cmake/cmake.d/03-extra_targets.cmake

   1 ###########################################################################
   2 # Copyright 2015, 2016, 2017 IoT.bzh
   3 #
   4 # author: Fulup Ar Foll <fulup@iot.bzh>
   5 # contrib: Romain Forlot <romain.forlot@iot.bzh>
   6 #
   7 # Licensed under the Apache License, Version 2.0 (the "License");
   8 # you may not use this file except in compliance with the License.
   9 # You may obtain a copy of the License at
  10 #
  11 #     http://www.apache.org/licenses/LICENSE-2.0
  12 #
  13 # Unless required by applicable law or agreed to in writing, software
  14 # distributed under the License is distributed on an "AS IS" BASIS,
  15 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 # See the License for the specific language governing permissions and
  17 # limitations under the License.
  18 ###########################################################################
  19
  20
  21 #--------------------------------------------------------------------------
  22 #  WARNING:
  23 #     Do not change this cmake template
  24 #     Customise your preferences in "./conf.d/cmake/config.cmake"
  25 #--------------------------------------------------------------------------
  26
  27 # Add a dummy target to enable global dependency order
  28 # -----------------------------------------------------
  29 if(EXTRA_DEPENDENCIES_ORDER)
  30         set(DEPENDENCIES_TARGET ${PROJECT_NAME}_extra_dependencies)
  31         add_custom_target(${DEPENDENCIES_TARGET} ALL
  32                 DEPENDS ${EXTRA_DEPENDENCY_ORDER}
  33         )
  34 endif()
  35
  36 # Add RSYNCTARGET
  37 remote_targets_populate()
  38
  39 # ----------------------------------------------------------------------------
  40 #                                Archive target
  41 # ----------------------------------------------------------------------------
  42 add_custom_command(OUTPUT  ${ARCHIVE_OUTPUT}
  43         DEPENDS ${PROJECT_TARGETS}
  44         #Create git archive of the main project
  45         COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git archive --format=tar --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/ HEAD -o ${ARCHIVE_OUTPUT_ARCHIVE}
  46         #Create tmp git archive for each submodule
  47         COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git submodule foreach --recursive ${CMD_ARCHIVE_SUBMODULE}
  48         #Concatenate main archive and tmp submodule archive
  49         COMMAND  for SUBTAR in ${TMP_ARCHIVE_SUBMODULE}-*.tar\; do tar --concatenate --file=${ARCHIVE_OUTPUT_ARCHIVE} $$SUBTAR\;done
  50         #Remove tmp submodule archive
  51         COMMAND rm -rf ${TMP_ARCHIVE_SUBMODULE}-*.tar
  52         #Compress main archive
  53         COMMAND gzip --force --verbose ${ARCHIVE_OUTPUT_ARCHIVE}
  54 )
  55 add_custom_target(archive DEPENDS ${ARCHIVE_OUTPUT})
  56
  57 # ----------------------------------------------------------------------------
  58 #                                Packaging target
  59 # ----------------------------------------------------------------------------
  60 #Format Build require package
  61 foreach (PKG_CONFIG ${PKG_REQUIRED_LIST})
  62         #Unset TMP variable
  63         unset(XPREFIX)
  64         unset(XRULE)
  65         unset(RPM_EXTRA_DEP)
  66         unset(DEB_EXTRA_DEP)
  67         #For deb package,add EOL format only for a new line
  68         if(DEB_PKG_DEPS)
  69                 set(DEB_PKG_DEPS "${DEB_PKG_DEPS},\n")
  70         endif()
  71         #Get pkg-config rule on version
  72         string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG})
  73         string(REGEX MATCH "[<>]?="  XRULE ${PKG_CONFIG})
  74         #Only if pkg-config has rule on version
  75         if(XRULE)
  76                 string(REGEX REPLACE ".*[<>]?=" "" XVERS ${PKG_CONFIG})
  77                 set(RPM_EXTRA_DEP " ${XRULE} ${XVERS}")
  78                 set(DEB_EXTRA_DEP " (${XRULE} ${XVERS})")
  79         endif()
  80         # Format for rpm package
  81         set(RPM_PKG_DEPS "${RPM_PKG_DEPS}BuildRequires: pkgconfig(${XPREFIX})${RPM_EXTRA_DEP}\n")
  82
  83         # Format for deb package
  84         # Because the tool "dpkg" is used on the packages db to find the
  85         # package providing the pkg-cong file ${XPREFIX}.pc, we need
  86         # to test the OS release package type
  87         # Only doable within a native environment not under SDK
  88         if( OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
  89                 execute_process(
  90                         COMMAND dpkg -S *${XPREFIX}.pc
  91                                         OUTPUT_VARIABLE TMP_PKG_BIN
  92                 )
  93                 #Need to be harden check
  94                 string(REGEX REPLACE ":.*$" "" PKG_BIN ${TMP_PKG_BIN})
  95                 set(DEB_PKG_DEPS "${DEB_PKG_DEPS} ${PKG_BIN} ${DEB_EXTRA_DEP}")
  96         endif()
  97 endforeach()
  98
  99 if(NOT EXISTS ${RPM_TEMPLATE_DIR}/rpm-config.spec.in)
 100         MESSAGE(FATAL_ERROR "${Red}Missing mandatory files: you need rpm-config.spec.in in ${RPM_TEMPLATE_DIR} folder.${ColourReset}")
 101 endif()
 102
 103 set(PACKAGING_SPEC_OUTPUT ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec)
 104 add_custom_command(OUTPUT ${PACKAGING_SPEC_OUTPUT}
 105         DEPENDS ${RPM_TEMPLATE_DIR}/rpm-config.spec.in
