2 { "name": "Virtual J1939",
11 "comment": "Electronic Transmission Controller 1",
18 "Trns.Trque.Converter.Lockup.Engaged" : {
19 "generic_name": "Trns.Trque.Converter.Lockup.Engaged",
24 "comment": "State signal which indicates whether the torque converter lockup is engaged.",
25 "is_big_endian": false,
29 "TorqueConverterLockupDisengaged": [0],
30 "TorqueConverterLockupEngaged": [1],
35 "Trns.Trq.Cnvrtr.Lckp.Trnstn.In.Prcess" : {
36 "generic_name": "Trns.Trq.Cnvrtr.Lckp.Trnstn.In.Prcess",
41 "comment": "State signal indicating whether or not the transmission torque converter lock up clutch is transitioning between being",
42 "is_big_endian": false,
46 "TransitionIsNotInProcess": [0],
47 "TransitionIsInProcess": [1],
52 "Src.Addrss.Of.Ctrllng.Dvc.Fr.Trns.Cntrl" : {
53 "generic_name": "Src.Addrss.Of.Ctrllng.Dvc.Fr.Trns.Cntrl",
58 "comment": "The source address of the SAE J1939 device currently controlling the transmission.",
59 "is_big_endian": false,
63 "Momentary.Eng.Max.Power.Enable" : {
64 "generic_name": "Momentary.Eng.Max.Power.Enable",
69 "comment": "Momentarily Requesting highest torque map from the engine control",
70 "is_big_endian": false,
74 "notRqingMaxPowerAvailable": [0],
75 "mmntarilyRqingMaxPowerAvailable": [1],
80 "Trans.Input.Shaft.Speed" : {
81 "generic_name": "Trans.Input.Shaft.Speed",
86 "comment": "Rotational velocity of the primary shaft transferring power into the transmission.",
88 "is_big_endian": false,
92 "Progressive.Shift.Disable" : {
93 "generic_name": "Progressive.Shift.Disable",
98 "comment": "Command signal used to indicate that progressive shifting by the engine should be disallowed.",
99 "is_big_endian": false,
103 "ProgressiveShiftIsNotDisabled": [0],
104 "ProgressiveShiftIsDisabled": [1],
109 "Eng.Momentary.Overspeed.Enable" : {
110 "generic_name": "Eng.Momentary.Overspeed.Enable",
115 "comment": "Command signal used to indicate that the engine speed may be boosted up to the maximum engine overspeed value to",
116 "is_big_endian": false,
120 "MomentaryEngOverspeedIsDisabled": [0],
121 "MomentaryEngOverspeedIsEnabled": [1],
126 "Percent.Clutch.Slip" : {
127 "generic_name": "Percent.Clutch.Slip",
132 "comment": "Parameter which represents the ratio of input shaft speed to current engine speed (in percent).",
134 "is_big_endian": false,
138 "Trans.Output.Shaft.Speed" : {
139 "generic_name": "Trans.Output.Shaft.Speed",
144 "comment": "Calculated speed of the transmission output shaft.",
146 "is_big_endian": false,
150 "Trans.Shift.In.Process" : {
151 "generic_name": "Trans.Shift.In.Process",
156 "comment": "Indicates that the transmission is in process of shifting from the current gear to the selected gear.",
157 "is_big_endian": false,
161 "ShiftIsNotInProcess": [0],
162 "ShiftInProcess": [1],
167 "Trans.Driveline.Engaged" : {
168 "generic_name": "Trans.Driveline.Engaged",
173 "comment": "Driveline engaged indicates the transmission controlled portion of the driveline is engaged sufficiently to allow a transfer",
174 "is_big_endian": false,
178 "DrivelineDisengaged": [0],
179 "DrivelineEngaged": [1],
187 "comment": "Electronic Engine Controller 1",
194 "Src.AddrssOf.Ctrllng.Dvc.Fr.Eng.Cntrl" : {
195 "generic_name": "Src.AddrssOf.Ctrllng.Dvc.Fr.Eng.Cntrl",
200 "comment": "The source address of the SAE J1939 device currently controlling the engine.",
201 "is_big_endian": false,
