cmake/cmake.d/03-macros.cmake

   1 ###########################################################################
   2 # Copyright 2015, 2016, 2017 IoT.bzh
   3 #
   4 # author: Fulup Ar Foll <fulup@iot.bzh>
   5 # contrib: Romain Forlot <romain.forlot@iot.bzh>
   6 #
   7 # Licensed under the Apache License, Version 2.0 (the "License");
   8 # you may not use this file except in compliance with the License.
   9 # You may obtain a copy of the License at
  10 #
  11 #     http://www.apache.org/licenses/LICENSE-2.0
  12 #
  13 # Unless required by applicable law or agreed to in writing, software
  14 # distributed under the License is distributed on an "AS IS" BASIS,
  15 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 # See the License for the specific language governing permissions and
  17 # limitations under the License.
  18 ###########################################################################
  19
  20 #--------------------------------------------------------------------------
  21 #  WARNING:
  22 #     Do not change this cmake template
  23 #     Customise your preferences in "./conf.d/cmake/config.cmake"
  24 #--------------------------------------------------------------------------
  25 # CMake 3.6 imported macros to simulate list(FILTER ...) subcommand
  26 # -----------------------
  27 MACRO(PARSE_ARGUMENTS prefix arg_names option_names)
  28 SET(DEFAULT_ARGS)
  29 FOREACH(arg_name ${arg_names})
  30   SET(${prefix}_${arg_name})
  31 ENDFOREACH(arg_name)
  32 FOREACH(option ${option_names})
  33   SET(${prefix}_${option} FALSE)
  34 ENDFOREACH(option)
  35
  36 SET(current_arg_name DEFAULT_ARGS)
  37 SET(current_arg_list)
  38 FOREACH(arg ${ARGN})
  39   LIST_CONTAINS(is_arg_name ${arg} ${arg_names})
  40   IF (is_arg_name)
  41         SET(${prefix}_${current_arg_name} ${current_arg_list})
  42         SET(current_arg_name ${arg})
  43         SET(current_arg_list)
  44   ELSE (is_arg_name)
  45         LIST_CONTAINS(is_option ${arg} ${option_names})
  46         IF (is_option)
  47   SET(${prefix}_${arg} TRUE)
  48         ELSE (is_option)
  49   SET(current_arg_list ${current_arg_list} ${arg})
  50         ENDIF (is_option)
  51   ENDIF (is_arg_name)
  52 ENDFOREACH(arg)
  53 SET(${prefix}_${current_arg_name} ${current_arg_list})
  54 ENDMACRO(PARSE_ARGUMENTS)
  55
  56 MACRO(LIST_CONTAINS var value)
  57 SET(${var})
  58 FOREACH (value2 ${ARGN})
  59   IF (${value} STREQUAL ${value2})
  60         SET(${var} TRUE)
  61   ENDIF (${value} STREQUAL ${value2})
  62 ENDFOREACH (value2)
  63 ENDMACRO(LIST_CONTAINS)
  64
  65 MACRO(LIST_FILTER)
  66 PARSE_ARGUMENTS(LIST_FILTER "OUTPUT_VARIABLE" "" ${ARGV})
  67 # Check arguments.
  68 LIST(LENGTH LIST_FILTER_DEFAULT_ARGS LIST_FILTER_default_length)
  69 IF(${LIST_FILTER_default_length} EQUAL 0)
  70   MESSAGE(FATAL_ERROR "LIST_FILTER: missing list variable.")
  71 ENDIF(${LIST_FILTER_default_length} EQUAL 0)
  72 IF(${LIST_FILTER_default_length} EQUAL 1)
  73   MESSAGE(FATAL_ERROR "LIST_FILTER: missing regular expression variable.")
  74 ENDIF(${LIST_FILTER_default_length} EQUAL 1)
  75 # Reset output variable
  76 IF(NOT LIST_FILTER_OUTPUT_VARIABLE)
  77   SET(LIST_FILTER_OUTPUT_VARIABLE "LIST_FILTER_internal_output")
  78 ENDIF(NOT LIST_FILTER_OUTPUT_VARIABLE)
  79 SET(${LIST_FILTER_OUTPUT_VARIABLE})
  80 # Extract input list from arguments
  81 LIST(GET LIST_FILTER_DEFAULT_ARGS 0 LIST_FILTER_input_list)
  82 LIST(REMOVE_AT LIST_FILTER_DEFAULT_ARGS 0)
  83 FOREACH(LIST_FILTER_item ${${LIST_FILTER_input_list}})
  84   FOREACH(LIST_FILTER_regexp_var ${LIST_FILTER_DEFAULT_ARGS})
  85         FOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
  86           IF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
  87                 LIST(APPEND ${LIST_FILTER_OUTPUT_VARIABLE} ${LIST_FILTER_item})
  88           ENDIF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
  89         ENDFOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
  90   ENDFOREACH(LIST_FILTER_regexp_var)
  91 ENDFOREACH(LIST_FILTER_item)
  92 # If OUTPUT_VARIABLE is not specified, overwrite the input list.
