus OBD2 request.
///
/// @param[in] frequencyHz - frequency asked for sending diagnostic requests.
///
/// @return True if frequency is below the Maximum false if not.
bool diagnostic_manager_t::validate_optional_request_attributes(float frequencyHz)
{
        if(frequencyHz > MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ) {
                AFB_DEBUG("Requested recurring diagnostic frequency %lf is higher than maximum of %d",
                        frequencyHz, MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ);
                return false;
        }
        return true;
}

/// @brief Add and send a new recurring diagnostic request.
///
/// At most one recurring request can be active for the same arbitration ID, mode
/// and (if set) PID on the same bus at one time. If you try and call
/// add_recurring_request with the same key, it will return an error.
///
/// @param[in] request - The parameters for the request.
/// @param[in] name - An optional human readable name this response, to be used when
///      publishing received responses. If the name is NULL, the published output
///      will use the raw OBD-II response format.
/// @param[in] wait_for_multiple_responses - If false, When any response is received
///      for this request it will be removed from the active list. If true, the
///      request will remain active until the timeout clock expires, to allow it
///      to receive multiple response. Functional broadcast requests will always
///      waint for the timeout, regardless of this parameter.
/// @param[in] decoder - An optional DiagnosticResponseDecoder to parse the payload of
///      responses to this request. If the decoder is NULL, the output will
///      include the raw payload instead of a parsed value.
/// @param[in] callback - An optional DiagnosticResponseCallback to be notified whenever a
///      response is received for this request.
/// @param[in] frequencyHz - The frequency (in Hz) to send the request. A frequency above
///      MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ is not allowed, and will make this
///      function return false.
///
/// @return true if the request was added successfully. Returns false if there
/// was too much already running requests, or if the frequency was too high.
active_diagnostic_request_t* diagnostic_manager_t::add_recurring_request(DiagnosticRequest* request, const char* name,
                bool wait_for_multiple_responses, const DiagnosticResponseDecoder decoder,
                const DiagnosticResponseCallback callback, float frequencyHz, bool permanent)
{
        active_diagnostic_request_t* entry = nullptr;

        if(!validate_optional_request_attributes(frequencyHz))
                return entry;

        cleanup_active_requests(false);

        if(find_recurring_request(*request) == nullptr)
        {
                if(recurring_requests_.size() <= MAX_SIMULTANEOUS_DIAG_REQUESTS)
                {
                        entry = new active_diagnostic_request_t(bus_, request->arbitration_id, name,
                                        wait_for_multiple_responses, decoder, callback, frequencyHz, permanent);
                        recurring_requests_.push_back(entry);

                        entry->set_handle(shims_, request);
                        start_diagnostic_request(&shims_, entry->get_handle());
                }
                else
                {
                        AFB_WARNING("There isn't enough request entry. Vector exhausted %d/%d", (int)recurring_requests_.size(), MAX_SIMULTANEOUS_DIAG_REQUESTS);
                        recurring_requests_.resize(MAX_SIMULTANEOUS_DIAG_REQUESTS);
                }
        }
        else
                { AFB_DEBUG("Can't add request, one already exists with same key");}
        return entry;
}

/// @brief Will decode the diagnostic response and build the final openxc_VehicleMessage to return.
///
/// @param[in] adr - A pointer to an active diagnostic request holding a valid diagnostic handle
/// @param[in] response - The response to decode from which the Vehicle message will be built and returned
///
/// @return A filled openxc_VehicleMessage or a zeroed struct if there is an error.
openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_response(active_diagnostic_request_t* adr, const DiagnosticResponse& response, const uint64_t timestamp)
{
        openxc_VehicleMessage message = build_VehicleMessage();
        float value = (float)diagnostic_payload_to_integer(&response);

        struct utils::signals_found found_signals;
        found_signals = utils::signals_manager_t::instance().find_signals(build_DynamicField((double) adr->get_pid()));

        if(adr->get_decoder() != nullptr)
        {
                value = adr->get_decoder()(&response, value);
        }

        if((response.success && adr->get_name().size()) > 0)
        {
                // If name, include 'value' instead of payload, and leave of response
                // details.
                message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField(value)));
                message.has_diagnostic_response = true;
                message.diagnostic_response = build_VehicleMessage(adr, response, value).diagnostic_response;
        }
        else
        {
                // If no name, only send full details of response but still include 'value'
                // instead of 'payload' if they provided a decoder. The one case you
                // can't get is the full detailed response with 'value'. We could add
                // another parameter for that but it's onerous to carry that around.
                message = build_VehicleMessage(adr, response, value);
        }

