1 This README file contains information on the contents of the meta-agl-refhw-gen3
2 layer which provides support for the Renesas R-Car H3 based AGL reference
10 URI: git://git.openembedded.org/openembedded-core
14 URI: git://git.openembedded.org/meta-openembedded
15 layers: meta-oe, meta-python
18 URI: https://github.com/renesas-rcar/meta-renesas
19 branch: dunfell-Yocto-v4.1.0
25 I. Building with the layer in the AGL environment
26 II. Build agl-demo-platform by using meta-agl-refhw-gen3
27 III. Updating firmware
31 I. Adding the meta-agl-refhw-gen3 layer to your AGL environment
32 ===============================================================
34 This layer has been integrated into the AGL build environment for the UCB 11.0
35 (Kooky Koi) release, so manual integration is no longer required. See section
36 (II) below for how to build an image, and the "How to build the Firmware" section
37 in the document meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for how to
38 configure a standalone build without AGL.
41 II. Build for Reference Hardware
42 ================================
44 You should follow the instructions in the "Building for Supported Renesas Boards"
45 section on the AGL developer site to build images for the reference hardware.
47 Use the "h3ulcb" machine and "agl-refhw-h3" feature when configuring, e.g.:
50 $ source meta-agl/scripts/aglsetup.sh -m h3ulcb -b build \
51 agl-refhw-h3 agl-demo agl-devel
53 This works as the AGL reference hardware support activated by the "agl-refhw-h3"
54 feature integrates on top of the "h3ulcb" (or "h3ulcb-nogfx") machine support in
55 the AGL UCB tree. Note that it has not been tested with the "h3ulcb-kf" machine.
56 In the resulting build, the image can be used on the reference hardware by using
57 the DTB file "r8a7795-agl-refhw.dtb". In the reference hardware u-boot settings,
58 this can be done with the following (in case of booting from the Micro SD card
61 => setenv bootargs 'console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4'
62 => setenv bootcmd 'run load_ker; run load_dtb; booti 0x48080000 - 0x48000000'
63 => setenv load_dtb 'ext4load mmc 0:1 0x48000000 /boot/r8a7795-agl-refhw.dtb'
64 => setenv load_ker 'ext4load mmc 0:1 0x48080000 /boot/Image'
69 bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4
70 bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000
71 load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-agl-refhw.dtb
72 load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
76 III. Updating firmware
77 ======================
79 Please refer to meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for details.
84 1. SD#1 is not supported.