  93 IF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
  94   SET(${LIST_FILTER_input_list} ${${LIST_FILTER_OUTPUT_VARIABLE}})
  95 ENDIF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
  96 ENDMACRO(LIST_FILTER)
  97
  98 # Generic useful macro
  99 # -----------------------
 100 macro(PROJECT_TARGET_ADD TARGET_NAME)
 101         set_property(GLOBAL APPEND PROPERTY PROJECT_TARGETS ${TARGET_NAME})
 102         set(TARGET_NAME ${TARGET_NAME})
 103 endmacro(PROJECT_TARGET_ADD)
 104
 105 macro(PROJECT_PKGDEP_ADD PKG_NAME)
 106         set_property(GLOBAL APPEND PROPERTY PROJECT_PKG_DEPS ${PKG_NAME})
 107 endmacro(PROJECT_PKGDEP_ADD)
 108
 109 macro(defstr name value)
 110         add_definitions(-D${name}=${value})
 111 endmacro(defstr)
 112
 113 macro(configure_files_in_dir dir)
 114         file(GLOB filelist "${dir}/*in")
 115         foreach(file ${filelist})
 116                 get_filename_component(filename ${file} NAME)
 117                 string(REGEX REPLACE "target" "${RSYNC_TARGET}" destinationfile ${filename})
 118                 string(REGEX REPLACE ".in$" "" destinationfile ${destinationfile})
 119                 configure_file(${file} ${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile})
 120                 set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile}")
 121         endforeach()
 122 endmacro(configure_files_in_dir)
 123
 124 # Create custom target dedicated for HTML5 and DATA AGL target type
 125 macro(add_input_files INPUT_FILES)
 126         if(NOT DEFINED XML_FILES)
 127                 set(ext_reg "xml$")
 128                 set(XML_LIST ${INPUT_FILES})
 129                 list_filter(XML_LIST ext_reg)
 130         endif()
 131         if(NOT DEFINED LUA_LIST)
 132                 set(ext_reg "lua$")
 133                 set(LUA_LIST ${INPUT_FILES})
 134                 list_filter(LUA_LIST ext_reg)
 135         endif()
 136         if(NOT DEFINED JSON_FILES)
 137                 set(ext_reg "json$")
 138                 set(JSON_LIST ${INPUT_FILES})
 139                 list_filter(JSON_LIST ext_reg)
 140         endif()
 141
 142         # These are v3.6 subcommand. Not used as default for now as
 143         # many dev use Ubuntu 16.04 which have only 3.5 version
 144         #list(FILTER XML_LIST INCLUDE REGEX "xml$")
 145         #list(FILTER LUA_LIST INCLUDE REGEX "lua$")
 146         #list(FILTER JSON_LIST INCLUDE REGEX "json$")
 147
 148         add_custom_target(${TARGET_NAME} ALL
 149         DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
 150         )
 151
 152         foreach(file ${XML_LIST})
 153                 add_custom_command(TARGET ${TARGET_NAME}
 154                         PRE_BUILD
 155                         WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
 156                         COMMAND which ${XML_CHECKER} > /dev/null 2>&1 && ${XML_CHECKER} ${file} || ${CMAKE_COMMAND} -E cmake_echo_color --red "Warning: XML_CHECKER not found"
 157                 )
 158         endforeach()
 159         foreach(file ${LUA_LIST})
 160         add_custom_command(TARGET ${TARGET_NAME}
 161                 PRE_BUILD
 162                 WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
 163                 COMMAND which ${LUA_CHECKER} > /dev/null 2>&1 && ${LUA_CHECKER} ${file} || ${CMAKE_COMMAND} -E cmake_echo_color --red "Warning: LUA_CHECKER not found"
 164         )
 165         endforeach()
 166         foreach(file ${JSON_LIST})
 167         add_custom_command(TARGET ${TARGET_NAME}
 168                 PRE_BUILD
 169                 WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
 170                 COMMAND which ${JSON_CHECKER} > /dev/null 2>&1 && ${JSON_CHECKER} ${file} || ${CMAKE_COMMAND} -E cmake_echo_color --red "Warning: JSON_CHECKER not found"
 171         )
 172         endforeach()
 173
 174         add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
 175         DEPENDS ${INPUT_FILES}
 176         COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
 177         COMMAND touch ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
 178         COMMAND cp -r ${INPUT_FILES} ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
 179         )
 180 endmacro()
 181
 182 # Set the name of the OPENAPI definition JSON file for binding v2
 183 macro(set_openapi_filename openapi_filename)
 184         set(OPENAPI_DEF ${openapi_filename} CACHE STRING "OpenAPI JSON file name used to generate binding header file before building a binding v2 target.")