204 "Actl.Eng.Prcnt.Trque.High.Resolution" : {
205 "generic_name": "Actl.Eng.Prcnt.Trque.High.Resolution",
210 "comment": "This parameter displays an additional torque in percent of the reference engine torque.",
212 "is_big_endian": false,
218 "1111NotAvailable": [8]
221 "Eng.Demand.Percent.Torque" : {
222 "generic_name": "Eng.Demand.Percent.Torque",
227 "comment": "The requested torque output of the engine by all dynamic internal inputs, including smoke control, noise control and low",
229 "is_big_endian": false,
232 "Eng.Starter.Mode" : {
233 "generic_name": "Eng.Starter.Mode",
238 "comment": "There are several phases in a starting action and different reasons why a start cannot take place.",
239 "is_big_endian": false,
243 "starterActiveGearNotEngaged": [1],
244 "starterActiveGearEngaged": [2],
245 "strtFnshdStrtrNtActvAftrHvngBnA": [3],
246 "strtrInhbtdDToEngAlreadyRunning": [4],
247 "strtrInhbtdDTEngNtReadyForStart": [5],
248 "strtrInhbtdDTDrvlnEnggdOthrTrns": [6],
249 "strtrInhbtdDToActiveImmobilizer": [7],
250 "strtrInhbtdDueToStarterOvertemp": [8],
252 "starterInhibitedReasonUnknown": [12],
258 "generic_name": "Eng.Speed",
263 "comment": "Actual engine speed which is calculated over a minimum crankshaft angle of 720 degrees divided by the number of cylinders.",
265 "is_big_endian": false,
268 "Actual.Eng.Percent.Torque" : {
269 "generic_name": "Actual.Eng.Percent.Torque",
274 "comment": "The calculated output torque of the engine.",
276 "is_big_endian": false,
279 "Drivers.Demand.Eng.Percent.Torque" : {
280 "generic_name": "Drivers.Demand.Eng.Percent.Torque",
285 "comment": "The requested torque output of the engine by the driver.",
287 "is_big_endian": false,
290 "Eng.Torque.Mode" : {
291 "generic_name": "Eng.Torque.Mode",
296 "comment": "State signal which indicates which engine torque mode is currently generating, limiting, or controlling the torque.",
297 "is_big_endian": false,
300 "Low idle governor/no request (de": [0],
301 "Accelerator pedal/operator selec": [1],
302 "Cruise control": [2],
304 "Road speed governor": [4],
306 "Transmission control": [6],
308 "Torque limiting": [8],
309 "High speed governor": [9],
310 "Braking system": [10],
311 "Remote accelerator": [11],
312 "Not available": [15]
318 "comment": "Engine Hours, Revolutions",
325 "Eng.Total.Revolutions" : {
326 "generic_name": "Eng.Total.Revolutions",
331 "comment": "Accumulated number of revolutions of engine crankshaft during its operation.",
333 "is_big_endian": false,
336 "Eng.Total.Hours.Of.Operation" : {
337 "generic_name": "Eng.Total.Hours.Of.Operation",
342 "comment": "Accumulated time of operation of engine.",
344 "is_big_endian": false,
350 "comment": "Vehicle Dynamic Stability Control 2",
357 "Steer.Wheel.Angle" : {
358 "generic_name": "Steer.Wheel.Angle",
361 "factor": 0.0009765625,
363 "comment": "The main operator`s steering wheel angle (on the steering column, not the actual wheel angle).",
365 "is_big_endian": false,
368 "Longitudinal.Acceleration" : {
369 "generic_name": "Longitudinal.Acceleration",
374 "comment": "Indicates the longitudinal acceleration of the vehicle.",
376 "is_big_endian": false,
379 "Lateral.Acceleration" : {
380 "generic_name": "Lateral.Acceleration",
383 "factor": 0.00048828125,
385 "comment": "Indicates a lateral acceleration of the vehicle.",
387 "is_big_endian": false,
391 "generic_name": "Yaw.Rate",
394 "factor": 0.0001220703125,
