ll-database-binding/conf.d/app-templates/cmake/cmake.d/04-extra_targets.cmake

   1 ###########################################################################
   2 # Copyright 2015, 2016, 2017 IoT.bzh
   3 #
   4 # author: Fulup Ar Foll <fulup@iot.bzh>
   5 # contrib: Romain Forlot <romain.forlot@iot.bzh>
   6 #
   7 # Licensed under the Apache License, Version 2.0 (the "License");
   8 # you may not use this file except in compliance with the License.
   9 # You may obtain a copy of the License at
  10 #
  11 #     http://www.apache.org/licenses/LICENSE-2.0
  12 #
  13 # Unless required by applicable law or agreed to in writing, software
  14 # distributed under the License is distributed on an "AS IS" BASIS,
  15 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 # See the License for the specific language governing permissions and
  17 # limitations under the License.
  18 ###########################################################################
  19
  20
  21 #--------------------------------------------------------------------------
  22 #  WARNING:
  23 #     Do not change this cmake template
  24 #     Customise your preferences in "./conf.d/cmake/config.cmake"
  25 #--------------------------------------------------------------------------
  26
  27 # ----------------------------------------------------------------------------
  28 #                                Archive target
  29 # ----------------------------------------------------------------------------
  30 #add_custom_command(OUTPUT  ${ARCHIVE_OUTPUT}
  31 #       DEPENDS ${PROJECT_TARGETS}
  32 #       #Create git archive of the main project
  33 #       COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git archive --format=tar --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/ HEAD -o ${ARCHIVE_OUTPUT_ARCHIVE}
  34 #       #Create tmp git archive for each submodule
  35 #       COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git submodule foreach --recursive ${CMD_ARCHIVE_SUBMODULE}
  36 #       #Concatenate main archive and tmp submodule archive
  37 #       COMMAND  for SUBTAR in ${TMP_ARCHIVE_SUBMODULE}-*.tar\; do tar --concatenate --file=${ARCHIVE_OUTPUT_ARCHIVE} $$SUBTAR\;done
  38 #       #Remove tmp submodule archive
  39 #       COMMAND rm -rf ${TMP_ARCHIVE_SUBMODULE}-*.tar
  40 #       #Compress main archive
  41 #       COMMAND gzip --force --verbose ${ARCHIVE_OUTPUT_ARCHIVE}
  42 #)
  43 #add_custom_target(archive DEPENDS ${ARCHIVE_OUTPUT})
  44
  45 # ----------------------------------------------------------------------------
  46 #                                Packaging target
  47 # ----------------------------------------------------------------------------
  48 #Format Build require package
  49 #foreach (PKG_CONFIG ${PKG_REQUIRED_LIST})
  50 #       #Unset TMP variable
  51 #       unset(XPREFIX)
  52 #       unset(XRULE)
  53 #       unset(RPM_EXTRA_DEP)
  54 #       unset(DEB_EXTRA_DEP)
  55 #       #For deb package,add EOL format only for a new line
  56 #       if(DEB_PKG_DEPS)
  57 #               set(DEB_PKG_DEPS "${DEB_PKG_DEPS},\n")
  58 #       endif()
  59 #       #Get pkg-config rule on version
  60 #       string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG})
  61 #       string(REGEX MATCH "[<>]?="  XRULE ${PKG_CONFIG})
  62 #       #Only if pkg-config has rule on version
  63 #       if(XRULE)
  64 #               string(REGEX REPLACE ".*[<>]?=" "" XVERS ${PKG_CONFIG})
  65 #               set(RPM_EXTRA_DEP " ${XRULE} ${XVERS}")
  66 #               set(DEB_EXTRA_DEP " (${XRULE} ${XVERS})")
  67 #       endif()
  68 #       # Format for rpm package
  69 #       set(RPM_PKG_DEPS "${RPM_PKG_DEPS}BuildRequires: pkgconfig(${XPREFIX})${RPM_EXTRA_DEP}\n")
  70 #
  71 #       # Format for deb package
  72 #       # Because the tool "dpkg" is used on the packages db to find the
  73 #       # package providing the pkg-cong file ${XPREFIX}.pc, we need
  74 #       # to test the OS release package type
  75 #       # Only doable within a native environment not under SDK
  76 #       if( OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
  77 #               execute_process(
  78 #                       COMMAND dpkg -S *${XPREFIX}.pc
  79 #                                       OUTPUT_VARIABLE TMP_PKG_BIN
  80 #               )
  81 #               if(TMP_PKG_BIN)
  82 #                       string(REGEX REPLACE ":.*$" "" PKG_BIN ${TMP_PKG_BIN})