 185 endmacro()
 186
 187 # Pre-packaging
 188 macro(project_targets_populate)
 189         # Default Widget default directory
 190         set(BINDIR bin)
 191         set(ETCDIR etc)
 192         set(LIBDIR lib)
 193         set(HTTPDIR htdocs)
 194         set(DATADIR data)
 195         set(PACKAGE_BINDIR  ${PROJECT_PKG_BUILD_DIR}/${BINDIR})
 196         set(PACKAGE_ETCDIR  ${PROJECT_PKG_BUILD_DIR}/${ETCDIR})
 197         set(PACKAGE_LIBDIR  ${PROJECT_PKG_BUILD_DIR}/${LIBDIR})
 198         set(PACKAGE_HTTPDIR ${PROJECT_PKG_BUILD_DIR}/${HTTPDIR})
 199         set(PACKAGE_DATADIR ${PROJECT_PKG_BUILD_DIR}/${DATADIR})
 200
 201         add_custom_command(OUTPUT ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR}
 202                 COMMAND mkdir -p ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})
 203         add_custom_target(populate DEPENDS ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})
 204
 205         INSTALL(CODE "execute_process(COMMAND make populate)")
 206         INSTALL(DIRECTORY ${PROJECT_PKG_BUILD_DIR}/
 207                 DESTINATION ${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}
 208         )
 209
 210         get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
 211         foreach(TARGET ${PROJECT_TARGETS})
 212         get_target_property(T ${TARGET} LABELS)
 213         if(T)
 214                 # Declaration of a custom command that will populate widget tree with the target
 215                 set(POPULE_PACKAGE_TARGET "project_populate_${TARGET}")
 216
 217                 get_target_property(P ${TARGET} PREFIX)
 218                 get_target_property(BD ${TARGET} BINARY_DIR)
 219                 get_target_property(SD ${TARGET} SOURCE_DIR)
 220                 get_target_property(OUT ${TARGET} OUTPUT_NAME)
 221
 222                 if(P MATCHES "NOTFOUND$")
 223                         if (${T} STREQUAL "BINDING")
 224                                 set(P "lib")
 225                         else()
 226                                 set(P "")
 227                         endif()
 228                 endif()
 229
 230                 if(${T} STREQUAL "BINDING")
 231                         list(APPEND BINDINGS_LIST "${P}${OUT}")
 232                         add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
 233                                 DEPENDS ${BD}/${P}${OUT}.so
 234                                 COMMAND mkdir -p ${PACKAGE_LIBDIR}
 235                                 COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
 236                         )
 237                         add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
 238                         add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 239                         add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 240                 elseif(${T} STREQUAL "BINDINGV2")
 241                         if (OPENAPI_DEF)
 242                                 add_custom_command(OUTPUT ${SD}/${OPENAPI_DEF}.h
 243                                         DEPENDS ${SD}/${OPENAPI_DEF}.json
 244                                         COMMAND afb-genskel ${SD}/${OPENAPI_DEF}.json > ${SD}/${OPENAPI_DEF}.h
 245                                 )
 246                                 add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OPENAPI_DEF}.h
 247                                         COMMENT "Generating OpenAPI header file ${OPENAPI_DEF}.h")
 248                                 add_dependencies(${TARGET} "${TARGET}_GENSKEL")
 249                         else()
 250                                 add_custom_command(OUTPUT ${SD}/${OUT}-apidef.h
 251                                         DEPENDS ${SD}/${OUT}-apidef.json
 252                                         COMMAND afb-genskel ${SD}/${OUT}-apidef.json > ${SD}/${OUT}-apidef.h
 253                                 )
 254                                 add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OUT}-apidef.h
 255                                         COMMENT "Generating OpenAPI header file ${OUT}-apidef.h")
 256                                 add_dependencies(${TARGET} "${TARGET}_GENSKEL")
 257                         endif()
 258
 259                         add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
 260                                         DEPENDS ${BD}/${P}${OUT}.so
 261                                         COMMAND mkdir -p ${PACKAGE_LIBDIR}
 262                                         COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