        // If not success but completed then the pid isn't supported
        if(!response.success)
        {
                found_signals.diagnostic_messages.front()->set_supported(false);
                cleanup_request(adr, true);
                AFB_NOTICE("PID not supported or ill formed. Please unsubscribe from it. Error code : %d", response.negative_response_code);
                message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField("This PID isn't supported by your vehicle.")));
        }

        if(adr->get_callback() != nullptr)
        {
                adr->get_callback()(adr, &response, value);
        }

        // Reset the completed flag handle to make sure that it will be reprocessed the next time.
        adr->get_handle()->success = false;

        // Save value and timestamp of diagnostic message
        if(!found_signals.diagnostic_messages.empty())
        {
                // Then, for each diag_message found
                for(const auto& diag_mess: found_signals.diagnostic_messages)
                {
                        // Save value and timestamp for this message
                        diag_mess->set_received(true);
                        diag_mess->set_last_value(value);
                        diag_mess->set_timestamp(timestamp);
                }
        }

        return message;
}

/// @brief Will take the CAN message and pass it to the receive functions that will process
/// diagnostic handle for each active diagnostic request then depending on the result we will
/// return pass the diagnostic response to decode it.
///
/// @param[in] entry - A pointer to an active diagnostic request holding a valid diagnostic handle
/// @param[in] cm - A raw CAN message.
///
/// @return A pointer to a filled openxc_VehicleMessage or a nullptr if nothing has been found.
openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_handle(active_diagnostic_request_t* entry, std::shared_ptr<message_t> m)
{
        DiagnosticResponse response = diagnostic_receive_can_frame(&shims_, entry->get_handle(), m->get_id(), m->get_data(), (uint8_t)m->get_length());
        if(response.completed && entry->get_handle()->completed)
        {
                if(entry->get_handle()->success)
                        return relay_diagnostic_response(entry, response, m->get_timestamp());
        }
        else if(!response.completed && response.multi_frame)
        {
                // Reset the timeout clock while completing the multi-frame receive
                entry->get_timeout_clock().tick(
                        entry->get_timeout_clock().get_time_function()());
        }

        return build_VehicleMessage();
}

/// @brief Find the active diagnostic request with the correct DiagnosticRequestHandle
/// member that will understand the CAN message using diagnostic_receive_can_frame function
/// from UDS-C library. Then decode it with an ad-hoc method.
///
/// @param[in] cm - Raw CAN message received
///
/// @return VehicleMessage with decoded value.
openxc_VehicleMessage diagnostic_manager_t::find_and_decode_adr(std::shared_ptr<message_t> m)
{
        openxc_VehicleMessage vehicle_message = build_VehicleMessage();

        for ( auto entry : non_recurring_requests_)
        {
                vehicle_message = relay_diagnostic_handle(entry, m);
                if (is_valid(vehicle_message))
                        return vehicle_message;
        }

        for ( auto entry : recurring_requests_)
        {
                vehicle_message = relay_diagnostic_handle(entry, m);
                if (is_valid(vehicle_message))
                        return vehicle_message;
        }

        return vehicle_message;
}

/// @brief Tell if the CAN message received is a diagnostic response.
/// Request broadcast ID use 0x7DF and assigned ID goes from 0x7E0 to Ox7E7. That allows up to 8 ECU to respond
/// at the same time. The response is the assigned ID + 0x8, so response ID can goes from 0x7E8 to 0x7EF.
///
/// @param[in] cm - CAN message received from the socket.
///
/// @return True if the active diagnostic request match the response.
bool diagnostic_manager_t::is_diagnostic_response(std::shared_ptr<message_t> m)
{
        if(m->get_flags()&STANDARD_ID || m->get_flags()&EXTENDED_ID)
        {
                if (m->get_id() >= 0x7e8 && m->get_id() <= 0x7ef)
                                return true;
        }
        return false;
}