docs/1_Getting_Started/3_Build_and_Boot_guide_Profile/1_Instrument_Cluster_(IC-IVI_with_Container_isolation).md

   1 # Build and Boot AGL Instrument Cluster demo image (IC-IVI with Container isolation)
   2 ## Required Equipments
   3 **1) Tested board:** **[Starter Kit Pro/M3](https://elinux.org/R-Car/Boards/M3SK) + [kingfisher support](https://elinux.org/R-Car/Boards/Kingfisher)**
   4
   5 **2) MicroUSB**
   6
   7 **3) MicroSD card**
   8 ## 0. Host PC environemnt
   9 **Build PC**
  10 Ubuntu OS (Tested version 18.04.6 LTS)
  11
  12 ## 1. Define Your Top-Level Directory
  13
  14 ```bash
  15 export AGL_TOP=$HOME/AGL
  16 mkdir -p $AGL_TOP
  17 ```
  18
  19 ## 2. Download the repo Tool and Set Permissions
  20
  21 ```bash
  22 mkdir -p $HOME/bin
  23 export PATH=$HOME/bin:$PATH
  24 curl https://storage.googleapis.com/git-repo-downloads/repo > $HOME/bin/repo
  25 chmod a+x $HOME/bin/repo
  26 ```
  27
  28 ## 3. Download the AGL Source Files
  29 - **AGL Version:** Magic Marlin
  30 ```bash
  31 cd $AGL_TOP
  32 mkdir marlin
  33 export AGL_TOP=$HOME/AGL/marlin
  34 cd $AGL_TOP
  35 git config --global user.email "you@example.com"
  36 git config --global user.name "Your Name"
  37 repo init -b marlin -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo
  38 repo sync
  39 ```
  40 - Optional: Specify the manifest file(marlin_13.0.0.xml) using -m option
  41
  42 ```bash
  43 repo init -b marlin -m marlin_13.0.0.xml -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo
  44 ```
  45 - Optional: Specify the master branch
  46 ```bash
  47 repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo
  48 ```
  49
  50 ## 4. Downloading Proprietary Drivers
  51 Downloading Proprietary Drivers from [Renesas-automotive-products](https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-h3-m3-documents-software)
  52 - To check the files to download
  53 ```bash
  54 grep -rn ZIP_.= $AGL_TOP/meta-agl/meta-agl-bsp/meta-rcar-gen3/scripts/setup_mm_packages.sh
  55 export XDG_DOWNLOAD_DIR=$HOME/Downloads
  56 ```
  57 - Download and copy Proprietary Drivers files (Run commands at downloaded files directory)
  58 ```bash
  59 cp R-Car_Gen3_Series_Evaluation_Software_Package_* $XDG_DOWNLOAD_DIR/
  60 chmod a+rw $XDG_DOWNLOAD_DIR/*.zip
  61 ```
  62 ## 5. Define Your Board
  63 - Supporting Starter Kit Pro/M3 + kingfisher Board (For other supported boards, check [Define Your Board](https://docs.automotivelinux.org/en/master/#0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3/))
  64 ```bash
  65 export MACHINE=m3ulcb-kf
  66 ```
  67 ## 6. Run the aglsetup.sh Script
  68 ```bash
  69 cd $AGL_TOP
  70 source meta-agl/scripts/aglsetup.sh -f -m $MACHINE -b $MACHINE agl-lxc
  71 ```
  72
  73 ## 7. Using BitBake
  74 ```bash
  75 bitbake lxc-host-image-demo
  76 ```
  77 - The build process puts the resulting image in the Build Directory
  78 ($AGL_TOP/m3ulcb-kf/tmp/deploy/images/m3ulcb)
  79 ## 8.Boot the Board (Deploying the AGL Demo Image)
  80 - To boot your image on the Renesas board, you need to do three things:
  81
  82 a) Update all [firmware](https://docs.automotivelinux.org/en/marlin/#0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3/#4-troubleshooting) on R-Car M3 Starter Kit board (Flashing firmware).
  83
  84 b) Prepare the MicroSD card and Flash image to the MicroSD card using [Etcher](https://www.balena.io/etcher/)
  85  (**image file name:** lxc-host-image-demo-m3ulcb-kf.wic.xz), then insert MicroSD card in the R-Car M3SK.
  86 c) Boot the board.
  87
  88 1) Use a MicroUSB cable to connect the PC to R-Car Starter Kit Pro (M3ULCB) board CN12 "CPLD/DEBUG"
  89 - Serial settings are 115200 8N1.
  90 - Run any standard terminal emulator program (e.g. minicom).
  91 [Replace **"Device"** with USB tty device name, for example **`/dev/ttyUSB0`**]
  92 ```bash
  93 sudo minicom -b 115200 -D "DEVICE"
  94 ```
  95
  96 - Power on the board
  97 - Quickly hit any key to get into the U-boot command prompt; you should see the following:
  98  ```bash
  99 Hit any key to stop autoboot:  0                                                                =>
 100 ```
 101 - Booting image command (for details check [How to boot](https://elinux.org/R-Car/AGL#Instrument_Cluster_with_Container_isolation_demo_image))
 102  ```bash
 103 ext4load 0x48080000 Image
 104 ext4load 0x48000000 /boot/r8a77961-ulcb-kf.dtb
 105 booti 0x48080000 - 0x48000000
 106 ```
 107
 108 # Run SoC board Screen
 109 A) Connect HDMI panel to M3SK(CN4) for **IVI Container**
 110 ![IVI](https://elinux.org/images/9/91/Marlin-lxc-Ivi.JPG)
 111
 112 B) Connect HDMI panel to Kingfisher(CN49)for **Cluster Container**
 113 ![IC](https://elinux.org/images/7/76/Marlin-lxc-Cluster.JPG)
 114
 115 <! -- https://elinux.org/images/thumb/7/76/Marlin-lxc-Cluster.JPG/1200px-Marlin-lxc-Cluster.JPG) -->
 116 # Reference webpages
 117  1. [eLinux](https://elinux.org/R-Car/AGL)
 118  1. [Kingfisher Board](https://elinux.org/R-Car/Boards/Kingfisher)
 119  1. [R-Car M3SK](https://elinux.org/R-Car/Boards/M3SK#Flashing_firmware)
 120  1. [agl reference machines](https://docs.automotivelinux.org/en/master/#1_hardware_support/overview/)
 121  1. [AGL Tech Day Presenation](https://static.sched.com/hosted_files/agltechday2022/3b/agl-techday-202204.pdf)
 122  1. [Build AGL Image](https://docs.automotivelinux.org/en/master/#0_Getting_Started/2_Building_AGL_Image/0_Build_Process/)
 123  1. [Building for Supported Renesas Boards](https://docs.automotivelinux.org/en/master/#0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3/)
 124