 263                                 )
 264                                 add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
 265                                 add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 266                                 add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 267                 elseif(${T} STREQUAL "EXECUTABLE")
 268                         add_custom_command(OUTPUT ${PACKAGE_BINDIR}/${P}${OUT}
 269                                 DEPENDS ${BD}/${P}${OUT}
 270                                 COMMAND mkdir -p ${PACKAGE_BINDIR}
 271                                 COMMAND cp ${BD}/${P}${OUT} ${PACKAGE_BINDIR}
 272                         )
 273                         add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_BINDIR}/${P}${OUT})
 274                         add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 275                         add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 276                 elseif(${T} STREQUAL "HTDOCS")
 277                         add_custom_command(OUTPUT ${PACKAGE_HTTPDIR}-xx
 278                                 DEPENDS ${BD}/${P}${OUT}
 279                                 COMMAND mkdir -p ${PACKAGE_HTTPDIR}
 280                                 COMMAND touch ${PACKAGE_HTTPDIR}
 281                                 COMMAND cp -r ${BD}/${P}${OUT}/* ${PACKAGE_HTTPDIR}
 282                         )
 283                         add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_HTTPDIR}-xx)
 284                         add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 285                         add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 286                 elseif(${T} STREQUAL "DATA")
 287                         # Generate list of output files instead of just one output directory
 288                         get_target_property(SF ${TARGET} SOURCES)
 289                         foreach(file ${SF})
 290                                 get_filename_component(JUST_FILENAME ${file} NAME)
 291                                 list(APPEND OUTPUT_FILES ${PACKAGE_DATADIR}/${JUST_FILENAME})
 292                         endforeach()
 293                         add_custom_target(${POPULE_PACKAGE_TARGET})
 294                         add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
 295                                 POST_BUILD
 296                                 COMMAND mkdir -p ${PACKAGE_DATADIR}
 297                                 COMMAND touch ${PACKAGE_DATADIR}
 298                                 COMMAND cp -r ${BD}/${TARGET} ${PACKAGE_DATADIR}
 299                         )
 300                         add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 301                         add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 302                         elseif(${T} STREQUAL "BINDING-CONFIG")
 303                         # Generate list of output files instead of just one output directory
 304                         get_target_property(SF ${TARGET} SOURCES)
 305                         foreach(file ${SF})
 306                                 get_filename_component(JUST_FILENAME ${file} NAME)
 307                                 list(APPEND OUTPUT_FILES ${PACKAGE_ETCDIR}/${JUST_FILENAME})
 308                         endforeach()
 309                         add_custom_target(${POPULE_PACKAGE_TARGET})
 310                         add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
 311                                 POST_BUILD
 312                                 COMMAND mkdir -p ${PACKAGE_ETCDIR}
 313                                 COMMAND touch ${PACKAGE_ETCDIR}
 314                                 COMMAND cp -r ${BD}/${TARGET}/* ${PACKAGE_ETCDIR}
 315                         )
 316                         add_dependencies(populate ${POPULE_PACKAGE_TARGET})
 317                         add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
 318                 endif(${T} STREQUAL "BINDING")
 319                 elseif(${CMAKE_BUILD_TYPE} MATCHES "[Dd][Ee][Bb][Uu][Gg]")
 320                         MESSAGE("${Yellow}.. Warning: ${TARGET} ignored when packaging.${ColourReset}")
 321                 endif()
 322         endforeach()
 323 endmacro(project_targets_populate)
 324
 325 macro(remote_targets_populate)
 326         if (DEFINED ENV{RSYNC_TARGET})
 327                 set (RSYNC_TARGET $ENV{RSYNC_TARGET})
 328         endif()
 329         if (DEFINED ENV{RSYNC_PREFIX})