  83 #                       set(DEB_PKG_DEPS "${DEB_PKG_DEPS} ${PKG_BIN} ${DEB_EXTRA_DEP}")
  84 #               else()
  85 #                       message(FATAL_ERROR "-- ${Red}${XPREFIX} development files not installed. Abort.${ColourReset}")
  86 #               endif()
  87 #       endif()
  88 #endforeach()
  89 #
  90 #if(NOT EXISTS ${TEMPLATE_DIR}/rpm-config.spec.in)
  91 #       MESSAGE(FATAL_ERROR "${Red}Missing mandatory files: you need rpm-config.spec.in in ${TEMPLATE_DIR} folder.${ColourReset}")
  92 #endif()
  93 #
  94 ## Because the tool "dpkg" is used on the packages db to find the
  95 ## package providing the pkg-cong file ${XPREFIX}.pc, we need
  96 ## to test the OS release package type
  97 ## Only doable within a native environment not under SDK
  98 #if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
  99 #       add_custom_target(packaging_deb DEPENDS ${TEMPLATE_DIR}/debian.compat.in
 100 #                               ${TEMPLATE_DIR}/debian.changelog.in
 101 #                               ${TEMPLATE_DIR}/deb-config.dsc.in
 102 #                               ${TEMPLATE_DIR}/deb-config.install.in
 103 #                               ${TEMPLATE_DIR}/debian.control.in
 104 #                               ${TEMPLATE_DIR}/debian.rules.in
 105 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.compat.in              -DOUTFILE=${PACKAGING_DEB_OUTPUT_COMPAT}        -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 106 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.changelog.in   -DOUTFILE=${PACKAGING_DEB_OUTPUT_CHANGELOG}     -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 107 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.dsc.in             -DOUTFILE=${PACKAGING_DEB_OUTPUT_DSC}           -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 108 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.install.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_INSTALL}       -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 109 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.control.in             -DOUTFILE=${PACKAGING_DEB_OUTPUT_CONTROL}       -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 110 #               COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.rules.in               -DOUTFILE=${PACKAGING_DEB_OUTPUT_RULES}         -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 111 #       )
 112 #endif()
 113 #
 114 #add_custom_target(packaging)
 115 #set(PACKAGING_SPEC_OUTPUT ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec)
 116 #add_custom_target(packaging_rpm DEPENDS ${TEMPLATE_DIR}/rpm-config.spec.in
 117 #       COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/rpm-config.spec.in -DOUTFILE=${PACKAGING_SPEC_OUTPUT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 118 #)
 119 #add_dependencies(packaging packaging_rpm)
 120 #if(TARGET packaging_wgt)
 121 #       add_dependencies(packaging packaging_wgt)
 122 #endif()
 123 #if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
 124 #       # Target to add dependencies indirectly to "packaging" target.
 125 #       add_dependencies(packaging packaging_deb)
 126 #endif()
 127
 128 #Generate a cmake cache file usable by cmake script.
 129 set(CacheForScript ${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake)
 130 #Create a tmp cmake file.
 131 file(WRITE ${CacheForScript} "")
 132
 133 get_cmake_property(Vars VARIABLES)
 134 foreach(Var ${Vars})
 135         if(${Var})
 136                 #Replace unwanted char.
 137                 string(REPLACE "\\" "\\\\" VALUE ${${Var}})
 138                 string(REPLACE "\n" "\\n" VALUE ${VALUE})
 139                 string(REPLACE "\r" "\\n" VALUE ${VALUE})
 140                 string(REPLACE "\"" "\\\"" VALUE ${VALUE})
 141         endif()
 142         file(APPEND ${CacheForScript} "set(${Var} \"${VALUE}\")\n")
 143 endforeach()
 144
 145 # ----------------------------------------------------------------------------
 146 #                                Autobuild target
 147 # ----------------------------------------------------------------------------
 148
 149 add_custom_target(autobuild ALL DEPENDS ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in
 150         ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/linux/autobuild.in
 151         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 152         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 153 )