 106         COMMAND ${CMAKE_COMMAND} -DINFILE=${RPM_TEMPLATE_DIR}/rpm-config.spec.in -DOUTFILE=${PACKAGING_SPEC_OUTPUT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 107 )
 108
 109 # Because the tool "dpkg" is used on the packages db to find the
 110 # package providing the pkg-cong file ${XPREFIX}.pc, we need
 111 # to test the OS release package type
 112 # Only doable within a native environment not under SDK
 113 if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
 114         add_custom_command(OUTPUT ${PACKAGING_DEB_OUTPUT_DSC}
 115                                 ${PACKAGING_DEB_OUTPUT_INSTALL}
 116                                 ${PACKAGING_DEB_OUTPUT_CHANGELOG}
 117                                 ${PACKAGING_DEB_OUTPUT_COMPAT}
 118                                 ${PACKAGING_DEB_OUTPUT_CONTROL}
 119                                 ${PACKAGING_DEB_OUTPUT_RULES}
 120                 DEPENDS ${DEB_TEMPLATE_DIR}/debian.compat.in
 121                                 ${DEB_TEMPLATE_DIR}/debian.changelog.in
 122                                 ${DEB_TEMPLATE_DIR}/deb-config.dsc.in
 123                                 ${DEB_TEMPLATE_DIR}/deb-config.install.in
 124                                 ${DEB_TEMPLATE_DIR}/debian.control.in
 125                                 ${DEB_TEMPLATE_DIR}/debian.rules.in
 126                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.compat.in          -DOUTFILE=${PACKAGING_DEB_OUTPUT_COMPAT}        -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 127                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.changelog.in       -DOUTFILE=${PACKAGING_DEB_OUTPUT_CHANGELOG}     -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 128                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/deb-config.dsc.in         -DOUTFILE=${PACKAGING_DEB_OUTPUT_DSC}           -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 129                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/deb-config.install.in     -DOUTFILE=${PACKAGING_DEB_OUTPUT_INSTALL}       -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 130                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.control.in         -DOUTFILE=${PACKAGING_DEB_OUTPUT_CONTROL}       -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 131                                 COMMAND ${CMAKE_COMMAND} -DINFILE=${DEB_TEMPLATE_DIR}/debian.rules.in           -DOUTFILE=${PACKAGING_DEB_OUTPUT_RULES}         -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}        -P      ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 132         )
 133         add_custom_target(packaging_deb DEPENDS ${PACKAGING_DEB_OUTPUT_DSC}
 134                                                 ${PACKAGING_DEB_OUTPUT_INSTALL}
 135                                                 ${PACKAGING_DEB_OUTPUT_CHANGELOG}
 136                                                 ${PACKAGING_DEB_OUTPUT_COMPAT}
 137                                                 ${PACKAGING_DEB_OUTPUT_CONTROL}
 138                                                 ${PACKAGING_DEB_OUTPUT_CONTROL}
 139                                                 ${PACKAGING_DEB_OUTPUT_RULES})
 140 endif()
 141
 142 add_custom_target(packaging)
 143 add_custom_target(packaging_rpm DEPENDS ${PACKAGING_SPEC_OUTPUT})
 144 add_dependencies(packaging packaging_rpm)
 145 if(TARGET packaging_wgt)
 146         add_dependencies(packaging packaging_wgt)
 147 endif()
 148 if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
 149         # Target to add dependencies indirectly to "packaging" target.
 150         add_dependencies(packaging packaging_deb)
 151 endif()
 152
 153 #Generate a cmake cache file usable by cmake script.
 154 set(CacheForScript ${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake)
 155 #Create a tmp cmake file.
 156 file(WRITE ${CacheForScript} "")
 157
 158 get_cmake_property(Vars VARIABLES)
 159 foreach(Var ${Vars})
 160         if(${Var})
 161                 #Replace unwanted char.
 162                 string(REPLACE "\\" "\\\\" VALUE ${${Var}})
 163                 string(REPLACE "\n" "\\n" VALUE ${VALUE})
 164                 string(REPLACE "\r" "\\n" VALUE ${VALUE})
 165                 string(REPLACE "\"" "\\\"" VALUE ${VALUE})
 166         endif()
 167         file(APPEND ${CacheForScript} "set(${Var} \"${VALUE}\")\n")
 168 endforeach()
 169
 170 # ----------------------------------------------------------------------------
 171 #                                Autobuild target
 172 # ----------------------------------------------------------------------------
 173
 174 # Fake files output to avoid cleaning those files once generated.
 175 # Doing that target always trigger and regenerate files.
 176 add_custom_command(OUTPUT ${CMAKE_SOURCE_DIR}/conf.d/autobuild/agl/autobuildx
 177                         ${CMAKE_SOURCE_DIR}/conf.d/autobuild/linux/autobuildx
 178
 179         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 180         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 181         )
 182
 183 add_custom_target(autobuild ALL DEPENDS ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/agl/autobuild.in
 184         ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/linux/autobuild.in
 185         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 186         COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
 187 )