 330                 set (RSYNC_PREFIX $ENV{RSYNC_PREFIX})
 331         endif()
 332
 333         set(
 334                 REMOTE_LAUNCH "Test on target with: ${CMAKE_CURRENT_BINARY_DIR}/target/start-on-${RSYNC_TARGET}.sh"
 335                 CACHE STRING "Command to start ${PROJECT_NAME} on remote target ${RSYNC_TARGET}"
 336         )
 337
 338         if(NOT RSYNC_TARGET OR NOT RSYNC_PREFIX)
 339                 message ("${Yellow}.. Warning: RSYNC_TARGET RSYNC_PREFIX not defined 'make remote-target-populate' not instanciated${ColourReset}")
 340                 add_custom_target(remote-target-populate
 341                         COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make remote-target-populate'${ColourReset}"
 342                         COMMAND exit -1
 343                 )
 344         else()
 345                 set(BINDINGS_REGEX "not_set")
 346                 if(DEFINED BINDINGS_LIST)
 347                         list(LENGTH BINDINGS_LIST BINDINGS_LIST_LENGTH)
 348                         if(BINDINGS_LIST_LENGTH EQUAL 1)
 349                                 list(GET BINDINGS_LIST 0 BINDINGS_REGEX)
 350                                 string(APPEND BINDINGS_REGEX ".so")
 351                         elseif(BINDINGS_LIST_LENGTH GREATER 1)
 352                                 foreach(B IN LISTS BINDINGS_LIST)
 353                                         STRING(APPEND BINDINGS_STR "${B}|")
 354                                 endforeach()
 355                                         STRING(REGEX REPLACE "^(.*)\\|$" "(\\1).so" BINDINGS_REGEX ${BINDINGS_STR})
 356                         endif()
 357                 endif()
 358
 359                 configure_files_in_dir(${TEMPLATE_DIR})
 360                 configure_files_in_dir(${TEMPLATE_DIR})
 361
 362                 add_custom_target(remote-target-populate
 363                         COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/*.sh
 364                         COMMAND rsync -e "ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null" --archive --delete ${PROJECT_PKG_BUILD_DIR}/ ${RSYNC_TARGET}:${RSYNC_PREFIX}/${PROJECT_NAME}
 365                 )
 366
 367                 add_custom_command(TARGET remote-target-populate
 368                 POST_BUILD
 369                 COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --green --bold ${REMOTE_LAUNCH}
 370                 )
 371
 372                 add_dependencies(remote-target-populate populate)
 373         endif()
 374 endmacro(remote_targets_populate)
 375
 376 macro(wgt_package_build)
 377         if(NOT EXISTS ${WIDGET_CONFIG_TEMPLATE})
 378                 MESSAGE(FATAL_ERROR "${Red}WARNING ! Missing mandatory files to build widget file.\nYou need a config.xml template: please specify WIDGET_CONFIG_TEMPLATE correctly.${ColourReset}")
 379         endif()
 380         if(NOT WIDGET_TYPE)
 381                 MESSAGE(FATAL_ERROR "WIDGET_TYPE must be set in your config.cmake.\neg.: set(WIDGET_TYPE application/vnd.agl.service)")
 382         endif()
 383         if(NOT DEFINED PROJECT_ICON)
 384                 if( ${WIDGET_TYPE} MATCHES "agl.native")
 385                         set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-native.png)
 386                 elseif( ${WIDGET_TYPE} MATCHES "agl.service")
 387                         set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-service.png)
 388                 elseif( ${WIDGET_TYPE} MATCHES "x-executable")
 389                         set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-qml.png)
 390                 elseif( ${WIDGET_TYPE} MATCHES "text/html")
 391                         set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-html5.png)
 392                 endif()
 393         elseif(EXISTS "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
 394                 set(ICON_PATH "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
 395         elseif(EXISTS "${WIDGET_ICON}")
 396                 set(ICON_PATH "${WIDGET_ICON}")
 397         else()
 398                 set(ICON_PATH ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/wgt/icon-default.png)
 399         endif()
 400
 401         if(NOT WIDGET_ENTRY_POINT)
 402                 set(WIDGET_ENTRY_POINT lib)
 403         endif()
 404
 405         add_custom_command(OUTPUT ${PROJECT_PKG_BUILD_DIR}/config.xml
 406                 COMMAND ${CMAKE_COMMAND} -DINFILE=${WIDGET_CONFIG_TEMPLATE} -DOUTFILE=${PROJECT_PKG_BUILD_DIR}/config.xml -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 407                 COMMAND cp ${ICON_PATH} ${PROJECT_PKG_BUILD_DIR}/${PROJECT_ICON}
