2 * Copyright (C) 2015, 2016, 2017 "IoT.bzh"
3 * Author "Romain Forlot" <romain.forlot@iot.bzh>
4 * Author "Loïc Collignon" <loic.collignon@iot.bzh>
6 * Licensed under the Apache License, Version 2.0 (the "License");
7 * you may not use this file except in compliance with the License.
8 * You may obtain a copy of the License at
10 * http://www.apache.org/licenses/LICENSE-2.0
12 * Unless required by applicable law or agreed to in writing, software
13 * distributed under the License is distributed on an "AS IS" BASIS,
14 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 * See the License for the specific language governing permissions and
16 * limitations under the License.
22 #include <linux/can/raw.h>
23 #include <linux/can/bcm.h>
26 #include "can-bus.hpp"
27 #include "can-message.hpp"
28 #include "../low-can-binding.hpp"
29 #include "canutil/write.h"
30 #include "../bitfield/bitfield.h"
32 /// @brief Class constructor
34 /// @param[in] dev_name - String representing the device name into the linux /dev tree
35 /// @param[in] index - integer identifier of the bus, set using init_can_dev from can_bus_t.
36 can_bus_dev_t::can_bus_dev_t(const std::string& dev_name, int index)
37 : device_name_{dev_name}, index_{index}
40 std::string can_bus_dev_t::get_device_name() const
45 int can_bus_dev_t::get_index() const
49 utils::socketcan_t& can_bus_dev_t::get_socket()
54 /// @brief Open the can socket and returning it
56 /// We try to open CAN socket and apply the following options
57 /// timestamp received messages and pass the socket to FD mode.
59 /// @return socket value or -1 if something wrong.
60 int can_bus_dev_t::open()
62 return can_socket_.open(device_name_);
65 /// @brief Set some option on the socket, timestamp and canfd frame usage.
66 void can_bus_dev_t::configure()
70 const int timestamp_on = 1;
72 DEBUG(binder_interface, "%s: CAN Handler socket correctly initialized : %d", __FUNCTION__, can_socket_.socket());
73 if (can_socket_.setopt(SOL_SOCKET, SO_TIMESTAMP, ×tamp_on, sizeof(timestamp_on)) < 0)
74 WARNING(binder_interface, "%s: setsockopt SO_TIMESTAMP error: %s", __FUNCTION__, ::strerror(errno));
78 ERROR(binder_interface, "open_raw: socket could not be created. Error was : %s", ::strerror(errno));
82 /// @brief Close the bus.
84 /// @return interger return value of socket.close() function
85 int can_bus_dev_t::close()
87 return can_socket_.close();
90 /// @brief Read the can socket and retrieve canfd_frame.
92 /// Read operation are blocking and we try to read CANFD frame
93 /// rather than classic CAN frame. CANFD frame are retro compatible.
94 can_message_t can_bus_dev_t::read()
97 struct canfd_frame cfd;
99 // Test that socket is really opened
102 ERROR(binder_interface, "read: Socket unavailable. Closing thread.");
106 nbytes = ::read(can_socket_.socket(), &cfd, CANFD_MTU);
108 // if we did not fit into CAN sized messages then stop_reading.
109 if (nbytes != CANFD_MTU && nbytes != CAN_MTU)
111 if (errno == ENETDOWN)
112 ERROR(binder_interface, "read: %s CAN device down", device_name_.c_str());
113 ERROR(binder_interface, "read: Incomplete CAN(FD) frame");
114 ::memset(&cfd, 0, sizeof(cfd));
117 DEBUG(binder_interface, "%s: Found id: %X, length: %X, data %02X%02X%02X%02X%02X%02X%02X%02X", __FUNCTION__, cfd.can_id, cfd.len,
118 cfd.data[0], cfd.data[1], cfd.data[2], cfd.data[3], cfd.data[4], cfd.data[5], cfd.data[6], cfd.data[7]);
119 return can_message_t::convert_from_canfd_frame(cfd, nbytes);
122 /// @brief Create a RX_SETUP receive job using the BCM socket.
124 /// @return 0 if ok else -1
125 int can_bus_dev_t::create_rx_filter(const can_signal_t& s)
127 uint32_t can_id = s.get_message().get_id();
129 struct utils::canfd_bcm_msg bcm_msg;
131 uint8_t bit_size = s.get_bit_size();
132 float val = (float)exp2(bit_size)-1;
134 bcm_msg.msg_head.opcode = RX_SETUP;
135 bcm_msg.msg_head.can_id = can_id;
136 bcm_msg.msg_head.nframes = 1;
137 bitfield_encode_float(val, s.get_bit_position(), bit_size, s.get_factor(), s.get_offset(), bcm_msg.frames[0].data, CANFD_MAX_DLEN);
139 if(can_socket_ << bcm_msg)
144 /// @brief start reading threads and set flag is_running_
145 /// @param[in] can_bus reference can_bus_t. it will be passed to the thread to allow using can_bus_t queue.
146 void can_bus_dev_t::start_reading(can_bus_t& can_bus)
148 DEBUG(binder_interface, "%s: Launching reading thread", __FUNCTION__);
150 th_reading_ = std::thread(&can_bus_dev_t::can_reader, this, std::ref(can_bus));
151 if(!th_reading_.joinable())
155 /// @brief stop the reading thread setting flag is_running_ to false and and wait that the thread finish its job.
156 void can_bus_dev_t::stop_reading()
161 /// @brief Thread function used to read the can socket.
162 /// @param[in] can_bus - object to be used to read the can socket
163 void can_bus_dev_t::can_reader(can_bus_t& can_bus)
167 can_message_t msg = read();
169 std::lock_guard<std::mutex> can_message_lock(can_bus.get_can_message_mutex());
170 can_bus.push_new_can_message(msg);
172 can_bus.get_new_can_message_cv().notify_one();
176 /// @brief Send a can message from a can_message_t object.
177 /// @param[in] can_msg - the can message object to send
179 /// @return 0 if message snet, -1 if something wrong.
180 int can_bus_dev_t::send(can_message_t& can_msg)
183 f = can_msg.convert_to_canfd_frame();
190 ERROR(binder_interface, "%s: Sending CAN frame failed.", __FUNCTION__);
196 ERROR(binder_interface, "%s: socket not initialized. Attempt to reopen can device socket.", __FUNCTION__);
203 /// @brief Static method used to send diagnostic CAN message
204 /// that follow isotp SendShimsMessage signature. This method is launched
205 /// from diagnostic manager's' same name method. It will use the diagnostic
206 /// manager configured CAN bus device to send the CAN message.
208 /// @param[in] arbitration_id - CAN arbitration id.
209 /// @param[in] data - CAN message payload to send
210 /// @param[in] size - size of the data to send
212 /// @return True if message sent, false if not.
213 bool can_bus_dev_t::shims_send(const uint32_t arbitration_id, const uint8_t* data, const uint8_t size)
217 f.can_id = arbitration_id;
219 ::memcpy(f.data, data, size);
226 ERROR(binder_interface, "send_can_message: Sending CAN frame failed.");
232 ERROR(binder_interface, "send_can_message: socket not initialized. Attempt to reopen can device socket.");