2 * Copyright (C) 2015, 2016 "IoT.bzh"
3 * Author "Romain Forlot" <romain.forlot@iot.bzh>
5 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at
9 * http://www.apache.org/licenses/LICENSE-2.0
11 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
25 #include "../can/can-bus.hpp"
26 #include "../can/can-message-set.hpp"
27 #include "../can/can-signals.hpp"
28 #include "../diagnostic/diagnostic-manager.hpp"
30 #include "low-can-hat.hpp"
33 /// @brief Class representing a configuration attached to the binding.
35 /// It regroups all needed objects instance from other class
36 /// that will be used along the binding life. It gets a global vision
37 /// on which signals are implemented for that binding.
38 /// Here, it is only the definition of the class with predefined accessors
39 /// methods used in the binding.
41 /// It will be the reference point to needed objects.
46 can_bus_t can_bus_manager_; ///< instanciate the CAN bus manager. It's the one in charge of initialize the CAN bus devices.
47 diagnostic_manager_t diagnostic_manager_; ///< Diagnostic manager use to manage diagnostic message communication.
48 uint8_t active_message_set_ = 0; ///< Which is the active message set ? Default to 0.
50 std::vector<std::shared_ptr<can_message_set_t> > can_message_set_; ///< Vector holding all message set from JSON signals description file
52 application_t(); ///< Private constructor with implementation generated by the AGL generator.
55 static application_t& instance();
57 can_bus_t& get_can_bus_manager();
59 const std::string get_diagnostic_bus() const;
61 diagnostic_manager_t& get_diagnostic_manager() ;
63 uint8_t get_active_message_set() const;
65 std::vector<std::shared_ptr<can_message_set_t> > get_can_message_set();
67 std::vector<std::shared_ptr<can_signal_t> > get_all_can_signals();
69 std::vector<std::shared_ptr<diagnostic_message_t> >& get_diagnostic_messages();
71 const std::vector<std::string>& get_signals_prefix() const;
73 std::vector<std::shared_ptr<can_message_definition_t> >& get_can_message_definition();
75 uint32_t get_signal_id(diagnostic_message_t& sig) const;
77 uint32_t get_signal_id(can_signal_t& sig) const;
79 void set_active_message_set(uint8_t id);
81 std::shared_ptr<diagnostic_message_t> get_diagnostic_message(const std::string& message_name) const;
82 DiagnosticRequest* get_request_from_diagnostic_message(const std::string& message_name) const;
84 /// TODO: implement this function as method into can_bus class
85 /// @brief Pre initialize actions made before CAN bus initialization
86 /// @param[in] bus A CanBus struct defining the bus's metadata
87 /// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
88 /// @param[in] buses An array of all CAN buses.
89 void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
90 /// TODO: implement this function as method into can_bus class
91 /// @brief Post-initialize actions made after CAN bus initialization
92 /// @param[in] bus A CanBus struct defining the bus's metadata
93 /// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
94 /// @param[in] buses An array of all CAN buses.
95 void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
96 /// TODO: implement this function as method into can_bus class
97 /// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
98 /// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
99 void logBusStatistics(can_bus_dev_t* buses, const int busCount);
100 /// TODO: implement this function as method into can_bus class
101 /// @brief Log transfer statistics about all active CAN buses to the debug log.
102 /// @param[in] buses An array of active CAN buses.
103 bool isBusActive(can_bus_dev_t* bus);