 408
 409         )
 410         add_custom_target(packaging_wgt DEPENDS ${PROJECT_PKG_BUILD_DIR}/config.xml)
 411
 412         # Fulup ??? copy any extra file in wgt/etc into populate package before building the widget
 413         file(GLOB PROJECT_CONF_FILES "${TEMPLATE_DIR}/etc/*")
 414         if(${PROJECT_CONF_FILES})
 415                 file(COPY "${TEMPLATE_DIR}/etc/*" DESTINATION ${PROJECT_PKG_BUILD_DIR}/etc/)
 416         endif(${PROJECT_CONF_FILES})
 417
 418         add_custom_command(OUTPUT ${PROJECT_NAME}.wgt
 419                 DEPENDS ${PROJECT_TARGETS}
 420                 COMMAND wgtpkg-pack -f -o ${PROJECT_NAME}.wgt ${PROJECT_PKG_BUILD_DIR}
 421         )
 422
 423         add_custom_target(widget DEPENDS ${PROJECT_NAME}.wgt)
 424         add_dependencies(widget populate packaging_wgt)
 425         set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.wgt")
 426
 427         if(NOT RSYNC_TARGET)
 428                 message ("${Yellow}.. Warning: RSYNC_TARGET not defined 'make widget-target-install' not instanciated${ColourReset}")
 429                 add_custom_target(widget-target-install
 430                         COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make widget-target-install'${ColourReset}"
 431                         COMMAND exit -1
 432                 )
 433         else()
 434         configure_files_in_dir(${TEMPLATE_DIR})
 435         add_custom_target(widget-target-install
 436         DEPENDS widget
 437         COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
 438         COMMAND ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
 439         )
 440 endif()
 441
 442         if(PACKAGE_MESSAGE)
 443         add_custom_command(TARGET widget
 444                 POST_BUILD
 445                 COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
 446         endif()
 447 endmacro(wgt_package_build)
 448
 449 macro(rpm_package_build)
 450         add_custom_command(OUTPUT ${NPKG_PROJECT_NAME}.spec
 451                 DEPENDS ${PROJECT_TARGETS}
 452                                 archive
 453                                 packaging
 454                 COMMAND rpmbuild --define=\"%_sourcedir ${PROJECT_PKG_ENTRY_POINT}\" -ba  ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec
 455         )
 456
 457         add_custom_target(rpm DEPENDS ${NPKG_PROJECT_NAME}.spec)
 458         add_dependencies(rpm populate packaging)
 459
 460         if(PACKAGE_MESSAGE)
 461         add_custom_command(TARGET rpm
 462                 POST_BUILD
 463                 COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
 464         endif()
 465 endmacro(rpm_package_build)
 466
 467 macro(deb_package_build)
 468 #TODO
 469 endmacro(deb_package_build)
 470
 471 macro(project_package_build)
 472 #       if(EXISTS ${TEMPLATE_DIR})
 473 #               rpm_package_build()
 474 #       endif()
 475
 476         if(EXISTS ${TEMPLATE_DIR})
 477                 wgt_package_build()
 478         endif()
 479
 480 #       if(EXISTS ${TEMPLATE_DIR})
 481 #               deb_package_build()
 482 #       endif()
 483 endmacro(project_package_build)
 484
 485 macro(project_subdirs_add)
 486         set (ARGSLIST ${ARGN})
 487         list(LENGTH ARGSLIST ARGSNUM)
 488         if(${ARGSNUM} GREATER 0)
 489                 file(GLOB filelist "${ARGV0}")
 490         else()
 491         file(GLOB filelist "*")
 492         endif()
 493
 494         foreach(filename ${filelist})
 495                 if(EXISTS "${filename}/CMakeLists.txt")
 496                         add_subdirectory(${filename})
 497                 endif(EXISTS "${filename}/CMakeLists.txt")
 498         endforeach()
 499 endmacro(project_subdirs_add)
 500
 501 # Print developer helper message when build is done
 502 # -------------------------------------------------------
 503 macro(project_closing_msg)
 504         get_property(PROJECT_TARGETS_SET GLOBAL PROPERTY PROJECT_TARGETS SET)
 505         get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
 506         if(CLOSING_MESSAGE AND ${PROJECT_TARGETS_SET})
 507                 add_custom_target(${PROJECT_NAME}_build_done ALL
 508                         COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${CLOSING_MESSAGE}"
 509                 )
 510                 add_dependencies(${PROJECT_NAME}_build_done
 511                         ${PROJECT_TARGETS} populate)
 512         endif()
 513 endmacro()