396 "comment": "Indicates the rotation about the vertical axis.",
398 "is_big_endian": false,
401 "Steer.Wheel.Angle.Sensor.Type" : {
402 "generic_name": "Steer.Wheel.Angle.Sensor.Type",
407 "comment": "Indicates whether the steering wheel angle sensor is capable of absolute measuring of the number of steering wheel",
408 "is_big_endian": false,
411 "RelativeMeasuringPrinciple": [0],
412 "AbsMeasuringPrinciple": [1],
417 "Steer.Wheel.Turn.Counter" : {
418 "generic_name": "Steer.Wheel.Turn.Counter",
423 "comment": "Indicates number of steering wheel turns, absolute position or relative position at ignition on.",
425 "is_big_endian": false,
431 "comment": "Wheel Speed Information",
438 "Rlative.Speed.Rear.Axle2.Right.Wheel" : {
439 "generic_name": "Rlative.Speed.Rear.Axle2.Right.Wheel",
444 "comment": "The speed of the rear axle #2, right wheel relative to the front axle speed, SPN 904.",
446 "is_big_endian": false,
449 "Relative.Speed.Rear.Axle2.Left.Wheel" : {
450 "generic_name": "Relative.Speed.Rear.Axle2.Left.Wheel",
455 "comment": "The speed of the rear axle #2, left wheel relative to the front axle speed, SPN 904.",
457 "is_big_endian": false,
460 "Rlative.Speed.Rear.Axle1.Right.Wheel" : {
461 "generic_name": "Rlative.Speed.Rear.Axle1.Right.Wheel",
466 "comment": "The speed of the rear axle #1, right wheel relative to the front axle speed, SPN 904.",
468 "is_big_endian": false,
471 "Relative.Speed.Rear.Axle1.Left.Wheel" : {
472 "generic_name": "Relative.Speed.Rear.Axle1.Left.Wheel",
477 "comment": "The speed of the rear axle #1, left wheel relative to the front axle speed, SPN 904.",
479 "is_big_endian": false,
482 "Rlative.Speed.Front.Axle.Right.Wheel" : {
483 "generic_name": "Rlative.Speed.Front.Axle.Right.Wheel",
488 "comment": "The speed of the front axle, right wheel relative to the front axle speed, SPN 904.",
490 "is_big_endian": false,
493 "Relative.Speed.Front.Axle.Left.Wheel" : {
494 "generic_name": "Relative.Speed.Front.Axle.Left.Wheel",
499 "comment": "The speed of the front axle, left wheel relative to the front axle speed, SPN 904.",
501 "is_big_endian": false,
504 "Front.Axle.Speed" : {
505 "generic_name": "Front.Axle.Speed",
508 "factor": 0.00390625,
510 "comment": "The average speed of the two front wheels.",
512 "is_big_endian": false,
518 "comment": "Engine Temperature 1",
526 "generic_name": "Eng.Fuel.Temp1",
531 "comment": "Temperature of fuel (or gas) passing through the first fuel control system.",
533 "is_big_endian": false,
536 "Eng.Intercooler.Thermostat.Opening" : {
537 "generic_name": "Eng.Intercooler.Thermostat.Opening",
542 "comment": "The current position of the thermostat used to regulate the temperature of the engine intercooler.",
544 "is_big_endian": false,
547 "Eng.Intercooler.Temp" : {
548 "generic_name": "Eng.Intercooler.Temp",
553 "comment": "Temperature of liquid found in the intercooler located after the turbocharger.",
555 "is_big_endian": false,
558 "Eng.Turbo.Oil.Temp" : {
559 "generic_name": "Eng.Turbo.Oil.Temp",
564 "comment": "Temperature of the turbocharger lubricant.",
566 "is_big_endian": false,
570 "generic_name": "Eng.Oil.Temp1",
575 "comment": "Temperature of the engine lubricant.",
577 "is_big_endian": false,
580 "Eng.Coolant.Temp" : {
581 "generic_name": "Eng.Coolant.Temp",
586 "comment": "Temperature of liquid found in engine cooling system.",
588 "is_big_endian": false,